Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

NeutronRC AT32F435 Flight Controller (20×20 or 30×30)

£19.95 (ex VAT £16.63)

In stock

SKU: N-AT32F4-FC Category: Tags: , , , Brand:

The AT32F435 is like that humble cousin who turns out to be a rocket scientist. Look beyond its budget-friendly tag, and you’ll find performance that leaves even STM32 F4 blushing! #UnderdogOverachiever.

NeutronRC AT32F435 Flight Controller (20×20 or 30×30)

£19.95 (ex VAT £16.63)

In stock

The AT32F435 is like that humble cousin who turns out to be a rocket scientist. Look beyond its budget-friendly tag, and you’ll find performance that leaves even STM32 F4 blushing! #UnderdogOverachiever.

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: N-AT32F4-FC Category: Tags: , , , Brand:

Soaring through the Skies on a Shoestring: The NeutronRC AT32F435 Flight Controller

Looking for high performance at a fraction of the cost? Your search ends here. Take flight with the new NeutronRC AT32F435 Flight Controller. With a mounting pattern of 2020/30.530.5mm, this little whizzkid is set to revolutionise your drone piloting experience.

Please note, that official support will be added to Betaflight soon, for now you will need to download the firmware release and config tools directly from NeuronRC at the links below:

Let’s talk about the tech. The AT32F4 doesn’t just offer better bang for your buck compared to the standard STM32 MCU; it blasts the competition right out of the sky. It delivers performance that rivals the STM32 F4, and comes tantalisingly close to matching the STM32 F7. And the best part? It does all this without making your wallet weep.

This flight controller runs Betaflight. Yes, it requires a custom target for now, but don’t let that make your propellers droop. Betaflight 4.5 is on the horizon, and it should support the AT32 based flight controller natively. All you need is a dash of patience, and you’ll soon be receiving firmware updates directly from NeutronRC.

Just remember, this nifty piece of kit isn’t for the faint-hearted or the green-horned. If you’re a beginner, you might find the technical skills required to update the firmware a tad overwhelming. But for the experienced pilots among you – those who live to fly and fly to live – this is the upgrade you’ve been waiting for.

Product Highlights:

  1. Affordable high performance: Competes with STM32 F4 and STM32 F7 but at a budget-friendly price.
  2. Versatile mounting pattern: Suitable for a wide variety of FPV drones with a 2020/30.530.5mm setup.
  3. Runs on Betaflight: Gives you the flexibility and advanced features of Betaflight, but requires custom target.
  4. Future-ready: Poised to be supported natively by Betaflight 4.5, ensuring easier firmware updates.
  5. Perfect for experienced pilots: Ideal for drone enthusiasts with the technical know-how to keep their firmware up-to-date.

And remember, at Unmanned Tech, we’re not just about selling products – we’re about propelling your dreams into the sky. So, why wait? Upgrade to the NeutronRC AT32F435 Flight Controller and prepare for takeoff.

Product Tags: #NeutronRC #AT32F435 #FlightController #FPVDrone #UnmannedTech #AffordableFlightController #HighPerformance #BetaflightCompatible #DronePiloting #TechUpgrade

Only purchase this product if you are comfortable with flashing firmware and general electronics as this is aimed more at developers, as we can only offer very limited software level support, any technical queries will need to be directed to the manufacturer.

Product Highlights:

  1. Advanced MCU: Uses a powerful AT32F435CGU7 MCU, boasting a speed of 288M Hz and a 1MB Flash.
  2. Exceptional Stability: Integrates a BMI270 gyro driver for superior gyro calibration.
  3. Connectivity Options: Offers five Uarts (1,2,3,5,7) and one l2C.
  4. High-Quality Components: Uses the FD6288 3in1 driver and an 8-layer 20Z, 2-order blind via PCB.

Included

1x NeutronRC AT32F435 20×20/30×30 Flight Controller

Weight 50 g
Dimensions 5 × 5 × 1 cm
Current (Amps)

, ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: N-AT32F4-FC Category: Tags: , , , Brand:

Soaring through the Skies on a Shoestring: The NeutronRC AT32F435 Flight Controller

Looking for high performance at a fraction of the cost? Your search ends here. Take flight with the new NeutronRC AT32F435 Flight Controller. With a mounting pattern of 2020/30.530.5mm, this little whizzkid is set to revolutionise your drone piloting experience.

Please note, that official support will be added to Betaflight soon, for now you will need to download the firmware release and config tools directly from NeuronRC at the links below:

Let’s talk about the tech. The AT32F4 doesn’t just offer better bang for your buck compared to the standard STM32 MCU; it blasts the competition right out of the sky. It delivers performance that rivals the STM32 F4, and comes tantalisingly close to matching the STM32 F7. And the best part? It does all this without making your wallet weep.

This flight controller runs Betaflight. Yes, it requires a custom target for now, but don’t let that make your propellers droop. Betaflight 4.5 is on the horizon, and it should support the AT32 based flight controller natively. All you need is a dash of patience, and you’ll soon be receiving firmware updates directly from NeutronRC.

Just remember, this nifty piece of kit isn’t for the faint-hearted or the green-horned. If you’re a beginner, you might find the technical skills required to update the firmware a tad overwhelming. But for the experienced pilots among you – those who live to fly and fly to live – this is the upgrade you’ve been waiting for.

Product Highlights:

  1. Affordable high performance: Competes with STM32 F4 and STM32 F7 but at a budget-friendly price.
  2. Versatile mounting pattern: Suitable for a wide variety of FPV drones with a 2020/30.530.5mm setup.
  3. Runs on Betaflight: Gives you the flexibility and advanced features of Betaflight, but requires custom target.
  4. Future-ready: Poised to be supported natively by Betaflight 4.5, ensuring easier firmware updates.
  5. Perfect for experienced pilots: Ideal for drone enthusiasts with the technical know-how to keep their firmware up-to-date.

And remember, at Unmanned Tech, we’re not just about selling products – we’re about propelling your dreams into the sky. So, why wait? Upgrade to the NeutronRC AT32F435 Flight Controller and prepare for takeoff.

Product Tags: #NeutronRC #AT32F435 #FlightController #FPVDrone #UnmannedTech #AffordableFlightController #HighPerformance #BetaflightCompatible #DronePiloting #TechUpgrade

Only purchase this product if you are comfortable with flashing firmware and general electronics as this is aimed more at developers, as we can only offer very limited software level support, any technical queries will need to be directed to the manufacturer.

Product Highlights:

  1. Advanced MCU: Uses a powerful AT32F435CGU7 MCU, boasting a speed of 288M Hz and a 1MB Flash.
  2. Exceptional Stability: Integrates a BMI270 gyro driver for superior gyro calibration.
  3. Connectivity Options: Offers five Uarts (1,2,3,5,7) and one l2C.
  4. High-Quality Components: Uses the FD6288 3in1 driver and an 8-layer 20Z, 2-order blind via PCB.

Included

1x NeutronRC AT32F435 20×20/30×30 Flight Controller

Weight 50 g
Dimensions 5 × 5 × 1 cm
Current (Amps)

, ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

NeutronRC AT32F435 Flight Controller (20×20 or 30×30)

In stock