Feature:
-
Range: Indoor/Urban: up to 30m; Outdoor line-of-sight: up to 100m;
-
Receiver Sensitivity: -95dBm
-
Data Transmission Rate: 4800, 9600, 19200, 38400, 57600, 115200 (bps)
-
Working Frequency: unlicensed 2.4GHz band
-
Communication type: Point to Point or Start Network or Mesh Network
-
OTA support: update node’s firmware on-the-air
-
Easy-to-Use Serial Interface and rich extendable ports
-
Easy-to-Use AT Command: Setup ZigBee network, Set Serial Baud Rate, etc.
-
Open source Hardware and Firmware
-
Programmable 32-bit RISC CPU: 32M clock, 256KB Flash, 32KB RAM, 4KB EEPROM
-
Socket compatible with the Xbee, so you can plug it into any Xbee socket as a quick replacement.
Specification
-
Microprocessor :JN5168 (32-bit RISC CPU, 32MHz clock speed)
-
Resources :256kB/32kB/4kB (Flash/RAM/EEPROM)
-
PCB size :24.5mmx30.5mmx0.8mm
-
Outline Dimension :24.5mmx30.5mmx9.77mm
-
Indicators :No
-
Power supply :3.3V
-
IO counts :12
-
ADC input :3(2 multiplexing with IO)
-
Interfaces :UARTx2, SPI, I2C
-
Program interface :UART+MISO
-
Connectivity :Socket compatible with XBee
-
Communication Protocol :Uart(TTL)
-
Operating Frequency Band :2.4GHz
-
Stack/Software :RF4CE, JenNet-IP , ZigBee Pro
Resources
Reviews
There are no reviews yet.