Mesh Bee – Open Source Zigbee Pro Module with MCU (JN5168)

Feature:

• Range: Indoor/Urban: up to 30m; Outdoor line-of-sight: up to 100m;

• Receiver Sensitivity: -95dBm

• Data Transmission Rate: 4800, 9600, 19200, 38400, 57600, 115200 (bps)

• Working Frequency: unlicensed 2.4GHz band

• Communication type: Point to Point or Start Network or Mesh Network

• OTA support: update node’s firmware on-the-air

• Easy-to-Use Serial Interface and rich extendable ports

• Easy-to-Use AT Command: Setup ZigBee network, Set Serial Baud Rate, etc.

• Open source Hardware and Firmware

• Programmable 32-bit RISC CPU: 32M clock, 256KB Flash, 32KB RAM, 4KB EEPROM

• Socket compatible with the Xbee, so you can plug it into any Xbee socket as a quick replacement. 

Specification

• Microprocessor :JN5168 (32-bit RISC CPU, 32MHz clock speed)

• Resources :256kB/32kB/4kB (Flash/RAM/EEPROM)

• PCB size :24.5mmx30.5mmx0.8mm

• Outline Dimension :24.5mmx30.5mmx9.77mm

• Indicators :No

• Power supply :3.3V

• IO counts :12

• ADC input :3(2 multiplexing with IO)

• Interfaces :UARTx2, SPI, I2C

• Program interface :UART+MISO

• Connectivity :Socket compatible with XBee

• Communication Protocol :Uart(TTL)

• Operating Frequency Band :2.4GHz

• Stack/Software :RF4CE, JenNet-IP , ZigBee Pro

Resources 

• Mesh Bee firmware source code on Github 

• MeshBee Google discussion group

• MeshBee User’s manual v0.1

• MeshBee CookBook v0.1