Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Mauch MH076 HS-200-HV Current Sensor Board

£40.95 (ex VAT £34.13)

Only 1 left in stock

SKU: MH076 Category: Tag: Brand:

This is the Mauch S-200-HV a 200A Current measurement sensor board, based on Allegro Hall Sensor ACS-200U

Mauch MH076 HS-200-HV Current Sensor Board

£40.95 (ex VAT £34.13)

Only 1 left in stock

This is the Mauch S-200-HV a 200A Current measurement sensor board, based on Allegro Hall Sensor ACS-200U

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: MH076 Category: Tag: Brand:

The voltage reading of the LiPo is optimised for up to 14S LiPo packs.

This Sensor board needs a power supply. So please select the matching BEC according to your preference from our store.  The BEC will be needed to power the flight controller as well as the attached equipment like GPS, telemetry… etc.

Connected to the sensor are 2x10cm AWG10 wire (red) as a standard.

The board comes with 10cm connection cable (DF-13-6p <-> DF-13-6p) to the FC. If you need a customized cable in different length, then please order it separately.

Weight 10 g
Dimensions 5 × 5 × 1 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: MH076 Category: Tag: Brand:

The voltage reading of the LiPo is optimised for up to 14S LiPo packs.

This Sensor board needs a power supply. So please select the matching BEC according to your preference from our store.  The BEC will be needed to power the flight controller as well as the attached equipment like GPS, telemetry… etc.

Connected to the sensor are 2x10cm AWG10 wire (red) as a standard.

The board comes with 10cm connection cable (DF-13-6p <-> DF-13-6p) to the FC. If you need a customized cable in different length, then please order it separately.

Weight 10 g
Dimensions 5 × 5 × 1 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Mauch MH076 HS-200-HV Current Sensor Board

Only 1 left in stock