Matek PDB-XT60 w/ BEC 5V & 12V

When it comes to the best in power distribution, Matek systems are the people you go to if you are looking for a robust and well engineered power distribution solution you can trust.  This XT60 PDB is a 36x50mm, 4 layer PCB built with a included XT60 connector to make connecting your battery easy.  This PDB can handle 100A continuous current with bursts up to 140A without any problems.  Included on this PDB is a 2A 5V BEC and a second 0.5A 12V BEC to power any FPV gear you might have on your quadcopter.  This PDB supports 3-4S lipos.  Another great feature of the PDB is that it includes short circuit protection (for up to 10 seconds), which in itself can save you a lot of problems if you solder your battery connector the wrong way!

Because of the popularity of Matek products, there are loads of fakes on the market.  All products we sell under the Matek brand, are genuine.

Key Features

• Genuine Matek Systems PDB
• 2oz copper, 4-layers and 1.6mm PCB
• Built-in XT60 Socket
• Total 6 pairs ESC solder tabs are fit for H or X type frame
• 5V and 12V Output LED indicators
• Regulated 5V and 12V outputs
• Short circuit tolerant (for 10 seconds)

Specifications

• Input voltage range: 9 – 18V DC (3S-4S LiPoly operation)
• Output continuous current: 25Ax4 or 15Ax6
• Output Peak current (10 seconds/minute): 30Ax4 or 20Ax6
• BEC 5V output: 5V/2A (Max.2.5A 10s/minute)
• Output Ripple: 40mV (VIn= 16V, VOut= 5V@2A load)
• Short-circuit tolerant: 5 seconds/minute
• BEC 12V output (4S LiPoly, 13~18V DC): 12V/500mA (Max.0.8A 5s/minute) 
• BEC 12V output (3S LiPoly): =3S LiPoly voltage – 1V
• Dimensions: 36 x 50 x 4 mm (without XT60)
• Mounting: 30.5 x 30.5mm, Φ3mm
• Weight: 7.5g (w/o XT60), 11g (w/ XT60)