Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Matek Hall Current Sensor 150A

£14.70 (ex VAT £12.25)

Only 2 left in stock

SKU: M-HS150A Category: Brand:

Matek has made a current sensor for vehicles that do not have a built in current sensor or for those who want to not have any voltage drop or heat build up like can occur with traditional resistor based measuring techniques.

Matek Hall Current Sensor 150A

£14.70 (ex VAT £12.25)

Only 2 left in stock

Matek has made a current sensor for vehicles that do not have a built in current sensor or for those who want to not have any voltage drop or heat build up like can occur with traditional resistor based measuring techniques.

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: M-HS150A Category: Brand:

Sspecifications

  • Hall effect current sensor
  • No voltage drop and heat on current sensor components
  • Offset and Sensitivity are calibrated in factory
  • Continuous current rating: 0~150A DC
  • Sensitivity: 20mV/A,  INAV/BF scale = 200,  ArduPilot BATT_AMP_PERVLT = 50
  • VBAT voltage sense: 0~69V,  INAV scale = 2100,  BF scale = 210, ArduPilot BATT_VOLT_MULT = 21.0
  • Power Consumption: 17mA
  • Voltage offset error at zero current : +-10mV
  • Curr output voltage error: 5%
  • Operating Temperatures: -30~80 °C
  • 23 * 20* 23mm, 7g
  • step file HCS-150A_step.zip

Pinout

  • Vbat: for voltage sense, support 0~69V IN
  • Volt: = 1/21 Vbat, 0~3.3V out
  • Curr: Current signal, 0~3.3V out
  • 5V: power supply for HCS-150A board, support 4~13V IN, 17mA
  • G: GND
  • TX/RX: for firmware update and configure (to be supported)

Matek 150A Hall Current Sensor 3

Tips

  • mount Hall sensor far from iron and magnetic material

Included

  • 1 x Matek Hall Effect Current Sensor 150A
Weight 30 g
Dimensions 2 × 1 × 1 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: M-HS150A Category: Brand:

Sspecifications

  • Hall effect current sensor
  • No voltage drop and heat on current sensor components
  • Offset and Sensitivity are calibrated in factory
  • Continuous current rating: 0~150A DC
  • Sensitivity: 20mV/A,  INAV/BF scale = 200,  ArduPilot BATT_AMP_PERVLT = 50
  • VBAT voltage sense: 0~69V,  INAV scale = 2100,  BF scale = 210, ArduPilot BATT_VOLT_MULT = 21.0
  • Power Consumption: 17mA
  • Voltage offset error at zero current : +-10mV
  • Curr output voltage error: 5%
  • Operating Temperatures: -30~80 °C
  • 23 * 20* 23mm, 7g
  • step file HCS-150A_step.zip

Pinout

  • Vbat: for voltage sense, support 0~69V IN
  • Volt: = 1/21 Vbat, 0~3.3V out
  • Curr: Current signal, 0~3.3V out
  • 5V: power supply for HCS-150A board, support 4~13V IN, 17mA
  • G: GND
  • TX/RX: for firmware update and configure (to be supported)

Matek 150A Hall Current Sensor 3

Tips

  • mount Hall sensor far from iron and magnetic material

Included

  • 1 x Matek Hall Effect Current Sensor 150A
Weight 30 g
Dimensions 2 × 1 × 1 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Matek Hall Current Sensor 150A

Only 2 left in stock