Matek F722-HD Flight Controller (for DJI HD FPV)

The Matek F722-HD flight controller is designed to plug in directly to the DJI FPV Air unit to make your digital build easier than ever.  Since this FC is dedicated for HD, it does not have any analogue OSD module.  With 6 UARTS, 10 PWM outputs, MPU6000 and BMP280 Barometer this is a great FC for just about any build.  This FC also has dedicated targets for both Betaflight and Inav.

• F722-HD_Manual

Specifications

• MCU: 216MHz STM32F722RET6
• IMU: MPU6000 (SPI)
• Baro: BMP280 (I2C)
• Blackbox: 32M-byte Flash memory (SPI)
• OSD: Support external DJI OSD/FrskyOSD,  No Analog MAX7456 OSD built-in

• 6x Uarts with built-in inversion
• 1x Softserial_Tx option
• 10x Dshot/PWM outputs
• 1x I2C
• 4x ADC (VBAT, Current, RSSI, AirSpeed)
• 2x SH1.0_8pin connector (Vbat/G/Curr/Rx3/S1~S10)
• 1x SH1.0_6pin connector for DJI FPV Air Unit
• 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)

• Switchable 8V output

• PWM camera control: Yes
• TR/SA VTX control: Yes
• WS2812 Led Strip : Yes
• Beeper : Yes
• RSSI: Yes
• Analog Airspeed sensor: Yes
• Digital Airspeed sensor: Yes

Power

• Input: 9~36V (3~8S LiPo)
• BEC: 5V 2A cont. (Max.3A)
• BEC: 8V 2A cont. (Max.3A)
• LDO 3.3V: Max.200mA
• Battery Voltage Sensor: 1:10 (Scale 110)
• No Current Sensor built-in

FC Firmware

• BetaFlight unified target: MATEKF722HD(MTKS)
• INAV target: MATEKF722PX

Physical

• Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
• Dimensions: 36 x 36 x 5 mm
• Weight: 6.5g

Included

• 1x FC F722-PX
• 6x Silicon grommets M4 to M3
• 1x SH1.0_8pin cable 5cm