Marvelmind Super Beacon Outdoor (19kHz, 25kHz, 31kHz, 37kHz, 45kHz)
Features
- Marvelmind Super-Beacon-Outdoor (19kHz, 25kHz, 31kHz, 37kHz, 45kHz)
- Offers an outdoor version of the Super-Beacon
- Dual-use beacon: Receive and Transmit ultrasonic pulses
- Protected with special IP56-rated protective membrane
- Works with regular Beacons HW v4.9, Mini-RX and Industrial-RX
- Survives submersion into water
The Marvelmind Super-Beacon-Outdoor is an outdoor version of the Super-Beacon. Performance during the rain and dust exposure is not guaranteed and depends on the severity of the conditions.
As well, it is highly recommended to use external umbrellas and similar protection as well as periodic cleaning from dust to minimize the effect of long-term exposure to adverse environmental conditions.
The Super-Beacon has compound-sealed electronics and its sensors are protected with special IP56-rated protective membranes. Membranes bring additional minor losses to the ultrasound signal.
The Super-Beacon-Outdoor is a dual-use beacon – it can both receive and transmit ultrasonic pulses. The Super-Beacon-Outdoor can be used in the Non-Inverse Architecture (NIA), the Inverse Architecture (IA), and in the Multi-Frequency Non-Inverse Architecture (MF NIA).
The Super-Beacon-Outdoor can receive any ultrasonic frequency from the bands: 19 kHz, 25 kHz, 31 kHz, 37 kHz, 45 kHz. The filter can be simply selected in the Dashboard. It has a separate receiving part with a single wide-beam microphone and sharp DSP filters (like Mini-RX or Industrial-RX has).
Thus, it is more sensitive, than Beacon HW v4.9, more resistant to external noise. It is easier to set up because you don’t have to care about turning on and off ultrasonic sensors in order to optimize coverage vs. sensitivity.
Specifications
Distance between beacons
- Reaches up to 50 meters in lab conditions
- Recommended distance is up to 30 meters (RX4 to RX4)
- Range of stable tracking of Super-Beacon-Outdoor + Super-Beacon-Outdoor is 20-50% bigger than the range of Beacon HW v4.9 + Beacon HW v4.9 in the same conditions
Coverage area
- Reaches up to 1,000 m2 with the Starter Set configurations
- Coverage for larger territories is similar to cellular networks
Location precision
- Absolute: 1–3% of the distance to the beacons
- Differential precision: ±2 cm
- Differential precision is on par or better than in the Beacon HW v4.9, partially, because the sensor is a point – not as spread sensors of HW v4.9
Location update rate
Non-Inverse Architecture:
- 0.05–25 Hz
- Can be set manually or in automatic mode
- Depends on the distance between the mobile and stationary beacons (shorter distance – higher update rate)
- Depends on the number of mobile beacons
- Depends on the radio interface profile (500 kbps vs. 38 kbps)
Inverse Architecture:
- 0.05–25 Hz. Future SW releases are planned to support IMU fusion that will enable an update rate of up to 100 Hz
- Can be set manually or in automatic mode
- Depends on the distance between the mobile and stationary beacons (shorter distance — higher update rate)
- Doesn’t directly depend on the number of mobile beacons – all of them are receiving
- Depends on the radio interface profile (500 kbps vs. 38 kbps)
Power supply and battery lifetime
Internal:
LiPo battery 1,000 mAh
Battery lifetime totally depends on usage
Receiving beacon mode with 8 Hz update rate and 10 m sub-maps => up to 30h
Transmitting beacon with 1/10 Hz update rate => several months
External:
- micro-USB – recommended for permanent use
Weight
- 75 g (including 1,000 mAh battery, housing, and 50 mm antenna)
What’s Included
- 1 x Marvelmind Super-Beacon-Outdoor
Dimensions
Size
- 55 x 55 x 33 mm
-
Out of stock
Stock arriving soon£88.90 (ex VAT: £74.08) -
Out of stock
Restock in 2+ Weeks£109.00 (ex VAT: £90.83) -
Only 1 left in stock£329.00 (ex VAT: £274.17) -
Out of stock
Restock in 2+ Weeks£18.99 (ex VAT: £15.83)
User Reviews