Filter

Mamba F405 DJI Flight Controller (3-6S)

Name: Mamba F405 DJI Flight Controller (3-6S)
Brand: Diatone
SKU: F66-92B-DF6
Price: 24.95 GBP
Availability: InStock
Rating: 4.00 (1 reviews)

Rated 4.00 out of 5 based on 1 customer rating

(1 customer review)

£24.95 (£20.79 excl. VAT)

This flight controller takes everything you love about the Mamba F405 and adds plug and play support for the DJI FPV system (though a connector and higher rated BEC to power the air unit).

In stock

SKU: F66-92B-DF6 Category: CleanFlight / BetaFlight Tag: DJI FPV Brand: Diatone

This is the Mamba F405 flight controller designed to be plug and play compatible with the digital DJI FPV system. that is used on the many of the 2 and 3 inch quadcopters from Diatone. This runs the STM32F405 MCU and has the ability to run a 6S battery which is incredible for this size of quadcopter. It has a 6-axis, 8Khz MPU6000 vibration tolerant gyro as well as an in-built OSD if you do want to use an analogue system with it.

Specifications

Firmware Target: MAMBA F405US
Input: 3~6S Lipo (12.6~25V)
VTS Protection: Yes
BEC: 5V 2A & 9V 2A (Max 3A)
MCU: 168MHz STM32F405RGT6 32BIT
IMU: MPU6000
Baro: No
OSD: BF OSD
Blacbox: 16M Flash Memory
ESC Soft: Dshot300/600/1200
ESC Telemetry: RX6
LED: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V
UARTS:6 Ports
WS2812 LED Control
Betaflight LED Control &LED Controller: 4 Set 2812 LED
Buzzer support: Yes
Mounting: 30.5×30.5mm,Φ3
Weight: 7.5g

Includes

1x Mamba F405 DJI Flight Controller

Weight	10 g

1 review for Mamba F405 DJI Flight Controller (3-6S)

Rated 4 out of 5

cleggrohan (verified owner) – 30/07/2020

Very impressed with the quality of this flight controller.

It is powerful enough for what I need, The 9V regulator is very handy and means I can have double power filtering on my VTX which is nice.

If you want more futureproofing, I would look at getting the Foxeer F722 V2 Flight Controller as it is the same price and has an F7 chip onboard.

My only annoying thing about this board is that it doesn’t have SDA and SCL pins broken out, meaning that adding a compass is more tricky, but I think it can be done by remapping uarts.