Kotleta20 CAN bus BLDC ESC for Pixhawk

Features

• Excellent dynamic characteristics.
• Regenerative braking and active freewheeling.
• 500 W continuous power output at 8.8 g weight.
• Optional RPM control loop (RPM governor).
• Self diagnostics and health status reporting.
• Highly configurable.
• Low noise and low current ripple due to the low-ESR embedded filtering capacitors and high frequency PWM.
• Supported interfaces:
  • CAN (ISO 11898-2)
  • UART.
  • RCPWM (analog PWM interface widely used in robotics).
• High quality assurance:
• Protection against unlicensed (counterfeit) production by means of a digital signature installed on every manufactured unit.
• Open source firmware – Sapog (3-clause BSD license).

Resources

• Kotleta20 datasheet

Kit Contents (single ESC)

• 1 x Kotleta 20 ESC (Combo)
• 1 x 100 mm long 16 AWG wires(Red)
• 1 x 100 mm long 16 AWG wires(Black)
• 1 x Electrolytic capacito: 220uF 35v
• 1 x 4 to 4 pin cable (CAN)
• 1 x 6 to 6 pin cable(Debug)
• 1 x Micro termination plug

Kit Contents (pack of 4)

• 4 x Kotleta 20 ESC (Combo)
• 4 x 100 mm long 16 AWG wires(Red)
• 4 x 100 mm long 16 AWG wires(Black)
• 4 x Electrolytic capacito: 220uF 35v
• 4 x 4 to 4 pin cable (CAN)
• 1 x 6 to 6 pin cable(Debug)
• 1 x Micro termination plug