Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Jumper R8 Frsky Compatible Receiver for Pixhawk

£12.99 (ex VAT £10.83)

Out of stock
Item discontinued

Want to be notified when this product is back in stock?

SKU: CB9-ABC-9AF Category: Brand:

The Jumper R8 is a 2.4Ghz receiver that integrates MAVlink telemetry so you can show data from your Pixhawk/PX4 drone on your compatible radio like the Jumper T16, or Frsky Taranis.

Jumper R8 Frsky Compatible Receiver for Pixhawk

£12.99 (ex VAT £10.83)

Out of stock
Item discontinued

Want to be notified when this product is back in stock?

The Jumper R8 is a 2.4Ghz receiver that integrates MAVlink telemetry so you can show data from your Pixhawk/PX4 drone on your compatible radio like the Jumper T16, or Frsky Taranis.

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: CB9-ABC-9AF Category: Brand:

The R8 receiver is the first receiver that can directly transmit the PIX and PX4 flight control data to your R/C controller.  This can be used to display the flight control data directly on your radio.  Apart from this is it just like any other 8 channel SBUS/PWM R/C receiver.  Bottom line if you are looking for an R/C link to your Pixhawk drone, this is the receiver you should consider.

Key Features

  • More channels: 1-8 channels from traditional channel output, 1-16 channels from SBUS port
  • RSSI output: analog voltage output (03.3V)
  • Two-way full duplex transmission (Telemetry)
  • Weight: 10g
  • With RSSI output: analog voltage output (03.3V)

Specification

  • Number of channels: 8ch (PWM) / 16ch (SBUS)
  • RSSI (Signal Strength Indication) output: PWM
  • Operating voltage range: 4.0~8.4V
  • Operating current range: 100mA@5V
  • Effective distance: full distance (>2.0km)
  • Compatibility:
    • D8 mode
    • D16 mode

Resources

Binding

1. Press the bind button on the receiver, red/green LED solid on

2. On radio side, select Frsky D16 protocol (T12/T16: Multi Frsky D16);

3.When Red LED is flashing, binding succeeded.

4. After binding, withdraw the binding mode and power up the receiver again.  Green Led turns solid on.

LED Colours and meaning

  • the green light is always on: the signal is good.
  • the green light is blinking: the signal is bad.
  • the red light is always on: the signal is lost.
Weight 20 g
Dimensions 5 × 5 × 1 cm

Share this item on:

Product Meta Information:

SKU: CB9-ABC-9AF Category: Brand:

The R8 receiver is the first receiver that can directly transmit the PIX and PX4 flight control data to your R/C controller.  This can be used to display the flight control data directly on your radio.  Apart from this is it just like any other 8 channel SBUS/PWM R/C receiver.  Bottom line if you are looking for an R/C link to your Pixhawk drone, this is the receiver you should consider.

Key Features

  • More channels: 1-8 channels from traditional channel output, 1-16 channels from SBUS port
  • RSSI output: analog voltage output (03.3V)
  • Two-way full duplex transmission (Telemetry)
  • Weight: 10g
  • With RSSI output: analog voltage output (03.3V)

Specification

  • Number of channels: 8ch (PWM) / 16ch (SBUS)
  • RSSI (Signal Strength Indication) output: PWM
  • Operating voltage range: 4.0~8.4V
  • Operating current range: 100mA@5V
  • Effective distance: full distance (>2.0km)
  • Compatibility:
    • D8 mode
    • D16 mode

Resources

Binding

1. Press the bind button on the receiver, red/green LED solid on

2. On radio side, select Frsky D16 protocol (T12/T16: Multi Frsky D16);

3.When Red LED is flashing, binding succeeded.

4. After binding, withdraw the binding mode and power up the receiver again.  Green Led turns solid on.

LED Colours and meaning

  • the green light is always on: the signal is good.
  • the green light is blinking: the signal is bad.
  • the red light is always on: the signal is lost.
Weight 20 g
Dimensions 5 × 5 × 1 cm
Jumper R8 Frsky Compatible Receiver for Pixhawk

Out of stock
Item discontinued