Features
- Gold-plated plug
- MPU6000
- BlackBox: 8MB
- Vista HD Plug-and-Play. No need to solder tiny wires.
- BAT, +5V, 3.3, Start indicator
- Smartaudio & IRC Tramp VTX protocol supported
FC // SucceX-E F7 V1.4
- MCU: STM32F22RET6 216 MHz
- Gyro: MPU6000
- Baro: DPS310 (Barometer can only be used with Betaflight 4.3.0 and above)
- OSD: IFLIGHT OSD (AT7456E)
- BEC: 5V 2.5A
- BlackBox: 8MB
- Uart: 4*UART(UART1、UART2、UART4、UART5)
- UART1 for VTX HD/Analog Telemetry
- UART2 for Receiver
- UART4 for GPS
- UART5 for ESC Telemetry
- 4×Dshot/PWM outputs
- Smartaudio & IRC Tramp VTX protocol supported
- WS2812 led Strip: Yes
- Beeper: Yes
- Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0
- Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
- Weight: 6.9g
- Mounting hole: 30.5*30.5mm,φ4mm
- Size: 36*36mm
ESC // SucceX-E 45A V2 2-6S BLHeli_S 4-in-1 ESC
- Dimension: 36*43mm
- Mounting Holes: 30.5*30.5mm/Φ3mm
- Weight: 15g (without wire)
- Supports 2-6S Lipo input
- EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware
- Current sensor: YES
- BEC: NO
- Constant: 45A / Burst: 50A
- Supports: DShot150/300/600/MultiShot/OneShot etc.
- Target: G-H-30 BLS 16.7
Includes
- 1pc x SucceX-E 45A V2 2-6S BLHeli_S Dshot600 4-in-1 ESC
- 1pc x SucceX-E F7 Flight controller
- 1set x wire harness for F7 Flight controller
- 1pc x 8pin wire
- 1pc x 35v 470uF capacitor
- 8pcs x Silicone Grommets
- 1pc x XT60 connector with 14AWG wire
Reviews
There are no reviews yet.