iFlight Protek35 Analogue Cinematic Mini Quadcopter (PNP)
£179.95 (ex VAT £149.96)
Equipped with all new 2203.5 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to it’s 3inch predecessor which gives a lot more room for a lot more fun. Our GPS measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch outs or light freestyle moves.
This quadcopter does not have any receiver installed out of the box so you will need to add your own depending on what R/C system you are using.
Out of stock
Item discontinued
Want to be notified when this product is back in stock?
After our very popular 3inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.
Our all new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we’re talking about here…
ProTek is not necessarily just a Cinewhoop series but far more. Equipped with all new 2203.5 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to it’s 3inch predecessor which gives a lot more room for a lot more fun. Our GPS measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch outs or light freestyle moves.
A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimisation).
Durable plastic protectors with copper standoffs, portable compact design, easy accessible UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery
Features
- No Props or frame in view!
- High performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
- T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
- Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
- Low Resonance frame construction (Less Jello, more Cinematic footage)
- Caddx.us Turbo Eos V2 FPVCam 2.1mm 16:9 NTSC
- Butter smooth 2203.5 3600KV (4S)
- Pre-tuned with smooth freestyle settings
Factory Setup Files, Pinouts and Wiring Guides
Iflight have provided all of their factory dumps, along with frame assembly, and electronics wiring guides on their google drive folder
ProTek25 HD Quad BNF Included Components and Parts
- 1x ProTek35 Analog quadcopter BNF with Caddx.us Turbo Eos V2 FPVCam
- 2x TPU camera side plate soft mount
- 2x Nazgul 3535 propeller (Set of 4 – Color May Vary)
- 1x iFlight Lipo Strap 15*150mm (Color May Vary)
- 1x iFlight Lipo Strap 15*250mm (Color May Vary)
ProTek35 BNF Specs:
- – Board Beast Whoop F7 AIO 45A
- – Motor: XING 2203.5 3600KV (4S)
- – Wheelbase: 151mm
- – Body Size: 118*94.5mmmm
- – Bottom plate thickness: 3.5mm
- – Top plate thickness: 2mm
- – Top and bottom plate spacing: 20mm (aluminum standoff height)
- – Propeller size: 3.5 inch
- – FC pattern: 25.5*25.5mm / 20*20mmmm
- – FPV cam spacing: 20mm
- – Weight: 305g (without battery)
FC // Beast F7 AIO
Specification:
- MCU: BGA-STM32F745
- Gyro: MPU6000
- Blackbox: 8Mb Onboard Flash
- BEC output: 5V 2.5A
- Barometer: BMP280
- Connector: Micro-USB
- OSD: AT7456E
- FC Firmware：IFLIGHT_F745_AIO
- Mounting pattern: 25.5*25.5mm φ3mm
- Dimensions: 32.5*32.5mm
- Weight: 8.5g
ESC // 45A 2-6S
Specification:
- Uarts: 5
- Current Sensor: Yes
- Input: 2-6S LIPO
- Current scale: 200
- Constant: 45A / Burst: 50A
- BLHeli: BLHeli-S
- Telemetry: no
- ESC Firmware: BlheliS G-H-30
- Mounting pattern: 25.5*25.5mm/Φ3mm
- Dimensions: 32.5*32.5mm
VTX// SucceX Force 5.8g 800mW VTX Adjustable
- – The output power is stable;
- – Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
- – Output 48 frequency points,
- – Frequency lock fast, the boot does not interfere with companions;
- – Built-in output power self-check function;
- – Full format video format: NTSC /PAL;
- – Wide input voltage range. low power consumption:
- 7V～36V，+12V/380mA@800mW;
- – Small size:36*36*3mm
- – Mounting holes 4-M3
- – Lightweight: 7.2g(excluding antenna)
Additional Suggested Parts
- 4S 95C 1300mAh
- iFlight FPV Goggles with DVR Function
Important
A receiver is not included with this quadcopter, you will need to purchase and install your own that will require some soldering and configuration via Betaflight.
| Weight | 450 g |
|---|---|
| Dimensions | 10 × 10 × 5 cm |
| Prop Diameter |
Only logged in customers who have purchased this product may leave a review.
Delivery Information
- Free UK Delivery for orders over £100 The free shipping method uses Royal Mail’s RM48 service, batteries are excluded.
- Same Day Dispatch For orders placed before 3PM (UK Time) Mon-Fri Excluding Bank Holidays
- Need something Urgently? Select RM special delivery during checkout to have your order delivered next working day guaranteed (assuming you order before 15:00 when we are open)
Returns Information
- 30 Day Return Period If you change your mind you have up to 30 days to return something. Must be returned in as new condition
- 180 Day Warranty For items with a manufacturer defect or an issue resulting from damage during delivery to you. Consumable items such as batteries are excluded.
Related products
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
