iFlight Nazgul5 HD with Caddx Vista (BNF) (4S or 6S)
£285.32
Designed around the Caddx Vista HD FPv system, this Nazgul 5 quad gives you the ability to fly FPV with a crisp 720p FPV feed while not breaking the bank (too much anyway).
Caddx Vista system included and pre installed on this quad, Gopro camera and mount is not included and shown only for illustration purposes.
The Nazgul5 HD is a 5″ size BNF (Bind-and-Fly) quadcopter with the Caddx Vista Digital HD FPV system pre-installed. Pre-tuned and setup, all you need to do is bind your gear, configure your flight modes, plug in your battery and fly. The Xing-E motors offer loads of power and smooth flights thanks to their long-lasting NSK bearings. Had a hard hard crash and snapped an arm? Don’t worry, we stock spares . Wanna strap your GoPro on that beast as well? Be sure to add a mount using our 3D printing service.
Features
- 5mm arm design for more durability
- Easy-Swap arms
- LED illuminated Logo
- XING-E 2207 motors and NAZGUL 5140 props
- 5″ version also fits 5.1″ style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks
Specifications / Parts List
- SucceX-E F4 45A flight stack
- XING-E 2207 FPV Motor （6S 1800kv / 4S 2750kv)
- Wheelbase: 240mm*240mm
- Body size: 170*170mm
- Propeller size: 5 inch /5.1 inch
- FC pattern: 30.5*30.5/20*20 mm
- FPV cam spacing: 19mm
- Weight: 400.8g (without battery)
Factory Setup Files, Pinouts and Wiring Guides
Iflight have provided all of their factory dumps, along with frame assembly, and electronics wireing guides on their google drive folder
- Nazgul5 HD betaflight dumps
- Succex-E 45A ESC wiring guide and pinout
- Succex-E F4 FC wiring guide and pinout
Nazgul5 HD Quad BNF Included Components and Parts
- Prebuilt and tested Quadcopter
- 1x XL5 V5 Frame
- 1x Caddx Vista Digital HD System Kit
- 1x Albatross LHCP RP-SMA 5.8g antenna
- 2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
- 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
- 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
Suggested Extra Parts
The DJI Remote Controller is recommended for beginners since you won’t need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don’t choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.
Detailed Specs
FC // SucceX-E F4 Flight controller
– MCU：STM32F405
– Gyro：MPU6000
– Betaflight OSD：YES
– Blackbox：8MB
– 4X Uarts（1 2 3 6 )
– 8 x Dshot/Proshot/Oneshot output
– 8 x individual ESC power/ signal pads
– 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
– VTX telemetry: YES
– WS2812 led Strip：YES
– Baro：No
– Beeper：YES
– Input：2-6S（Max 8S）
– BEC：5V/2.5A cont
– Firmware target : BETAFLIGHTF4
– Mounting：30.5*30.5mm，φ4mm with Grommets φ3mm
– Dimensions：36*36mm
– Weight：7.6g
ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
– Dimension: 40*43mm
– Mounting Holes: 30.5*30.5mm/Φ3mm
– Weight: 14.4g
– Supports 2-6S Lipo input
– STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
– Current sensor: YES
– BEC: NO
– Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
– Target: G-H-30 BLS 16.7
| Weight | 600 g |
|---|---|
| Dimensions | 10 × 10 × 3 cm |
| Frame Size | |
| Prop Diameter | |
| Power Version | 4S Version (2450kV), 6S Version (1800kV) |
Only logged in customers who have purchased this product may leave a review.
You may also like…
FPV Goggles
R/C Transmitters
Related products
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Reviews
There are no reviews yet.