iFlight Nazgul Evoque F5 V2 HD Digital FPV Quadcopter (DJI O3)
£519.51 – £554.95
Get ready to soar with the all new Nazgul Evoque HD V2. This is the new and improved Bind-And-Fly drone from iFlight that makes it easy to get started flying like a pro! Featuring an upgraded frame, electronics and a new standard of durability and performance, you can count on your FPV experience being second to none with the integrated DJI O3 FPV system. Set aside your broomstick and get ready for iFlight’s amazing FPV experience!
Available in two configurations:
- F5X (Squashed X)
- F5D (DeadCat)
Out of the box, the Evoque HD F5 V2 will bind with your DJI FPV Remote Controller V2. The flight controller and drone does allow you to connect your own third-party receiver such as ELRS, Frsky, or Crossfire. This drone is compatible with the DJI FPV goggles V2 or DJI Goggles 2.
Features
Smooth and Powerful XING2 Motors
iFlight’s latest upgrade to their best-selling XING motors! The bell is made from a single piece of metal, the titanium shaft is reinforced with a strong metal bell joint, and the bell is made of 7075 aluminum, which is crash resistant. In addition to the smooth and long-lasting Japanese NSK bearings, the center slotted N52H curved arc magnets are protected by our XING O-ring bushing.
Latest Nazgul Frame for Maximum Protection
Getting your electronics covered in dirt and wet grass every time you crash is the old way of going. With our latest frame, you it is much harder to accumulate dirt and grass on your flight controller and ESC, making it less likely for your flight controller and ESC to fail or short out. Airflow that keeps your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and TPU protective parts that protect your components from all angles while giving your FPV quadcopter drone some style.
DJI O3 HD Air Unit Low-Latency digital transmission
Enjoy crisp and smooth real-time views in your goggles even in situations where interference is present, with a transmission range of up to 10 kilometers as claimed by DJI
4K Stabilised Video with 155° Ultra-Wide Angle
As well as delivering high-end stabilised imaging performance, the O3 onboard recorded video produces stunning visuals that will keep your audience engaged throughout the entire flight video.
Secured Battery Plug with Anti-Spark Filter
A spark can occur when you plug in a battery as the high battery current rushes into the low ESR capacitor, causing the ESC capacitor to fill up with enough capacitance to cause the spark at the connector. A protective circuit has been added to the XT60 connectors in your Nazgul V2 drone in order to protect them from rapid voltage or current spikes and extend the lifespan of your electronics.
Specially Designed Heatsink for DJI O3 HD Air Unit
The DJI O3 video transmitter has been upgraded to provide improved cooling performance via iFlights heatsync. A custom CNC heatsink has been added to ensure it dissipates heat efficiently at higher power levels.
Important
All iFlight BNFs are tested before shipment to guarantee highest quality.
If you still encounter a problem after receiving your drone, please immediately contact iFlight customer support at www.iflightrc.freshdesk.com.
Specifications
Product Name: Evoque F5 V2
- FC: BLITZ Mini F722 Flight Controller
- ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC
- Video Transmission: DJI O3 Air Unit
- Frame wheelbase: 225mm (Squashed X) / 223 mm (DeadCat)
- Motor: XING2 2207 motors
- Prop: Nazgul 5 inch propellers
- Weight：445grams
- Takeoff Weight：Approx. 610 g
- Dimensions (L×W×H)：180×180×80 mm
- Diagonal Distance：120 mm
- Max Speed：130 Km/h (Manual Mode)
- Maximum Takeoff Altitude：5000 m
- Max Hover Time：Approx. 8 mins
- Max Flight Distance：5 km
- Max Wind Speed Resistance：100 Km/H (Level 5)
- Operating Temperature Range：-10° to 40° C (14° to 104° F)
- Antennas：Dual Antennas
- GPS Sold Separately
Product Name：DJI O3 Air Unit
- Communication Frequency：2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
- Communication Bandwidth： Max 40 MHz
- Live View Quality and Latency
- With DJI FPV Goggles V2:
- 810p/120fps Video Transmission Quality: The video transmission latency is lower than 28 ms.
- 810p/60fps Video Transmission Quality: The video transmission latency is lower than 40 ms.
- With DJI Goggles 2:
- 1080p/100fps Video Transmission Quality: The video transmission latency is as low as 30 ms.
- 1080p/60fps Video Transmission Quality: The video transmission latency is as low as 40 ms.
- Max Video Transmission Bitrate：50 Mbps
- Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)
- Audio Transmission：N/A
Included
- 1 x Evoque F5 6S HD BNF
- 2 x Antennas
- 1 x Battery pad
- 2 x propeller (Pairs)
- 2 x Battery strap
| Weight | 600 g |
|---|---|
| Dimensions | 10 × 10 × 3 cm |
| Frame Size | |
| Prop Diameter | |
| Frame Version | |
| Colour | |
| Receiver | |
| Add GPS | No, Yes |
Only logged in customers who have purchased this product may leave a review.
Delivery Information
- Free UK Delivery for orders over £100 The free shipping method uses Royal Mail’s RM48 service, batteries are excluded.
- Same Day Dispatch For orders placed before 3PM (UK Time) Mon-Fri Excluding Bank Holidays
- Need something Urgently? Select RM special delivery during checkout to have your order delivered next working day guaranteed (assuming you order before 15:00 when we are open)
Returns Information
- 30 Day Return Period If you change your mind you have up to 30 days to return something. Must be returned in as new condition
- 180 Day Warranty For items with a manufacturer defect or an issue resulting from damage during delivery to you. Consumable items such as batteries are excluded.
You may also like…
R/C Transmitters
FPV Goggles
Related products
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
Pre-built Multicopters
HolyBro Kopis Mini FPV Quadcopter PNP (DJI FPV Air unit/ Caddx Air unit not included)
Reviews
There are no reviews yet.