iFlight Chimera7 Pro V2 HD 6S Long Range TBS Crossfire Quadcopter w/ DJI O3

This is the king of Long Range FPV! iFlight’s new frame and electronics along with the integrated DJI O3 Air Unit have enhanced the visual quality of FPV, making this another breakthrough in FPV visuals. With the 7.5-inch long-range iFlight Chimera, you can go places that you haven’t been able to before. The battery can be upgraded to allow you to fly for a longer period of time if you choose to surf the Swiss mountains! With our super stiff frame and XING2 2809 motors, the prop will be controlled perfectly at the 7.5 inch size.

Besides that, if you are into fast, massive flight, you will need a big battery top-mounted on top of the motor, or even a bigger battery bottom-mounted, 6 cells (6S 3300mAh) are recommended or 5 cells (5S 3.000mAh)  for slow longer endurance cruising. But for whatever style you fly, a Lipo or Lion pack will work just fine.

Out of the box, the Chimera7 Pro V2 will bind with your TBS Crossfire system.  The flight controller and drone does allow you to connect your own third-party receiver such as ELRS, Frsky, or Crossfire.  This drone is compatible with the DJI FPV goggles V2 or DJI Goggles 2.

Features

6 Inch Motors and Propellers for Longer Flight Times

The Evoque F6 is slightly larger, allowing you to use larger motors, props and batteries to give you longer flight times compared to the Nazgul F5.

Integrated GPS Module

Betaflight GPS Rescue Mode is ready to be configured (default OFF to prevent unexpected behavior; setup instructions are included in the package) and GPS functionality is available to find your way back. Custom iFlight 100mm LR antenna provides best coverage even over a long distance.

Smooth and Powerful XING2 Motors

iFlight’s XING motors have been upgraded to the latest version, no compromises were made! The XING O-ring bushing is protected by a titanium alloy shaft and reinforced bell joint, a 7075 aluminum bell that is crash resistant, smooth Japanese NSK bearings, center slotted N52H curved arc magnets as well as our durable unibell (one piece bell) technology.

Latest Chimera7 Frame for Maximum Protection

Getting your electronics dirty and wet every time you crash is over. With the new frame iFlight have designed, you will be able to prevent contamination from building up on your flight controller and ESCs, preventing short circuits and failure. With illuminated side panels and 360-degree TPU protective panels, you will not have to sacrifice any performance and weight in order to keep your components cool and clean.

TBS Crossfire for long range control

Integrated is a long range TBS corssfire receiver, to sensure you have maxium long range control of your drone.

DJI O3 HD Air Unit Low-Latency digital transmission

Enjoy crisp and smooth real-time views in your goggles even in situations where interference is present, with a transmission range of up to 10 kilometers as claimed by DJI

4K Stabilised Video with 155° Ultra-Wide Angle

As well as delivering high-end stabilised imaging performance, the O3 onboard recorded video produces stunning visuals that will keep your audience engaged throughout the entire flight video.

Secured Battery Plug with Anti-Spark Filter

A spark can occur when you plug in a battery as the high battery current rushes into the low ESR capacitor, causing the ESC capacitor to fill up with enough capacitance to cause the spark at the connector. A protective circuit has been added to the XT60 connectors in your Nazgul V2 drone in order to protect them from rapid voltage or current spikes and extend the lifespan of your electronics.

Specially Designed Heatsink for DJI O3 HD Air Unit

The DJI O3 video transmitter has been upgraded to provide improved cooling performance via iFlights heatsync. A custom CNC heatsink has been added to ensure it dissipates heat efficiently at higher power levels.