iFlight BLITZ E80 Single ESC 80A 2-8S

BLITZ E80 Single ESC – Power Meets Precision

The BLITZ E80 Single ESC is built for pilots who demand peak performance and reliability from their motors. Powered by a 32-bit G071 MCU clocked at 48MHz, this ESC provides ultra-smooth power delivery with quick response times, perfect for high-throttle maneuvers and precision flying. Featuring BLHeli32 firmware with support for DShot600, this ESC ensures seamless control, making your quad feel more responsive than ever.

To keep things stable and cool, the BLITZ E80 is equipped with 11 TDK MLCC capacitors, delivering a total of 240UF of low ESR (Equivalent Series Resistance) to reduce electrical noise. This results in cleaner signals and a smoother flying experience. Whether you’re pushing 2S for tight indoor flying or cranking up to 8S for outdoor speed, the BLITZ E80 ESC can handle continuous currents up to 80A, with bursts up to 100A for those critical moments.

With its 80A 8-layer 4oz copper PCB, high-grade NTMFS5C430NL MOSFETs, and thoughtful design (like large solder pads and countersinks), this ESC is built for durability and ease of installation. Plus, a built-in current sensor and telemetry support provide real-time data to keep you informed mid-flight.

Key Features:

• 32-bit G071 MCU: For faster response and smoother motor control
• 80A Continuous Current, 100A Burst: Power through high-throttle situations with confidence
• BLHeli32 Firmware: Fully customizable and supports DShot150/300/600, MultiShot, and OneShot
• 11 TDK MLCC Capacitors (240UF): Reduces noise and ensures more stable power delivery
• 2-8S Compatible: Supports a wide voltage range, perfect for different setups
• Current Sensor & Telemetry: Real-time data feedback for enhanced flight monitoring
• Durable Design: 8-layer 4oz copper PCB for improved heat dissipation and reliability

Specifications:

• Input Voltage: 2S-8S
• Continuous Current: 80A
• Burst Current: 100A
• MCU: G071, 48MHz
• Dimensions: 40 x 17 x 10mm
• Weight: 14.5g (±2g)
• Firmware: BLHeli32
• Telemetry: Supported
• Protocol: DShot150/300/600, MultiShot, OneShot, PWM
• Current Sensor: Yes

What’s in the Box:

• 1 x BLITZ E80 Single ESC
• 1 x 50V 470UF Capacitor
• 1 x Power Cables & ESC Signal Wires
• Note: Accessories may vary based on supply.

Important Notes:

• Ensure proper wiring and soldering before powering up.
• Use the included capacitor for added protection and cleaner power delivery.
• Double-check voltage range and current limits for your setup to prevent damage.