iFlight Alpha A75 Analog w/RunCam Nano2 Camera (FrSky D8)

Let’s welcome the iFlight Alpha series, a new way to fly FPV on the smallest possible whoop size quad? We did some tuning and tried to find the optimal ratio between weight and power. This is what we came up with to combine flight time efficiency with sufficient power.

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

Features

• 66.9 grams (without battery) 
• Butter smooth XING 1103 8000KV，more torque and efficiency 
• Ducts to protect the sensitive environment or yourself
• Pre-tuned with smooth cinematic settings
• iFlight Albatross 5.8G light antenna upgrade (included)

Specifications

• Prebuilt and tested Quadcopter
• 1x Alpha 78mm Frame
• 1x RaceCam R1 Micro 1200TVL 1.8mm 14*14
• 1x 5.8G SucceX Micro Force VTX 300mW
• 1x iFlight Albatross RHCP 5.8g light antenna
• 1set x HQ 40mm 1.6 inch 4-blades (Set of 2 – Color May Vary)
• 1set x Gemfan 40mm 1.6inch 1635 3-blades (Set of 2 – Color May Vary)
• 2x 10*130mm iFlight Lipo Strap

• Weight: 52.1g (without battery)
•  Battery: 3S 450mAh (not included)

FACTORY SETUP and WIRING DIAGRAM

This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some Betaflight tweaks to enhance the flight experience.

Reflashed your drone but didn’t backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK

FC // SucceX-D 20A F4 Whoop AIO

• Size：30.5*30.5mm
• Mounting pattern：25.5*25.5mm/φ3mm
• Connector：Micro-USB
• MCU：STM32F411
• Gyro：MPU6000
• Blackbox：8MB
• BEC output：5V 2A/10V 2A
• INA pad：UART2 (nR2)
• Barometer：no
• Constant current：20A，25A（Burst）
• Input：2-5S
• Current sensor：yes
• BLHeli：BLHeli-S
• ESC Telemetry：no
• Target：IFLIGHT_F411_PRO
• ESC Firmware：G-H-30 BLS

Additional Suggested Parts

• FPV Goggles
• Radio Controller – Based on Receiver Choice
• Battery 4S 450mAh

Important

The DJI Remote Controller is recommended for beginners since you won’t need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don’t choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.

Included

• Prebuilt and tested Quadcopter
• 1x Alpha 78mm Frame
• 1x RunCam Nano2 Camera 
• 1x 5.8G SucceX Micro Force VTX 300mW
• 1x iFlight Albatross RHCP 5.8g light antenna
• 1set x HQ 40mm 1.6 inch 4-blades (Set of 2 – Color May Vary)
• 1set x Gemfan 40mm 1.6inch 1635 3-blades (Set of 2 – Color May Vary)
• 2x 10*130mm iFlight Lipo Strap