Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

HolyBro X500 V2 500mm Quadcopter Frame

£104.31 (ex VAT £86.93)

In stock

SKU: E48-8DE-E3D Category: Tag: Brand:

X500V2 Frame full carbon fiber twill, new design and minimal assembly time. It is perfectly compatible with the Holybro Pixhawk5X and Pixhawk4. The kit is easy to assemble. No soldering needed.

HolyBro X500 V2 500mm Quadcopter Frame

£104.31 (ex VAT £86.93)

In stock

X500V2 Frame full carbon fiber twill, new design and minimal assembly time. It is perfectly compatible with the Holybro Pixhawk5X and Pixhawk4. The kit is easy to assemble. No soldering needed.

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: E48-8DE-E3D Category: Tag: Brand:

Specification

  • Wheelbase: 500mm
  • Motor mount pattern: 16x16mm
  • Frame Body: 144x144mm, 2mm thick
  • Landing gear height: 215mm
  • Space between top and bottom plates: 28mm
  • Weight: 610g

Assembly Guide

The X500 V2 Frame Kit is made with full carbon fiber twill, with carbon fiber tube arms supported by the newly designed fiber reinforced nylon connectors with convenient notches on both motor and body sides, providing a much easier & more straightforward installation. The landing gear consists of 16mm & 10mm diameter carbon fiber tubes with connectors that has been thickened and strengthened.

The spacing between top and bottom carbon fiber plates has been increased to provide an easier access. The platform board now has mounting holes for GPS & popular companion computers such as the Raspberry Pi 4 & Jetson Nano. The adjustable battery mounting board has been enlarged to support bigger batteries for longer flight time. The rail mounting system is ready to take a whole host of camera mounts and gimbals for various applications. There is an optional mount for various depth cameras such as the Intel RealSense series & Structure Core Depth Cameras (purchase separately). All tools for installation provided in box.

Included

  • Body – Full Carbon Fiber Top & Bottom plate (144 x 144mm, 2mm thick)
  • Arm – High strength & ultra-lightweight 16mm carbon fiber tubes with newly designed fiber reinforced nylon connectors
  • Landing gear – 16mm & 10mm diameter carbon fiber tubes with strengthened & improved plastic tee connectors.
  • Platform board – With mounting holes for GPS & popular companion computer such as the Raspberry Pi 4 & Jetson Nano
  • Dual 10mm Ø rod x 250 mm long rail mounting system
  • Battery mount with two Battery Straps
  • Hand tools for installation

Recommended Parts (Not Included):

  • Flight Controller – Pixhawk 5x, Pixhawk 4, Pixhawk 4 Mini, Durandal, Pix32 v5
  • Power Module – PM02D, PM02 V3
  • GPS – Holybro M8N/M9N GPS, H-RTK M8P/F9P Rover Lite & Helical
  • Battery – 4S 2000-5000mAh Lipo
  • Motors – 2216 920Kv Motors
  • ESC – 20A BLheli
  • Propellers – 1045

Flight time:  ~18 minutes hover with no additional payload. Tested with 5000mAh Battery & Holybro 2216 920 KV motors.

 

Weight 550 g
Dimensions 25 × 25 × 10 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: E48-8DE-E3D Category: Tag: Brand:

Specification

  • Wheelbase: 500mm
  • Motor mount pattern: 16x16mm
  • Frame Body: 144x144mm, 2mm thick
  • Landing gear height: 215mm
  • Space between top and bottom plates: 28mm
  • Weight: 610g

Assembly Guide

The X500 V2 Frame Kit is made with full carbon fiber twill, with carbon fiber tube arms supported by the newly designed fiber reinforced nylon connectors with convenient notches on both motor and body sides, providing a much easier & more straightforward installation. The landing gear consists of 16mm & 10mm diameter carbon fiber tubes with connectors that has been thickened and strengthened.

The spacing between top and bottom carbon fiber plates has been increased to provide an easier access. The platform board now has mounting holes for GPS & popular companion computers such as the Raspberry Pi 4 & Jetson Nano. The adjustable battery mounting board has been enlarged to support bigger batteries for longer flight time. The rail mounting system is ready to take a whole host of camera mounts and gimbals for various applications. There is an optional mount for various depth cameras such as the Intel RealSense series & Structure Core Depth Cameras (purchase separately). All tools for installation provided in box.

Included

  • Body – Full Carbon Fiber Top & Bottom plate (144 x 144mm, 2mm thick)
  • Arm – High strength & ultra-lightweight 16mm carbon fiber tubes with newly designed fiber reinforced nylon connectors
  • Landing gear – 16mm & 10mm diameter carbon fiber tubes with strengthened & improved plastic tee connectors.
  • Platform board – With mounting holes for GPS & popular companion computer such as the Raspberry Pi 4 & Jetson Nano
  • Dual 10mm Ø rod x 250 mm long rail mounting system
  • Battery mount with two Battery Straps
  • Hand tools for installation

Recommended Parts (Not Included):

  • Flight Controller – Pixhawk 5x, Pixhawk 4, Pixhawk 4 Mini, Durandal, Pix32 v5
  • Power Module – PM02D, PM02 V3
  • GPS – Holybro M8N/M9N GPS, H-RTK M8P/F9P Rover Lite & Helical
  • Battery – 4S 2000-5000mAh Lipo
  • Motors – 2216 920Kv Motors
  • ESC – 20A BLheli
  • Propellers – 1045

Flight time:  ~18 minutes hover with no additional payload. Tested with 5000mAh Battery & Holybro 2216 920 KV motors.

 

Weight 550 g
Dimensions 25 × 25 × 10 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

HolyBro X500 V2 500mm Quadcopter Frame

In stock