Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

HolyBro PM08 Analog Power Module (14S, 200A)

£65.99 (ex VAT £54.99)

Out of stock
Restock in 2+ Weeks

Want to be notified when this product is back in stock?

SKU: H15021 Category: Tags: , Brand:

Meet the PM08 Power Module: the knight in shining aluminum ready to joust away your power woes. With a 200A continuous current rating, it’s the Merlin to your UAV’s Arthur, magically keeping things aloft minus the wizard’s hat!

HolyBro PM08 Analog Power Module (14S, 200A)

£65.99 (ex VAT £54.99)

Out of stock
Restock in 2+ Weeks

Want to be notified when this product is back in stock?

Meet the PM08 Power Module: the knight in shining aluminum ready to joust away your power woes. With a 200A continuous current rating, it’s the Merlin to your UAV’s Arthur, magically keeping things aloft minus the wizard’s hat!

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: H15021 Category: Tags: , Brand:

The PM08 Analog Power Module isn’t just a regular power module; it’s a knight in shining aluminium, here to escort your flight controller through the tempest of high power demands, all while keeping a cool exterior. This gallant module graciously offers a regulated 5.2V to the flight controller from the battery, as well as current consumption and battery voltage measurements via a melodious analog signal through a 6 Pin JST-GH cable to the Autopilot. Quite the courteous companion, isn’t it?

Now, let’s address the elephant in the room or rather, the aluminium in the skies. Encased in a sleek aluminium heat sink case, with a fan that’s ready to battle the fiery dragons (read: heat) that threaten your flight’s realm. The PM08 doesn’t just sit pretty; it actively dissipates the heat generated during operation, ensuring durability and optimal performance. When the going gets tough, the PM08 gets tougher!

Please Note:
– This analog power module is not compatible with Pixhawk 5X/6X. Please use digital power module PM08D that end with a “D” for the 5X/6X series Pixhawk boards. 
– Wire & connector sold separately

Key Features

  • Supports a royal entourage of 2S – 14S Batteries
  • Boasts a robust 200A Continuous Current Rating
  • Easy to set up, because nobody has time for a power struggle
  • The aluminium case is your knight’s shining armor against heat

Specifications

  • Input Voltage: 2S-14S (Quite the voltage virtuoso!)
  • PCB Continuous Current Rating: 200A
  • PCB Burst Current Rating: 1000A (<1 Sec @25C)
  • Max Current Sensing: 237.6A
  • Output: DC 5.1-5.3V & 3A Max
  • Voltage Divider: 18.182
  • Amperes per Volt: 72
  • Dimensions: 1014526mm (Compact yet potent)
  • Mounting hole: 79mm*38.1mm
  • Weight: 151g (A lightweight heavyweight!)

PM08 size

Package Includes

  • 1x PM08 Power Module
  • 1x 40x40mm Fan
  • 1x JST GH 6 Position Connector 15 cm
  • 4x Sets of Screws, Washers, and Nuts

Let the PM08 Analog Power Module take the reins of your flight controller, and ascend into a realm where power meets poise, and every flight is a knightly tale of aerial conquest!

Weight 200 g
Dimensions 5 × 5 × 5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: H15021 Category: Tags: , Brand:

The PM08 Analog Power Module isn’t just a regular power module; it’s a knight in shining aluminium, here to escort your flight controller through the tempest of high power demands, all while keeping a cool exterior. This gallant module graciously offers a regulated 5.2V to the flight controller from the battery, as well as current consumption and battery voltage measurements via a melodious analog signal through a 6 Pin JST-GH cable to the Autopilot. Quite the courteous companion, isn’t it?

Now, let’s address the elephant in the room or rather, the aluminium in the skies. Encased in a sleek aluminium heat sink case, with a fan that’s ready to battle the fiery dragons (read: heat) that threaten your flight’s realm. The PM08 doesn’t just sit pretty; it actively dissipates the heat generated during operation, ensuring durability and optimal performance. When the going gets tough, the PM08 gets tougher!

Please Note:
– This analog power module is not compatible with Pixhawk 5X/6X. Please use digital power module PM08D that end with a “D” for the 5X/6X series Pixhawk boards. 
– Wire & connector sold separately

Key Features

  • Supports a royal entourage of 2S – 14S Batteries
  • Boasts a robust 200A Continuous Current Rating
  • Easy to set up, because nobody has time for a power struggle
  • The aluminium case is your knight’s shining armor against heat

Specifications

  • Input Voltage: 2S-14S (Quite the voltage virtuoso!)
  • PCB Continuous Current Rating: 200A
  • PCB Burst Current Rating: 1000A (<1 Sec @25C)
  • Max Current Sensing: 237.6A
  • Output: DC 5.1-5.3V & 3A Max
  • Voltage Divider: 18.182
  • Amperes per Volt: 72
  • Dimensions: 1014526mm (Compact yet potent)
  • Mounting hole: 79mm*38.1mm
  • Weight: 151g (A lightweight heavyweight!)

PM08 size

Package Includes

  • 1x PM08 Power Module
  • 1x 40x40mm Fan
  • 1x JST GH 6 Position Connector 15 cm
  • 4x Sets of Screws, Washers, and Nuts

Let the PM08 Analog Power Module take the reins of your flight controller, and ascend into a realm where power meets poise, and every flight is a knightly tale of aerial conquest!

Weight 200 g
Dimensions 5 × 5 × 5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

HolyBro PM08 Analog Power Module (14S, 200A)

Out of stock
Restock in 2+ Weeks