Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Hobbywing XRotor Micro Combo Stack (F7 FC + 40A BLHeli_32 ESC)

£129.33 (ex VAT £107.78)

Out of stock
Restock in 2+ Weeks

Want to be notified when this product is back in stock?

SKU: 996-2F6-BD2 Category: Tags: , Brand:

The XRotor Micro Combo from Hobbywing continues to impress with its latest iteration. The Micro Combo features a 40A 4-in-1 ESC along with an updated F7 Flight Controller.

Hobbywing XRotor Micro Combo Stack (F7 FC + 40A BLHeli_32 ESC)

£129.33 (ex VAT £107.78)

Out of stock
Restock in 2+ Weeks

Want to be notified when this product is back in stock?

The XRotor Micro Combo from Hobbywing continues to impress with its latest iteration. The Micro Combo features a 40A 4-in-1 ESC along with an updated F7 Flight Controller.

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: 996-2F6-BD2 Category: Tags: , Brand:

The XRotor Micro Combo from Hobbywing continues to impress with its latest iteration. The Micro Combo features a 40A 4-in-1 ESC along with an updated F7 Flight Controller. This new FC is similar to other versions with its OSD, and voltage monitoring, but the F7 now comes with an all-new 5V & 12V dual BEC Circuit and a special interface for the DJI image transmission system.

Make your electronics stack work for you, not the other way around!

Manual

Hobbywing xrotor micro combo stack f7 fc 40a 4 in 1 blheli 32 esc infographic1 Hobbywing xrotor micro combo stack f7 fc 40a 4 in 1 blheli 32 esc infographic2 Hobbywing xrotor micro combo stack f7 fc 40a 4 in 1 blheli 32 esc infographic3 Hobbywing xrotor micro combo stack f7 fc 40a 4 in 1 blheli 32 esc infographic4

Features

F7 FC

  • Equipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor.
  • Supports BetaFlight, Cleanflight, Butterflight, Inva, and other mainstream FPV firmware.
  • DJI image transmission system port equipped with corresponding flat cable
  • Supports bidirectional DShot digital throttle communication.
  • Unique installation design and shock absorption structure.
  • On-board large capacity Flash memory chip.
  • On-board 5V & 12V dual BEC circuit.
  • On-board Pit Switch module.#

40A 4-in-1 BLHeli_32 ESC

  • All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
  • The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us).
  • Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.
  • High-performance 32-bit microprocessor with a running frequency of up to 48MHz for an excellent performance.
  • BLHeli_32 firmware is the third generation BLHeli.
  • Unique Soft Mounts

Specifications

F7 FC

  • Compatible with (Modes): PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc
  • Compatible with (Transmitters): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
  • Mounting Holes: Convertible 20x20mm / 30.5×30.5mm
  • Programming via: Betaflight/Cleanflight-configurator
  • Firmware: HOBBYWING_XROTORF7CONV
  • Voltage Monitoring: Supported
  • Current Monitoring: Supported
  • FC Programming: Supported
  • External Buzzer: Supported
  • BEC: 5V@1.5: 10V@1.5A
  • LED Control: Supported
  • USB Port: MicroUSB
  • Size: 32x32mm
  • OSD: Built-in
  • Weight: 3.3g

40A 4-in-1 ESC

  • Connectors: (In) XT60 (w/ Wires Soldered on) / (Out) No
  • Input wires: 14AWG-100mm* (Red/Black)
  • Output Wire: No wires but solder tabs
  • Weight / Size: 12.0g / 40x33x5mm
  • ESC Programming: BLHeliSuite32
  • Throttle Calibration: Supported
  • Mounting holes: 30.5×30.5mm
  • LiPo Power input: 3S-6S
  • Burst Current: 60Ax4
  • Cont.Current: 40Ax4
  • BEC Output: No

Included

  • 1x Hobbywing XRotor Micro Combo Stack – F7 FC + 40A 4-in-1 BLHeli_32 ESC
  • 1x Soft Mounting Grommets Set
  • 1x Signal Cable
Weight 50 g
Dimensions 5 × 5 × 2 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: 996-2F6-BD2 Category: Tags: , Brand:

The XRotor Micro Combo from Hobbywing continues to impress with its latest iteration. The Micro Combo features a 40A 4-in-1 ESC along with an updated F7 Flight Controller. This new FC is similar to other versions with its OSD, and voltage monitoring, but the F7 now comes with an all-new 5V & 12V dual BEC Circuit and a special interface for the DJI image transmission system.

Make your electronics stack work for you, not the other way around!

Manual

Hobbywing xrotor micro combo stack f7 fc 40a 4 in 1 blheli 32 esc infographic1 Hobbywing xrotor micro combo stack f7 fc 40a 4 in 1 blheli 32 esc infographic2 Hobbywing xrotor micro combo stack f7 fc 40a 4 in 1 blheli 32 esc infographic3 Hobbywing xrotor micro combo stack f7 fc 40a 4 in 1 blheli 32 esc infographic4

Features

F7 FC

  • Equipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor.
  • Supports BetaFlight, Cleanflight, Butterflight, Inva, and other mainstream FPV firmware.
  • DJI image transmission system port equipped with corresponding flat cable
  • Supports bidirectional DShot digital throttle communication.
  • Unique installation design and shock absorption structure.
  • On-board large capacity Flash memory chip.
  • On-board 5V & 12V dual BEC circuit.
  • On-board Pit Switch module.#

40A 4-in-1 BLHeli_32 ESC

  • All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
  • The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us).
  • Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.
  • High-performance 32-bit microprocessor with a running frequency of up to 48MHz for an excellent performance.
  • BLHeli_32 firmware is the third generation BLHeli.
  • Unique Soft Mounts

Specifications

F7 FC

  • Compatible with (Modes): PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc
  • Compatible with (Transmitters): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
  • Mounting Holes: Convertible 20x20mm / 30.5×30.5mm
  • Programming via: Betaflight/Cleanflight-configurator
  • Firmware: HOBBYWING_XROTORF7CONV
  • Voltage Monitoring: Supported
  • Current Monitoring: Supported
  • FC Programming: Supported
  • External Buzzer: Supported
  • BEC: 5V@1.5: 10V@1.5A
  • LED Control: Supported
  • USB Port: MicroUSB
  • Size: 32x32mm
  • OSD: Built-in
  • Weight: 3.3g

40A 4-in-1 ESC

  • Connectors: (In) XT60 (w/ Wires Soldered on) / (Out) No
  • Input wires: 14AWG-100mm* (Red/Black)
  • Output Wire: No wires but solder tabs
  • Weight / Size: 12.0g / 40x33x5mm
  • ESC Programming: BLHeliSuite32
  • Throttle Calibration: Supported
  • Mounting holes: 30.5×30.5mm
  • LiPo Power input: 3S-6S
  • Burst Current: 60Ax4
  • Cont.Current: 40Ax4
  • BEC Output: No

Included

  • 1x Hobbywing XRotor Micro Combo Stack – F7 FC + 40A 4-in-1 BLHeli_32 ESC
  • 1x Soft Mounting Grommets Set
  • 1x Signal Cable
Weight 50 g
Dimensions 5 × 5 × 2 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Hobbywing XRotor Micro Combo Stack (F7 FC + 40A BLHeli_32 ESC)

Out of stock
Restock in 2+ Weeks