Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

High Voltage APM Power Module with 3A UBEC

(1 customer review)

£14.99 (ex VAT £12.49)

In stock

SKU: 570-4E4-F51 Categories: , Brand:

High Voltage APM Power Module with 3A UBEC

£14.99 (ex VAT £12.49)

In stock

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: 570-4E4-F51 Categories: , Brand:

This is a high voltage APM power module with 3A UBEC. The APM 2.5/2.6 power module is a simple way of providing your APM 2.5/2.6 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 6S LiPo battery. The power module comes completely assembled with XT60 connectors, and wrapped in shrink tubing for protection.

Note: The power module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It is not designed to power servos; please use your aircraft’s own ESC/BEC for that.  This power module includes JST-SH connectors, so if you plan to use with a Pixhawk/PX4 based system you may need to use a different connector.

Specifications:

  • Max input voltage: 28V
  • Max current sensing: 90A
  • Voltage and current measurement configured for 5V ADC
  • Switching regulator outputs 5.3V and 3A max
  • 6-pos DF13 cable plugs directly to APM 2.5/2.6’s ‘PM’ connector
  • Supports 6S battery

APM Power Module Pinout

Apm-3dr-power-module-pinout1. Jpg

Weight 22 g
Dimensions 1 × 8 × 12 cm

1 review for High Voltage APM Power Module with 3A UBEC

  1. Jazz

    Well made works better than the cheaper alternatives. V6 board at time of buying. Bought this to replace a cheap module bought from ebay and well worth the few extra pounds. Thanks

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: 570-4E4-F51 Categories: , Brand:

This is a high voltage APM power module with 3A UBEC. The APM 2.5/2.6 power module is a simple way of providing your APM 2.5/2.6 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 6S LiPo battery. The power module comes completely assembled with XT60 connectors, and wrapped in shrink tubing for protection.

Note: The power module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It is not designed to power servos; please use your aircraft’s own ESC/BEC for that.  This power module includes JST-SH connectors, so if you plan to use with a Pixhawk/PX4 based system you may need to use a different connector.

Specifications:

  • Max input voltage: 28V
  • Max current sensing: 90A
  • Voltage and current measurement configured for 5V ADC
  • Switching regulator outputs 5.3V and 3A max
  • 6-pos DF13 cable plugs directly to APM 2.5/2.6’s ‘PM’ connector
  • Supports 6S battery

APM Power Module Pinout

Apm-3dr-power-module-pinout1. Jpg

Weight 22 g
Dimensions 1 × 8 × 12 cm

1 review for High Voltage APM Power Module with 3A UBEC

  1. Jazz

    Well made works better than the cheaper alternatives. V6 board at time of buying. Bought this to replace a cheap module bought from ebay and well worth the few extra pounds. Thanks

Only logged in customers who have purchased this product may leave a review.

High Voltage APM Power Module with 3A UBEC
High Voltage APM Power Module with 3A UBEC

In stock