Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Hex HERE3+ GNSS Module for Pixhawk (M8P) w/ iStand

£140.00 (ex VAT £116.67)

Backorder:
Restock in 2+ Weeks

SKU: D3A-277-A00 Categories: , Tags: , , , Brand:

The Here3 GPS is a high precision GNSS system, which also supports RTK navigation mode, built with CAN protocol.

Hex HERE3+ GNSS Module for Pixhawk (M8P) w/ iStand

£140.00 (ex VAT £116.67)

Backorder:
Restock in 2+ Weeks

The Here3 GPS is a high precision GNSS system, which also supports RTK navigation mode, built with CAN protocol.

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: D3A-277-A00 Categories: , Tags: , , , Brand:

The Here3 GPS is a high precision GNSS system, which also supports RTK navigation mode, built with CAN protocol. It is also designed to be dust-proof and splash proof. Equipped with STM32F302 processor, the Here3 provides faster processing speed and better reliability.

The Here3 has built-in sensors such as compass, gyroscope, accelerometer, and status LED. It runs on a Chibios real-time operation system. Its open source structure is ideally suited to developers who need specialized requirements on their navigation system.

Key Features

  •  Cost efficient high precision and RTK supported GNSS chip (base station needed for RTK). Positioning accuracy down to centimetre-level in ideal environment.
  • Brand new design with improved visibility on signal LEDs. Better dust proof and water repellent design (No guarentee to be water proof under any situation due to complexity of operation environment).
  • High data rate, upgradeability, noise immunity, and real-time features benefited from CAN protocol
  • Equipped with STM32F302 high-performance processor in real-time operation system.  Framework developed by Hex provides additional stabilities. Supports future firmware updates.
  • Supporting ground control station available. Easy update from Mission Planner.
  • Built-in a complete set of Inertial Measurement Unit (compass, gyroscope, and accelerometer), which satisfy advanced navigation needs.

Here3+%20gnss%20module%20info

Specification

  • Receiver Type – u-blox M8 high precision GNSS modules (M8P)
  • Satellite Constellation – GPS L1C/A, GLONASS L1OF, BeiDou B1I
  • Positioning accuracy – 3D FIX: 2.5 m / RTK: 0.025 m
  • Processor – STM32F302
  • IMU sensor – ICM20948
  • Navigation Update Rate Max: 8Hz
  • Communication Protocol –  CAN
  • Operating Temperature -40℃ to 85℃
  • Dimension –  76mmx76mmx16.6mm
  • Weight –  48.8g
  • Manufacturer Part Number: HX4-06111
Weight 500 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: D3A-277-A00 Categories: , Tags: , , , Brand:

The Here3 GPS is a high precision GNSS system, which also supports RTK navigation mode, built with CAN protocol. It is also designed to be dust-proof and splash proof. Equipped with STM32F302 processor, the Here3 provides faster processing speed and better reliability.

The Here3 has built-in sensors such as compass, gyroscope, accelerometer, and status LED. It runs on a Chibios real-time operation system. Its open source structure is ideally suited to developers who need specialized requirements on their navigation system.

Key Features

  •  Cost efficient high precision and RTK supported GNSS chip (base station needed for RTK). Positioning accuracy down to centimetre-level in ideal environment.
  • Brand new design with improved visibility on signal LEDs. Better dust proof and water repellent design (No guarentee to be water proof under any situation due to complexity of operation environment).
  • High data rate, upgradeability, noise immunity, and real-time features benefited from CAN protocol
  • Equipped with STM32F302 high-performance processor in real-time operation system.  Framework developed by Hex provides additional stabilities. Supports future firmware updates.
  • Supporting ground control station available. Easy update from Mission Planner.
  • Built-in a complete set of Inertial Measurement Unit (compass, gyroscope, and accelerometer), which satisfy advanced navigation needs.

Here3+%20gnss%20module%20info

Specification

  • Receiver Type – u-blox M8 high precision GNSS modules (M8P)
  • Satellite Constellation – GPS L1C/A, GLONASS L1OF, BeiDou B1I
  • Positioning accuracy – 3D FIX: 2.5 m / RTK: 0.025 m
  • Processor – STM32F302
  • IMU sensor – ICM20948
  • Navigation Update Rate Max: 8Hz
  • Communication Protocol –  CAN
  • Operating Temperature -40℃ to 85℃
  • Dimension –  76mmx76mmx16.6mm
  • Weight –  48.8g
  • Manufacturer Part Number: HX4-06111
Weight 500 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Hex HERE3+ GNSS Module for Pixhawk (M8P) w/ iStand

Backorder:
Restock in 2+ Weeks