Not the cheapest?
Let us know, we will try to beat it!
Happymodel X12 ELRS 5in1 AIO Flight Controller
£61.75 (ex VAT £51.46)
Out of stock
Restock in 2+ Weeks
Want to be notified when this product is back in stock?
The ELRS X12 supports ELRS V2.0 and OpenTX paired with Betaflight gives you the best in terms of open-source RX. TX and flight control, all on a single integrated FC.
This is the flight controller used on the Mobula7 1S. We also sell an Frsky version of this FC
Not the cheapest?
We will try to beat it!
⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.
The world first 5-IN-1 AIO flight controller, OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. It comes with onboard SPI ELRS receiver which support ELRS TX module 2.x firmware, and also provide other receiver option like SPI Frsky receiver which support Frsky D8/D16 , REDPINE and SFHSS. This is an amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX range by using this flight controller.
Specification
- Brand Name: Happymodel
- Item Name: X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX
- Betaflight firmware target:
- ELRS Version: CRAZYBEEF4SX1280
- VTX antenna: U.FL
- Weight: 5.1g
- Support 1-2S Lipo/LIHV battery
- Size: 30mm*30mm*8mm
| Flight controller | X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU6000 or ICM20689 or BMI270(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16 Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470 |
| Onboard 4in1 ESC | Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware When use Blujay firmware with 48khz, should set startup power to 1100/1200 |
| Onboard SPI ExpressLRS 2.4GHz Receiver | Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0 |
| Onboard Frsky SPI D8/D16 receiver Version | SPI BUS receiver CC2500 RF Compatible Non EU transmitter D8 model Channels: 8ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support Support Frsky D8/ D16 , Redpine , SFHSS |
| Onboard 5.8g OPENVTX | Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) Antenna connector: U.FL |
Included
- 1 x ELRS X12 ERLS AIO Flight Controller Board
Only logged in customers who have purchased this product may leave a review.
Share this item on:
Product Meta Information:
Reviews
There are no reviews yet.