Happymodel SuperX ELRS V2 5in1 AIO Flight Controller

Introducing the Happymodel SuperX ELRS V2.0 – your not-so-average AIO 5IN1 flight controller that promises to make your drone feel like it just had a double espresso shot. With a brain powered by the STM32F411CEU6 MCU and the ESP32-PICO-D4, this little genius thinks faster than a caffeinated squirrel, boasting a clock speed of 100MHz and a generous 512K of flash memory for all your flight data storage needs.

But wait, there’s more! The SuperX doesn’t just rely on brains alone; it’s also quite the sensory aficionado. Equipped with the BMI270 sensor connected via SPI, it’s like giving your drone a sixth sense, but for flight stability. And with a mount hole size that’s as standard as your morning 25.5mm x 25.5mm toast, it fits snugly into most setups.

Power? Oh, it’s got power. Designed for the humble 1S battery (DC 2.9V-4.35V), this controller is the embodiment of “size doesn’t matter,” with a built-in 5A (each) Blheli_S 4in1 ESC that’s ready to kick some serious air. The Betaflight OSD is built-in too, because who doesn’t love a bit of SPI Control in their life?

Now, let’s talk about broadcasting capabilities. The built-in 5.8G OpenVTX can go from 0mw to “I can scream at 400mw” with just MSP control. Combined with UART ExpressLRS v3.0.0, voltage and current meter sensors, and an antenna that’s basically enameled copper wire (fancy, right?), it’s like having your own personal drone whisperer.

The onboard 4in1 ESC doesn’t just sip power from a 1S LiPo/LiPo HV; it devours it, offering 5A continuous peak and 6A for those “hold my beer” moments. And for the software aficionados, yes, it supports BLHeliSuite programming and comes with the chic Bluejay v0.19.2 firmware.

But here’s the kicker: the onboard Serial ExpressLRS receiver. With packet rate options that sound more like auction bids (50Hz/150Hz/250Hz/500Hz) and ExpressLRS firmware version V3.0, it’s like having a private channel to your drone. And with telemetry output power that’s less than 12dBm, your drone won’t be screaming back at you.

Lastly, the onboard 5.8g VTX is not your grandma’s VTX. With OPENVTX firmware, MSP VTX, and PIT Mode support (because everyone loves a good pit stop), plus 40 channels of transmitting power that range from “whisper mode” to 400mw, your drone is ready to broadcast its aerial adventures like a reality TV star.

And there you have it, folks. The Happymodel SuperX ELRS V2.0: because your drone deserves more than just a flight controller; it deserves a command center.

In the Box:

• 1 x Happymodel SuperX ELRS V2.0 AIO 5IN1 Flight Controller
• A bunch of hope that you’ll actually read the manual

A Closer Look: The Tech Under the Hood

A Word of Warning 🚨

Before you dive in, note that you should possess the soldering skills of a Zen master. Those tiny pads require a steady hand and a focused mind. And just to be crystal clear—any damage due to soldering mishaps is on you, buddy.

Time to Elevate Your Game

This flight controller is like the Swiss Army knife of the FPV world. You get reliability, customization, and performance, all rolled into one. Why settle for less when you can pilot the best?

So, click that “Add to Cart” button now and embrace the future of FPV flying. Trust us, this is the upgrade you didn’t know you needed. But you’ll wonder how you ever flew without it.

FAQs

Q: Can I update the firmware easily? A: Absolutely! The ELRS receiver supports updates via ExpressLRS configurator, WiFi, or Betaflight pass-through.

Q: Is this compatible with my Happymodel EP1 receiver? A: Yes, it’s the same hardware!

Q: What about warranty? A: Check our Warranty Policies page for the nitty-gritty, but remember: soldering issues are not covered.