Features
- The lightest 1s 65mm brushless whoop
- Powerful and efficient
- The lightest 1s AIO 5IN1 F4 flight controller
- New 0702 brushless motors
- VTX power switchable 25mw~200mw
- Low profile Canopy design
Specifications
- Brand Name: Happymodel
- Item Name: Moblite6 1S 65mm ultra light brushless whoop
- Wheelbase: 65mm
- Size: 80mm*80mm*25mm
- Weight: 18.5g (without battery)
- Weight:26g(with Original 1s 300mah Lipo battery )
Motor | Mode: New design 0702 19000 / 26000KV Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm Weight(g): No.of Cells(Lipo):1S only |
Flight controller | (Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR (Flysky SPI RX version)DiamondF4 FS FC Firmware target: CrazybeeF4FS MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Original whoop size compatible Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_50_REV16_8.HEX Default protocol: DSHOT600 |
Onboard Frsky SPI D8 receiver Version | SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 modelChannels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m |
Onboard Flysky SPI receiver Version | SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200~300m Failsafe support |
Onboard 5.8g VTX | Output power: 25mw~200mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels(include Race band)Smartaudio ready |
Runcam Nano3 | Model: RunCam Nano 3 Image Sensor: 1/3″ CMOS Horizontal Resolution: 800TVL Lens : 2.3mm(M6.5) FOV 140° Signal System: PAL/NTSC Non Switchable S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V 120mA@3.3V Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm |
Lipo Battery | Capacity:300mAh Voltage:3.8v Continuous Discharge Rate: 30C Size: 57mmx12mmx7mm Weight: 7.5g Connector: PH2.0 |
Included
- 1x Happymodel Moblite6 65mm Whoop RC FPV Racing Drone
- Option1: 1 x DiamondF4 FR built-in SPI Frsky Receiver
- Option2: 1 x DiamondF4 FS built-in SPI Flysky Receiver
- 4x EX0802 KV19000 Unibell Brushless Motor
- 1x Gemfan 1219 31mm Propeller (4cw+4ccw)
- 1x Runcam Nano 3 FPV Camera
- 1x Built-in 5.8Ghz 40CH 25mw-200mw VTX
- 2x 1S 300mAh Lipo Battery
- 1x Propeller Disassemble Tool
- 1x Screwdriver
- 1x Happymodel Carry Case