Not the cheapest?
Let us know, we will try to beat it!
Happymodel ELRS Fyujon AIO V2 2in1 Module (ELRS + VTX)
£17.95 (ex VAT £14.96)
Out of stock
Restock in 2+ Weeks
Want to be notified when this product is back in stock?
Want a drone experience smoother than a freshly waxed bald eagle? The Happymodel Fyujon V2.0 makes your flight feel as if you’re cruising on airborne silk!
Not the cheapest?
We will try to beat it!
⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.
Ready for Takeoff? Soar High with the Happymodel Fyujon V2.0 2IN1 AIO Module with Built-in ELRS 2.4GHz EP Receiver and OpenVTX
Attention, FPV pilots and drone enthusiasts! Gear up for an adrenaline rush as you conquer the sky with the Happymodel Fyujon V2.0. Your ultimate sidekick for a soaring aerial adventure is here and it’s brimming with exciting features! This is no ordinary module – this is your ticket to the stars!
Awe-Inspiring Features You’ll Love:
- Space Shuttle Toughness: Now equipped with four mounting support structures and all M3 holes that can easily morph into M2 with rubber grommets, this beauty is durable enough to weather any storm.
- Triple Threat Mounting: Offering compatibility with 20mm, 25.5mm, and 30mm mounting for versatility that matches your every need.
- Sleek & Smooth: Reimagined shape to eliminate sharp edges, ensuring a smoother and safer flight experience.
- Dual Antenna Flexibility: Choose between SMD or IPEX antenna, with the default being an SMD ceramic, making it as adaptable as you are.
- Improved Circuitry: Uplift your performance with our enhanced circuitry that gives you a competitive edge every time you fly.
Fly high in the clouds with the perfect amalgamation of a 5.8GHz video transmission and 2.4GHz ELRS receiver. Whether you’re looking to integrate them into a single board or utilise them as separate modules, the Fyujon has got you covered! With open-source solutions that are all the rage in the FPV pilot world, you’ll be in the drone-driving seat with absolute control.
Oh, and did we mention the ultra-lightweight design? Weighing in at just 2.1 grams, it’s perfect for small toothpick quads or the analog version of Cinewhoop. Your next high-speed, high-altitude adventure awaits!
Technical Specifications:
2.4GHz Receiver:
- MCU: ESP8285
- RF Module: SX1280/1281IMLTRT
- Antenna: Onboard SMD ceramic or IPEX1 connector for an external 2.4Ghz antenna
- Frequency Range: 2400 – 2500 MHz
- Maximum Receive Refresh Rate: 500Hz
- Firmware Target: HappyModel EP 2400 RX
5.8GHz VTX:
- Frequency: 5.8G 48CH
- Transmitting Power: 0/RCE/25mw/100mw/300mw
- Power Supply: DC 5V
- SmartAudio Ready
Get set to rule the skies with the Happymodel Fyujon V2.0! We would also like to extend a special thanks to Sushmit Mishra for the design improvements, helping us create the ultimate module for every FPV pilot.
Remember, FPV drone racing isn’t a hobby. It’s a way of life.
Product Tags: FPV Pilots, Drone Enthusiasts, Happymodel Fyujon V2.0, ELRS 2.4GHz EP Receiver, OpenVTX, 5.8GHz Video Transmission, Ultra-lightweight Design, Improved Circuitry
| Weight | 50 g |
|---|---|
| Dimensions | 3 × 3 × 1 cm |
| Frequency |
1 review for Happymodel ELRS Fyujon AIO V2 2in1 Module (ELRS + VTX)
Only logged in customers who have purchased this product may leave a review.
Share this item on:
Product Meta Information:
Bob Hall (verified owner) –
Fitted a couple of these in open frame FPV quads (Skystars Tomahawk and GEPRC Leopard 4″) and both perform well with easily 1km++ range before video gets grainy tho I suspect the ELRS part would go on a bit further. Recommended space saving part for anything with an open top frame and not wanting super long range. One of many Happymodel parts I use that all perform well and generally at a great price point.