Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Happymodel Crazybee F4 V3.1 2-4S 4in1 12A AIO Flight Controller – SPI Frsky

£37.95 (ex VAT £31.63)

Out of stock
Item discontinued

Want to be notified when this product is back in stock?

The Crazybee F4 V3.1 Flight Controller comes pre-soldered with a Frsky SPI receiver and XT30 power wires. This flight controller is the default FC for the TheFPV C2 and Happymodel Cine8 85mm Brushless CineWhoop, but great for other ultra-light micro drones that need space and weight savings.

Happymodel Crazybee F4 V3.1 2-4S 4in1 12A AIO Flight Controller – SPI Frsky

£37.95 (ex VAT £31.63)

Out of stock
Item discontinued

Want to be notified when this product is back in stock?

The Crazybee F4 V3.1 Flight Controller comes pre-soldered with a Frsky SPI receiver and XT30 power wires. This flight controller is the default FC for the TheFPV C2 and Happymodel Cine8 85mm Brushless CineWhoop, but great for other ultra-light micro drones that need space and weight savings.

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

The Crazybee F4 V3.1 Flight Controller comes pre-soldered with a Frsky SPI receiver and XT30 power wires. This flight controller is the default FC for TheFPFlea and the Happymodel Cine8 85mm Brushless CineWhoop, but great for other ultra-light micro drones that need space and weight savings.

Build your micro drone with this AIO flight controller and solve three things at once!

Just add a VTX like the Happymodel Diamond VTX and your stack is good to go!

Features

  • No soldering work needed
  • 5pin VTX wires… simply plug and play, and you are ready to go!
  • XT30 Power Wires
  • Built-In 12A 4-in1 ESC
  • Built-In FrSky SPI Reciever

Specifications

Crazybee F4 V3.1 Flight Controller

  • (Frsky SPI RX version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR
  • (External TBS CRSF NANO version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board Size: 28.5×28.5mm
  • Mounting Pattern: 25.5×25.5mm
  • Power Supply: 2-4S Battery input (DC 7V-17V)
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5V 1A BEC

Onboard 12A 4in1 ESC

  • MCU Upgraded to EFM8BB21
  • Power Supply: 2-4S LiPo/LiPo HV (7v/17v)
  • Con. Current: 12A
  • Burst Current: 15A (5 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: F_H_40_REV16_8.HEX
  • Default protocol: DSHOT600

Onboard Frsky SPI D8 Receiver Version

  • CC2500 Hardware
  • Compatible with FrskyD FrskyX Frsky_X_LBT SFHSS REDPINE protocol
  • Channels: 8ch
  • Failsafe support
  • Diversity 2.4G receiver system
  • No ground interference: above 300meter

Includes

  • 1x Crazybee F4 V3.1 AIO Flight Controller
  • 4x Screws
  • 4x Damping Balls
  • 8x Spacers
  • 1x Pre-Soldered Connecting Wires
  • 1x 2.4 Receiving Antenna

Connection diagram Spi frsky version with external receiver wire

 

Weight 50 g
Dimensions 4 × 4 × 2 cm
Receiver

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

The Crazybee F4 V3.1 Flight Controller comes pre-soldered with a Frsky SPI receiver and XT30 power wires. This flight controller is the default FC for TheFPFlea and the Happymodel Cine8 85mm Brushless CineWhoop, but great for other ultra-light micro drones that need space and weight savings.

Build your micro drone with this AIO flight controller and solve three things at once!

Just add a VTX like the Happymodel Diamond VTX and your stack is good to go!

Features

  • No soldering work needed
  • 5pin VTX wires… simply plug and play, and you are ready to go!
  • XT30 Power Wires
  • Built-In 12A 4-in1 ESC
  • Built-In FrSky SPI Reciever

Specifications

Crazybee F4 V3.1 Flight Controller

  • (Frsky SPI RX version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR
  • (External TBS CRSF NANO version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board Size: 28.5×28.5mm
  • Mounting Pattern: 25.5×25.5mm
  • Power Supply: 2-4S Battery input (DC 7V-17V)
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5V 1A BEC

Onboard 12A 4in1 ESC

  • MCU Upgraded to EFM8BB21
  • Power Supply: 2-4S LiPo/LiPo HV (7v/17v)
  • Con. Current: 12A
  • Burst Current: 15A (5 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: F_H_40_REV16_8.HEX
  • Default protocol: DSHOT600

Onboard Frsky SPI D8 Receiver Version

  • CC2500 Hardware
  • Compatible with FrskyD FrskyX Frsky_X_LBT SFHSS REDPINE protocol
  • Channels: 8ch
  • Failsafe support
  • Diversity 2.4G receiver system
  • No ground interference: above 300meter

Includes

  • 1x Crazybee F4 V3.1 AIO Flight Controller
  • 4x Screws
  • 4x Damping Balls
  • 8x Spacers
  • 1x Pre-Soldered Connecting Wires
  • 1x 2.4 Receiving Antenna

Connection diagram Spi frsky version with external receiver wire

 

Weight 50 g
Dimensions 4 × 4 × 2 cm
Receiver

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Happymodel Crazybee F4 V3.1 2-4S 4in1 12A AIO Flight Controller – SPI Frsky

Out of stock
Item discontinued