GOKU F405 ERVT 1S 5A 5-in-1 400mw ELRS AIO

Next-Gen Powerhouse for Micro FPV Drones (ELRS, 400mW VTX)

Revolutionize your 1S Tiny Whoop or micro FPV drone build with the GOKU F405 ERVT 1S 5A AIO Flight Controller! This groundbreaking 5-in-1 board integrates a powerful Flight Controller (FC), 5A Electronic Speed Controller (ESC), switchable Video Transmitter (VTX), ExpressLRS Receiver (RX), and On-Screen Display (OSD) into a single, lightweight (4g) package.

At its core lies the advanced STM32F405BGA MCU, delivering a massive 68% increase in processing power compared to typical F411 chips found in other micro AIOs. This translates to lightning-fast response times, lower latency, and the ability to run complex filters – essential for competitive FPV racing and smooth freestyle acrobatics.

Designed for ease of use, the GOKU F405 ERVT features modular plug-and-play interfaces for motors, camera, and even an optional external blackbox recorder, minimizing soldering and build time. The onboard 5A BLHeli_S ESCs (supporting Bluejay firmware) provide reliable power for your 1S motors, while the integrated 2.4GHz ELRS 3.0 receiver offers incredible range and penetration.

Experience crystal-clear video with the powerful, onboard analog VTX, switchable from 0mW (Pit Mode) up to 400mW, controlled via IRC Tramp. The integrated pagoda-style antenna is optimized for 1S performance, aiming for excellent range and sub-50ms video latency. Searching for the ultimate 1S F405 AIO, a high-performance Whoop flight controller, or an ELRS AIO with 400mW VTX? The GOKU F405 ERVT is your answer.

Key Features:

• True 5-in-1 Integration: FC, 5A ESC, 400mW VTX, ELRS RX, and OSD on one board.
• Unmatched F405 Processing Power: 68% faster than F411 for lower latency and advanced filtering.
• Plug-and-Play Ready: Solder-free connectors for motors, camera, and optional blackbox.
• Built-in ELRS 2.4GHz Receiver: Flywoo EL24E RX 3.0.0 for long range and reliable link.
• Powerful Switchable VTX: 0mW to 400mW output with IRC Tramp control and integrated antenna.
• Reliable 5A ESCs: Supports 1S LiPo input, 5A continuous current (8A peak), Bluejay compatible.
• Expandable: Supports optional Flywoo plug-and-play 512MB Blackbox module.
• Lightweight & Compact: Only 4g with a standard 25.5×25.5mm mounting pattern.

Specifications:

• MCU: STM32F405BGA
• IMU (Gyro): ICM42688P (4kHz capable)
• Barometer: No
• Black Box: No (Supports external Flywoo module up to 512MB via UART2)
• OSD Chip: AT7456E
• UART Ports: 6 (UART1 VTX, UART2 Blackbox, UART3 ELRS RX, UART4 Free, UART5 SBUS, UART6 Free)
• Supported RX Protocols: CRSF (Internal ELRS), SBUS, iBus, Spektrum
• BEC: 5V @ 2.0A Max
• Onboard Receiver: Flywoo EL24E 2.4GHz RX (Firmware: ExpressLRS V3.0.0)
• FC Firmware Target: FLYWOOF405S_AIO
• Dimensions: 30.5mm x 30.5mm
• Mounting Holes: 25.5mm x 25.5mm (M2)
• Weight: 4g
• Onboard 4-in-1 ESC:
  • Input Power: 1S LiPo Only
  • Continuous Current: 5A per motor
  • Peak Current: 8A per motor
  • ESC Firmware: Bluejay O_H_5_48KHz_V0.19.hex
  • Protocol Support: DShot300, DShot600
  • Motor Connector: JST1.25mm plug
  • Battery Connector: A30 plug
• Onboard Analog VTX:
  • Output Power: Pit (0mW) / 25mW / 50mW / 100mW / 200mW / 400mW
  • Frequency: 5.8GHz (40 Channels, including Raceband)
  • Protocol: IRC Tramp
  • Antenna: Integrated Pagoda-style

What’s in the Box:

• 1x GOKU F405 ERVT 1S 5A 5-in-1 400mW ELRS AIO Board
• 1x A30 Power Cable Pigtail
• 1x JST-0.8 3-Pin Camera Cable (50mm)
• 1x Flywoo Blackbox Connector Cable
• 4x JST 1.25mm 3-Pin Vertical Motor Sockets (for board side)
• 4x M2x6.6mm Shock-Absorbing Rubber Grommets

Disclaimer: Please note: Included accessories such as cable lengths, connector styles, or grommet colors may vary slightly based on manufacturer supply and batch.