Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Frsky S8R 16CH 3-Axis Stabilisation Receiver With Smart Port

£46.99 (ex VAT £39.16)

Out of stock
Item discontinued

Want to be notified when this product is back in stock?

SKU: 47B-0A2-8BA Category: Brand:

Frsky S8R 16CH 3-Axis Stabilisation Receiver With Smart Port

£46.99 (ex VAT £39.16)

Out of stock
Item discontinued

Want to be notified when this product is back in stock?

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: 47B-0A2-8BA Category: Brand:

This is the S8R receiver from FrSky with in-built 3-axis stabilisation. This receiver is designed for fixed wing models and will support stabilisation, automatic leveling, hovering and knife-edge flight modes. For Delta Wings, flying wings and V-tail models, the S8R supports stabilisation and automatic level flight modes. In order to edit the type of model and manipulate these features, you will need to use the S8R.Config or S8R.lua. The S8R can also be used as a standard 8 channel X-series receiver.

Tip: You can use the S8R as a slave receiver with the RB-10 to give you that extra time to bring your model home.

Key Features:

  • Built-in 3-axis stabilisation for fixed wing and gliders
  • Built-in three-axis gyroscope and three-axis accelerometer sensor module
  • Built-in RSSI PWM output (0~3.3V)
  • Built-in battery voltage detection
  • Smart Port enabled

Specifications:

  • S8R (8CH/16CH receiver with built-in 3-axis gyro and 3-axis acceleration)
  • Size: 46.47×26.78×14.12mm (L x W x H)
  • Weight: 14g
  • Number of Channels: 16CH (1-8ch from conventional channel output, 1-16ch from SBUS port)
  • With RSSI PWM output on board: PWM voltage output (0~3.3V), 100HZ, 1500±500us
  • Operating Voltage Range: 4.0~10V
  • Operating Range: full range
  • Gyroscope Measurement Range ±2000dps
  • Accelerometer Measurement Range: ±4g
  • Firmware Upgradeable
  • Compability: Frsky Taranis X9D Plus/X9E/Horus X12S/XJT in D16 mode
  • S8R-EU only works with Frsky Horus X12S and Taranis X9D Plus/X9E/X7/XJT in D16-EU mode.
  • EU version

Resources:

For more information, check out the S8R manual.

Weight 46 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: 47B-0A2-8BA Category: Brand:

This is the S8R receiver from FrSky with in-built 3-axis stabilisation. This receiver is designed for fixed wing models and will support stabilisation, automatic leveling, hovering and knife-edge flight modes. For Delta Wings, flying wings and V-tail models, the S8R supports stabilisation and automatic level flight modes. In order to edit the type of model and manipulate these features, you will need to use the S8R.Config or S8R.lua. The S8R can also be used as a standard 8 channel X-series receiver.

Tip: You can use the S8R as a slave receiver with the RB-10 to give you that extra time to bring your model home.

Key Features:

  • Built-in 3-axis stabilisation for fixed wing and gliders
  • Built-in three-axis gyroscope and three-axis accelerometer sensor module
  • Built-in RSSI PWM output (0~3.3V)
  • Built-in battery voltage detection
  • Smart Port enabled

Specifications:

  • S8R (8CH/16CH receiver with built-in 3-axis gyro and 3-axis acceleration)
  • Size: 46.47×26.78×14.12mm (L x W x H)
  • Weight: 14g
  • Number of Channels: 16CH (1-8ch from conventional channel output, 1-16ch from SBUS port)
  • With RSSI PWM output on board: PWM voltage output (0~3.3V), 100HZ, 1500±500us
  • Operating Voltage Range: 4.0~10V
  • Operating Range: full range
  • Gyroscope Measurement Range ±2000dps
  • Accelerometer Measurement Range: ±4g
  • Firmware Upgradeable
  • Compability: Frsky Taranis X9D Plus/X9E/Horus X12S/XJT in D16 mode
  • S8R-EU only works with Frsky Horus X12S and Taranis X9D Plus/X9E/X7/XJT in D16-EU mode.
  • EU version

Resources:

For more information, check out the S8R manual.

Weight 46 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Frsky S8R 16CH 3-Axis Stabilisation Receiver With Smart Port
Frsky S8R 16CH 3-Axis Stabilisation Receiver With Smart Port

Out of stock
Item discontinued