Flywoo GOKU GM10 Pro V3 GPS w/compass

Meet the GOKU GM10 V3 GPS, the latest marvel from FLYWOO featuring the cutting-edge M10050 GNSS chip. This version trumps its predecessor, the GM8 V2, with pinpoint accuracy and lightning-fast satellite acquisition.

Note: The chip of GOKU GM10 V3 GPS is M1005. Only BF4.3x version firmware can use Ublox protocol.

BETAFLIGHT：Use firmware above 4.3.0
INAV：Use the latest 6.0.0 configurator, the latest firmware above 5.0.0

Specifications

• Brand: FLYWOO
• Model: GM10 PRO V3 GPS w/ Compass
• Dimensions: 25mm x 25mm x 6mm
• Weight: 7.3g
• Connector: 1.00mm spacing between the 6-pin patch seat

Key Features

• Advanced GPS Module with Tri-module Compass
• Integrated electronic compass IC QMC5883L
• 1.0mm spacing between the 6-pin patch seat

Electrical Characteristics

• Chipset: M10050 (Tenth Generation Chip)
• Receiving Format: GPS, GLONASS, Galileo, BeiDou, QZSS, and SBAS
• Default Protocol: GPS, Galileo, BeiDou
• Frequency: GPS L1, GLONASS L1, BeiDou B1, SBAS L1, Galileo E1
• Channels: 72 Searching Channels

Sensitivity

• Tracking: -162dBm
• Reacquisition: -160dBm

Data and Update Rate

• Support Rate: 4800bps to 921600bps, Default 115200bps
• Data Level: TTL or RS-232, Default TTL level
• Data Protocol: BF4.3.X (UBLOX) / BF4.2.X (NMEA)
• Output Frequency: 1Hz-10Hz, Default 10Hz

Operational Limits

• Altitude: 50,000m Max
• Velocity: 500m/s Max
• Acceleration: Less than 4g

Power Consumption

• VCC: DC Voltage: 5V
• Operating Temp: -40°C to +85°C
• Storage Temp: -40°C to +105°C

Indicator

• PPS LED: Yellow (not bright when GPS not fixed, flashing when fixed)
• Module’s Pins: TX, RX, GND, 5V, SCL, SDA

What’s in the Box

• 1x GM10 PRO V3 GPS w/ Compass
• 1x 150mm Cable
• 1x Copper Foil

Note: Accessories may vary based on supply.