Not the cheapest?
Let us know, we will try to beat it!
Fettec FETtec ESC 4in1 65A (3-6S)
£109.95 (ex VAT £91.63)
In stock
Looking for an ESC that’s a match made in heaven for the FetTec G4 flight controller? Look no further than the FETtec 4in1 ESC 65A! This dynamic duo was made to work together like PB&J, or Batman and Robin, or Beyoncé and Jay-Z – you get the picture. With the FETtec 4in1 ESC 65A and FetTec G4 flight controller, you’ll have a setup that’s smoother than a baby’s bottom and more reliable than your mom’s chicken soup recipe.
Not the cheapest?
We will try to beat it!
⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.
Introducing the FETtec 4in1 ESC 65A – the ultimate companion for your quadcopter that won’t let you down. This bad boy is packed with features that’ll make your head spin. Ready to take your drone to the next level? This is the ESC for you.
Key product highlights:
- Active current limiting @ 65A: With the FETtec 4in1 ESC 65A, you don’t have to worry about burning out your ESC. This baby has got active current limiting at 65A, so you can go full throttle without any worries.
- Input voltage: 3S-8S: No need to stress about compatibility issues – this ESC is versatile enough to work with input voltages ranging from 3S to 8S. It’s like the chameleon of ESCs.
- Automatic input signal detection: Don’t you hate it when you have to fiddle around with different input signals? With the FETtec 4in1 ESC 65A, the hassle is over. It automatically detects input signals such as Dshot 300-2400, PWM, OneShot 42/125, Onewire, and S2M.
But wait, there’s more! The FETtec 4in1 ESC 65A also boasts high quality 40V MOSFETs, STM32G071 @ 64MHz, 128 kHz Motor PWM, KISS FC Passthrough, and Betaflight Passthrough. With all these features combined, you can bet that your drone will be running like a dream. Say goodbye to mediocre flights and hello to a whole new world of possibilities with the FETtec 4in1 ESC 65A.
Specifications
- Active current limiting @ 65A
- Input voltage: 3S-8S
- High quality 40V MOSFETs
- STM32G071 @ 64MHz
- 128 kHz Motor PWM
- Automatic input signal detection
- Dshot 300-2400
- PWM
- OneShot 42/125
- Onewire
- S2M
- KISS FC Passthrough
- Betaflight Passthrough
- Maximum outside dimensions 38 x 48mm
- Mounting hole: 30,5 x 30,5mm, M3 expandable for M4
- Weight: 13,6g
Firmware:
- New FETtec Firmware
- FETtec Configurator for updates, configuration and telemetry. Standalone for MacOS, Windows 32 & 64 bit and Chrome Plugin
Included
- 1x FETtec 4in1 ESC 65A
- Capacitor 50V, ESR < 1ohm
- JST-SH 8 pin cable
Recommendation
We generally recommend using the supplied capacitor and a FETtec Spike Absorber
Documentation
| Weight | 100 g |
|---|
Share this item on:
Product Meta Information:
