Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Fettec FC G4-N KISS/Alpha FC Flight Controller

£62.99 (ex VAT £52.49)

In stock

SKU: FET79 Category: Tag: Brand:

The FEttec G4 N Flight Controller is totally out of this world! From high-performance KISS and Alpha FC firmware compatibility to its impressive level of flight control, this bad boy is an ace in its class with performance you can count on. Prepare for a wild ride!

Fettec FC G4-N KISS/Alpha FC Flight Controller

£62.99 (ex VAT £52.49)

In stock

The FEttec G4 N Flight Controller is totally out of this world! From high-performance KISS and Alpha FC firmware compatibility to its impressive level of flight control, this bad boy is an ace in its class with performance you can count on. Prepare for a wild ride!

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: FET79 Category: Tag: Brand:

This is the digital version of the popular Fettec G4, the N stands for No analog OSD.

Works great with the FETtec 4in1ESC.

Manual

Features

  • Latest STM32G4 Processor

    • 180Mhz + Math accelerator
    • Gyro IIM-42652 SPI
  • Supply voltage 6-27V (2S-6S Lipo)

  • 2x dedicated onboard BEC (2A each)

    • 5V BEC for RX
    • 5V/16V BEC for VTX (switchable and real Pit*)
  • Improved IO protection
    • All IOs of the microcontroller e.g. in connectors or solder pads are protected against voltage or current spikes
  • 2x 8 pin connector for solder free ESC connection

    • Connector 1: ESC signal 1-4, telemetry, VCC, GND
    • Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
  • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

    • real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

  • 2x 6 pin connectors for serials

    • RX1, TX1, 3.3V, VCC, 5V, GND
    • RX3, VCS/TX3, RGB LED, VCC, 5V, GND
  • 1x 4 pin connector for receiver

    • Signal, TLM, 5V, GND

  • 5 UART serials

    • UART 1 free
    • UART 2 used for Receiver
    • UART 3 free
    • UART 4 free
    • UART 5 used for ESCs / TLM / Onewire
  • 4 ESC solder pads (Signal/GND) in each corner

  • Buzzer pads

  • 4 tiny RGB LEDs (selectable color)

  • Supported ESC protocols

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • FETtec Alpha FC firmware (KISS FC firmware flashable)
  • Connector type: JST-SH-1mm

Dimensions

  • Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm
  • Mounting hole arrangement:
    • 20 x 20mm with M2 mounting hole (expandable to M3)
    • 30 x 30mm with M3 mounting hole
    • 30 x 30mm mounting hole tips are removable to reduce overall FC size
  • Overall height: 7,9mm
  • Weight: 5,37g

fettec FC G4 size

Firmware

  • FETtec Alpha FC firmware (KISS FC firmware flashable)

Included:

  • 1x FETtec FC G4 – N v1.7

Pinout

FETEC FC G4 pinout 1 FETEC FC G4 pinout esc

Weight 100 g

Share this item on:

Product Meta Information:

SKU: FET79 Category: Tag: Brand:

This is the digital version of the popular Fettec G4, the N stands for No analog OSD.

Works great with the FETtec 4in1ESC.

Manual

Features

  • Latest STM32G4 Processor

    • 180Mhz + Math accelerator
    • Gyro IIM-42652 SPI
  • Supply voltage 6-27V (2S-6S Lipo)

  • 2x dedicated onboard BEC (2A each)

    • 5V BEC for RX
    • 5V/16V BEC for VTX (switchable and real Pit*)
  • Improved IO protection
    • All IOs of the microcontroller e.g. in connectors or solder pads are protected against voltage or current spikes
  • 2x 8 pin connector for solder free ESC connection

    • Connector 1: ESC signal 1-4, telemetry, VCC, GND
    • Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
  • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

    • real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

  • 2x 6 pin connectors for serials

    • RX1, TX1, 3.3V, VCC, 5V, GND
    • RX3, VCS/TX3, RGB LED, VCC, 5V, GND
  • 1x 4 pin connector for receiver

    • Signal, TLM, 5V, GND

  • 5 UART serials

    • UART 1 free
    • UART 2 used for Receiver
    • UART 3 free
    • UART 4 free
    • UART 5 used for ESCs / TLM / Onewire
  • 4 ESC solder pads (Signal/GND) in each corner

  • Buzzer pads

  • 4 tiny RGB LEDs (selectable color)

  • Supported ESC protocols

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • FETtec Alpha FC firmware (KISS FC firmware flashable)
  • Connector type: JST-SH-1mm

Dimensions

  • Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm
  • Mounting hole arrangement:
    • 20 x 20mm with M2 mounting hole (expandable to M3)
    • 30 x 30mm with M3 mounting hole
    • 30 x 30mm mounting hole tips are removable to reduce overall FC size
  • Overall height: 7,9mm
  • Weight: 5,37g

fettec FC G4 size

Firmware

  • FETtec Alpha FC firmware (KISS FC firmware flashable)

Included:

  • 1x FETtec FC G4 – N v1.7

Pinout

FETEC FC G4 pinout 1 FETEC FC G4 pinout esc

Weight 100 g

You may also like…

+
Out of stock

ESC and Motors Accessories

Fettec FETtec ESC 4in1 45A (3-6S)

£73.95 (ex VAT £61.63)
Fettec FC G4-N KISS/Alpha FC Flight Controller

In stock

This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.