Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

F4 Brushed Flight Controller

£17.49 (ex VAT £14.58)

Out of stock
Restock in 2+ Weeks

Want to be notified when this product is back in stock?

SKU: D66-F13-935 Categories: , Brand:

F4 Brushed Flight Controller

£17.49 (ex VAT £14.58)

Out of stock
Restock in 2+ Weeks

Want to be notified when this product is back in stock?

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: D66-F13-935 Categories: , Brand:

This is the F4 brushed flight controller that is based on the Revolution series and supports Raceflight and Betaflight. The F4 brushed is equipped with a F4 processor and uses the 32bit STM32F405 micro controller. This coupled with a 8Khz MPU6000 means that this flight controller will get bored while it is waiting for you to give it stick commands even in the most aggressive of FPV flights. This F4 brushed flight controller supports 1S and 2S power input and SBUS/DSM/DSM2/DSMX receivers. 

Key Features:

  • Supports Raceflight and Betaflight – select Revo as target when flashing
  • MPU6000 IMU
  • Equipped with F4 chip and uses STM32F405 controller
  • Clock speed of 168MHZ, far beyond the 72MHZ of the F3 series controller
  • Supports 1S /2S power input – equipped with a 1S/2S power switch
  • UART1/2/3 ports 5V
  • DSM ports 3.3V
  • With a large current NMOS transistors, operating current of up to 10A or more. Each machine is equipped with freewheeling diodes
  • Supports SBUS/DSM/DSM2/DSMX receivers

Specifications:

  • Dimension: 22mm*32.5mm
  • Thickness: 1.2mm
  • Weight: 4g

Receiver configuration:

1. DSM/DSM2/DSMX receiver can be soldered directly to the DSM/DSM2/DSMX Receiver interface 3.3V, GND, RX3. Enable Seria_RX for UART3 and Set Receiver mode RX_SERIAL. Select Spektrum1024(DSM/DSM2) or Spektrum2048(DSMX) in Raceflight configurator.

2. SBUS receiver can be soldered to the UART1 GND, + 5V, RX1. Then Enable Seria_RX and Set Receiver mode RX_SERIAL. Select Sbus signal in Raceflight configurator.

F4 Brushed Pinout

Sp-f3-brushed-pinout. Png

Weight 10 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: D66-F13-935 Categories: , Brand:

This is the F4 brushed flight controller that is based on the Revolution series and supports Raceflight and Betaflight. The F4 brushed is equipped with a F4 processor and uses the 32bit STM32F405 micro controller. This coupled with a 8Khz MPU6000 means that this flight controller will get bored while it is waiting for you to give it stick commands even in the most aggressive of FPV flights. This F4 brushed flight controller supports 1S and 2S power input and SBUS/DSM/DSM2/DSMX receivers. 

Key Features:

  • Supports Raceflight and Betaflight – select Revo as target when flashing
  • MPU6000 IMU
  • Equipped with F4 chip and uses STM32F405 controller
  • Clock speed of 168MHZ, far beyond the 72MHZ of the F3 series controller
  • Supports 1S /2S power input – equipped with a 1S/2S power switch
  • UART1/2/3 ports 5V
  • DSM ports 3.3V
  • With a large current NMOS transistors, operating current of up to 10A or more. Each machine is equipped with freewheeling diodes
  • Supports SBUS/DSM/DSM2/DSMX receivers

Specifications:

  • Dimension: 22mm*32.5mm
  • Thickness: 1.2mm
  • Weight: 4g

Receiver configuration:

1. DSM/DSM2/DSMX receiver can be soldered directly to the DSM/DSM2/DSMX Receiver interface 3.3V, GND, RX3. Enable Seria_RX for UART3 and Set Receiver mode RX_SERIAL. Select Spektrum1024(DSM/DSM2) or Spektrum2048(DSMX) in Raceflight configurator.

2. SBUS receiver can be soldered to the UART1 GND, + 5V, RX1. Then Enable Seria_RX and Set Receiver mode RX_SERIAL. Select Sbus signal in Raceflight configurator.

F4 Brushed Pinout

Sp-f3-brushed-pinout. Png

Weight 10 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

F4 Brushed Flight Controller
F4 Brushed Flight Controller

Out of stock
Restock in 2+ Weeks