-
×
Meteor65 Frame V2 - Turquoise
1 × £3.95
Not the cheapest?
Let us know, we will try to beat it!
F4 1S 12A AIO Brushless Flight Controller V3
£32.99 – £42.99
The F4 1S 12A AIO Brushless FC V3, designed for HD VTX, is the Chuck Norris of flight controllers. Kicks butt in performance calculations, weighs less than his beard, and even has GPS support. Norris approved! Integrated ELRS RX, 16MB Blackbox, Baro.
Not the cheapest?
We will try to beat it!
⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.
Introducing the Trailblazing F4 1S 12A AIO Brushless FC V3
In the ever-changing drone skies, one controller soars above the rest. Meet the F4 1S 12A AIO Brushless FC V3 – the Captain Kirk of flight controllers and the FIRST designed specifically for HD VTX. And you know what they say about being the first… nothing else compares.
Dazzling Features to Turbocharge Your Flights
- An MCU with Some Serious Muscle: Featuring the STM32F405/AT32F435 chip, this FC takes high-performance calculations and biceps-flexing performance to a stratosphere where only the strongest survive.
- Packed with Tools, Lighter Than a Feather: Weighing just 4.2 grams, our flight controller packs in an ELRS 2.4G receiver, 16MB Black Box, a barometer, and a current meter, without adding the weight of a popcorn kernel to your build.
- External GPS Support: Lost in the great blue yonder? Not with our FC! We’ve added external GPS support through Betaflight 4.4.0 because even seasoned pilots like to know where they’re heading.
- HD VTX Power Supplier: It houses a 5V 3A BEC solution, ensuring your HD VTX never lacks for power, even when your midnight binge-watching sessions do.
Incomparable Specs That’ll Make Your Heart Soar
- MCU: STM32F405RGT6 (168MHz) / AT32F435RGT7 (288MHz)
- Six-Axis: ICM42688P (SPI connection)
- Firmware: Betaflight_4.4.1_BETAFPVF405 (STM32F405) / ATBetaflight_4.3.2_BETAFPVF435_RC3 (AT32F435)
- Receiver: Serial ELRS 2.4G
- Built-in ESC: 12A continuous and peak 25A current
But How Does It Stack Up?
Good question, savvy shopper. The F4 1S 12A AIO Brushless FC V3 is a significant upgrade from its 2022 counterpart, boasting a stronger MCU, built-in black box, and sole support for HD VTX. We’ve upped the ante on performance without adding to the scales – a flying win-win!
There you have it – a flight controller that lets you rule the skies with precision, power, and HD clarity. So why wait? Give your FPV drone the ultimate upgrade with the F4 1S 12A AIO Brushless FC V3 and pilot like a pro!
Specification of FC
- Weight: 4.2g (without power cable and motor connector)
- Six-Axis: ICM42688P (SPI connection)
- MCU: STM32F405RGT6 (168MHz) / AT32F435RGT7 (288MHz)
- Firmware version: Betaflight_4.4.1_BETAFPVF405 (STM32F405) / ATBetaflight_4.3.2_BETAFPVF435_RC3 (AT32F435)
- Receiver: Serial ELRS 2.4G Receiver
- Receiver firmware version: BETAFPV AIO 2400 RX ELRS V2.5.2
- Antenna: Enameled wire
- Blackbox Memory: 16MB
- Sensor: Barometer (BMP280), Voltage&Current
- Mounting Hole Size: 26mm x 26mm (suitable for whoop pattern mounting hole)
- BEC*: 5V 2A@4V supply, 5V 3A@8V supply
- USB Port: SH1.0 4-Pin
- Built-in ESC with 12A continuous and peak 25A current
- ESC input voltage: 1-2S
- ESC firmware: C_X_70_48_V0.19.2.hex for BB51 Bluejay hardware
- Signal support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Diagram for F4 1S 12A AIO FC V3
Betaflight Firmware and CLI
For STM32F405 Version
For AT32F435 Version
Pay attention, DO NOT flash the other firmware for AT32F435 version. Betaflight official firmware for the AT32F435 is still in the development process, only the currently released ATBetaflight 4.3.2 RC3 has bidirectional Dshot, PRM, and RGB functions.
If you need to use the Betaflight configurator, please use Betaflight_10.10.0 and follow the steps below to open the “Show all serial devices” in the “Options” first to recognize the port.
ESC Firmware
With BB51 ESC solution, F4 1S 12A FC V3 is based on BLHeliSuite16714903 with Bluejay ESC firmware, it supports bidirectional D-shot and RPM filtering in Betaflight, offers 24KHz, 48KHz, and 96KHz fixed PWM frequency for options, and custom start-up melodies. F4 1S 12A FC V3 default factory setting is 48KHz and it doesn’t recommend upgrading the 96KHz, or it might cause an error in the motor idle setting, not spinning when disarmed.
Included
- 1x F4 1S 12A AIO FC V3
- 1x Accesories Kit
| Weight | 50 g |
|---|---|
| Dimensions | 5 × 5 × 1 cm |
| MCU | STM32F405, AT32F435 |
| Receiver |
Only logged in customers who have purchased this product may leave a review.
Share this item on:
Product Meta Information:
Reviews
There are no reviews yet.