This is the super high-speed F1 Wing from SonicModell that has been designed and built specifically for high-speed FPV experience. This airframe is capable of running a 4S power system that provides very strong and smooth thrust and the F1 Wing is built using high-density and solid EPP foam. This means that the entire airframe is super rigid and crash-resistant – useful when travelling at speeds of up to 200Km/h! The F1 Wing also comes with a built-in plastic hinge inside the aileron which provides very quick and accurate reactions to the controls from your radio which is essential when travelling at high speeds. This wing is compact and portable with a detachable main wing and you can install your FPV gear and battery inside the spacious hatch which has the ”NACA” air-cooling system.
On top of all this, the airframe is protected by aerodynamic plastic parts which cover the arms of the digital servo as well as the bottom of the fuselage. This robust Formula 1 Wing will elevate the FPV experience to something you didn’t think was possible! Once you fly F1 fixed wing, you won’t ever go back…
This is the basic Kit version of the F1 Wing, recommended additional equipment is suggested below. If you are looking for the PNP version, check out the link.
- High-density EPP molded wing and fuselage – super hard and rigid, plus pre-built in carbon fiber spar – durable and flexible
- Detachable wing structure, compact size, portable and easy to take outdoor for FPV flying.
- Built-in plastic hinge inside the aileron provides very accurate reactions from the radio control
- Symmetric airfoil driven by 4S power system provide very strong and smooth thrust.
- “No-glue” required assembly, open box and fly in few seconds
- With plastic aerodynamic cover to protect the digital servo arm
- Spacious equipment bay for more FPV gear.
- With plastic cover to protect the fuselage bottom from landing scratch
- With bump for “CG” mark under the main wing.
- With “NACA” Air inlet and outlet for FPV gear cooling
- Brand Name: SONICMODELL
- Item Name: F1 Wing
- Wingspan: 833mm(33″)
- Length: 420mm(16.53″)
- Flying speed: 20km/h – 190+km/h
KIT Version Includes:
The Kit includes all foam parts, plastic parts, hardware, plywood, carbon fiber strip and tube.
- Motor: 2216 2000kv(Shaft Diameter: 5mm)
- ESC: 40A 3-4S(XT60 connector)
- Servo: 2pcs 9g digital servo
- Propeller: 6×4.5 in default
- Battery: 14.8V 1800-2200mAh 30C