Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Eachine Tyro99 DIY Drone/Quadcopter Kit (PNP)

£99.00 (ex VAT £82.50)

Out of stock
Item discontinued

Want to be notified when this product is back in stock?

SKU: TYRO99 Category: Brand:

Eachine Tyro99 DIY Drone/Quadcopter Kit (PNP)

£99.00 (ex VAT £82.50)

Out of stock
Item discontinued

Want to be notified when this product is back in stock?

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: TYRO99 Category: Brand:

Hailed as one of, if not THE best bang-for-your-buck kit out there, the Tyro99 will blow your socks off, and will have you flying sky high without the sky-high price to match!

With this DIY quadcopter kit that is designed to be as cheap as possible while still packing the latest features you expect from a FPV quad-copter.  To start the quad includes a F4 flight controller with integrated OSD, it also packs a 32Khz IMU so you need to make sure the FC is soft mounted when building (soft mounts are included).  You get a beefy 30A 4in1 ESC to provide enough power to the 2206 motors.  We recommend you use a 1300-1800 4S 75C lipo with the tyro to give a good balance between performance and flight time.

Notice: this is the DIY version that comes unassembled.  You will still need a receiver and battery before you can fly this quad.

Specifications

210mm Frame Kit

  • Wheel base: 210mm
  • Frame arm thickness: 5mm
  • Bottom plate thickness: 2mm
  • Side plate thickness: 2mm
  • Frame kit material: 3K carbon fiber & 6065 aluminium 

2206 2150KV Brushless Motor

  • Motor KV: 2150RPM/V 
  • Idle current (Io/10V): 1.26A
  • Lipo cell: 3-5S
  • Weight: 31g
  • Max continuous current: 31A
  • Max continuous power: 496W
  • Max thrust: 1050g (4S/5″)
  • Configu-ration: 12N/14P
  • Motor resistance (RM): 0.0572 Ω 
  • Stator diameter: 22mm
  • Stator thickness: 6mm
  • Motor diameter: 27.7mm
  • Motor body length: 19.2mm
  • Overall shaft length: 34.2mm
  • Prop adapter shaft: M5
  • Bolt holes spacing: 16mm
  • Bolt thread: M3
  • Propeller: 5-6 inch

4 IN 1 30A BLHeli_S ESC

  • Continuous current: 30A
  • Peak Current: 40A(10S)
  • Input voltage: 2-5S
  • BEC: 5V 2A BEC
  • Main control chip: 48Mhz EFM8BB2
  • Firmware: BLHeli_S supports Dshot600
  • MOS: 5*6

Customised F4 Flight Controller

  • Main control chip: STM32F405
  • Sensor: ICM20602 6-axis
  • Power supply: 5V
  • Integrated OSD
  • Onboard LC filter
  • PID cycle rate & gyro refresh rate up to 32Khz
  • BetaFlight racing firmware

700TVL COMS Camera

  • Case size: 25mm*25mm
  • Weight: 9.5g
  • Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP)
  • Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP)
  • Signal system: PAL/NTSC switchable
  • Resolution ratio(horizontal center): 700TVL
  • Video output: 1.0Vp-p/75Ω
  • Automatic gain control: 0.25/0.50/0.75/1.00, up to 55dB
  • White balance: on/off optional 
  • Exposure mode: electron exposure
  • Electronic shutter: 1/50(1/60) – 1/100000 S
  • Gamma correction: 0.45/1.0
  • Synchronization method: inter-sync
  • Camera lens: standard 2.8mm
  • Lens operating voltage: DC12V (wide voltage, measured can work normally at 7.5-13V)
  • Working current: 70mA (low power consumption)
  • Working temperature: -20℃~-60℃
  • Humidity: 0%~98% 

5.8G 40CH 0mW/25mw/200mw/600mw switchable VTX

  • Output power & transmission distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW
  • Transmitting power: 0mW/25mW/200mW/600mW
  • Full video format: NTSC /PAL
  • Input voltage & power dissipation: 7V~24V, +12V/260mA@600mW
  • Size: 20*30*9mm
  • Weight: ≤7g(except antenna)
  • With output power self-check function.
  • Nixie tube SCAN: frequency point (1-8), frequency band (A-E), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw)

Racerstar 5038 2 Blade Propeller

  • Material: PC
  • Mounting hole: 5mm
  • Center thickness: 8mm
  • Quantity: 10 pairs
  • Color: blue, red, yellow, purple, white
  • Weight: 7.25G a pair 
  • Delivery color randomly (10 pairs of propellers are the same color)

Battery Not included
Recommend 3-5S – idealy a 1500 4S 75C Lipo

Kit Contents
1 x 210mm frame kit
2 x 2206 2150KV brushless motor CW
2 x 2206 2150KV brushless motor CCW
1 x 4 IN 1 30A BLHeli_S ESC
1 x Customized F4 flight controller
1 x 700TVL COMS camera
1 x 5.8G 40CH 0mw/25mw/200mw/600mw switchable VTX
2 x Battery strap
10 x Racerstar 5038 2 blade propeller CW
10 x Racerstar 5038 2 blade propeller CCW

Weight 300 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: TYRO99 Category: Brand:

Hailed as one of, if not THE best bang-for-your-buck kit out there, the Tyro99 will blow your socks off, and will have you flying sky high without the sky-high price to match!

With this DIY quadcopter kit that is designed to be as cheap as possible while still packing the latest features you expect from a FPV quad-copter.  To start the quad includes a F4 flight controller with integrated OSD, it also packs a 32Khz IMU so you need to make sure the FC is soft mounted when building (soft mounts are included).  You get a beefy 30A 4in1 ESC to provide enough power to the 2206 motors.  We recommend you use a 1300-1800 4S 75C lipo with the tyro to give a good balance between performance and flight time.

Notice: this is the DIY version that comes unassembled.  You will still need a receiver and battery before you can fly this quad.

Specifications

210mm Frame Kit

  • Wheel base: 210mm
  • Frame arm thickness: 5mm
  • Bottom plate thickness: 2mm
  • Side plate thickness: 2mm
  • Frame kit material: 3K carbon fiber & 6065 aluminium 

2206 2150KV Brushless Motor

  • Motor KV: 2150RPM/V 
  • Idle current (Io/10V): 1.26A
  • Lipo cell: 3-5S
  • Weight: 31g
  • Max continuous current: 31A
  • Max continuous power: 496W
  • Max thrust: 1050g (4S/5″)
  • Configu-ration: 12N/14P
  • Motor resistance (RM): 0.0572 Ω 
  • Stator diameter: 22mm
  • Stator thickness: 6mm
  • Motor diameter: 27.7mm
  • Motor body length: 19.2mm
  • Overall shaft length: 34.2mm
  • Prop adapter shaft: M5
  • Bolt holes spacing: 16mm
  • Bolt thread: M3
  • Propeller: 5-6 inch

4 IN 1 30A BLHeli_S ESC

  • Continuous current: 30A
  • Peak Current: 40A(10S)
  • Input voltage: 2-5S
  • BEC: 5V 2A BEC
  • Main control chip: 48Mhz EFM8BB2
  • Firmware: BLHeli_S supports Dshot600
  • MOS: 5*6

Customised F4 Flight Controller

  • Main control chip: STM32F405
  • Sensor: ICM20602 6-axis
  • Power supply: 5V
  • Integrated OSD
  • Onboard LC filter
  • PID cycle rate & gyro refresh rate up to 32Khz
  • BetaFlight racing firmware

700TVL COMS Camera

  • Case size: 25mm*25mm
  • Weight: 9.5g
  • Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP)
  • Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP)
  • Signal system: PAL/NTSC switchable
  • Resolution ratio(horizontal center): 700TVL
  • Video output: 1.0Vp-p/75Ω
  • Automatic gain control: 0.25/0.50/0.75/1.00, up to 55dB
  • White balance: on/off optional 
  • Exposure mode: electron exposure
  • Electronic shutter: 1/50(1/60) – 1/100000 S
  • Gamma correction: 0.45/1.0
  • Synchronization method: inter-sync
  • Camera lens: standard 2.8mm
  • Lens operating voltage: DC12V (wide voltage, measured can work normally at 7.5-13V)
  • Working current: 70mA (low power consumption)
  • Working temperature: -20℃~-60℃
  • Humidity: 0%~98% 

5.8G 40CH 0mW/25mw/200mw/600mw switchable VTX

  • Output power & transmission distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW
  • Transmitting power: 0mW/25mW/200mW/600mW
  • Full video format: NTSC /PAL
  • Input voltage & power dissipation: 7V~24V, +12V/260mA@600mW
  • Size: 20*30*9mm
  • Weight: ≤7g(except antenna)
  • With output power self-check function.
  • Nixie tube SCAN: frequency point (1-8), frequency band (A-E), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw)

Racerstar 5038 2 Blade Propeller

  • Material: PC
  • Mounting hole: 5mm
  • Center thickness: 8mm
  • Quantity: 10 pairs
  • Color: blue, red, yellow, purple, white
  • Weight: 7.25G a pair 
  • Delivery color randomly (10 pairs of propellers are the same color)

Battery Not included
Recommend 3-5S – idealy a 1500 4S 75C Lipo

Kit Contents
1 x 210mm frame kit
2 x 2206 2150KV brushless motor CW
2 x 2206 2150KV brushless motor CCW
1 x 4 IN 1 30A BLHeli_S ESC
1 x Customized F4 flight controller
1 x 700TVL COMS camera
1 x 5.8G 40CH 0mw/25mw/200mw/600mw switchable VTX
2 x Battery strap
10 x Racerstar 5038 2 blade propeller CW
10 x Racerstar 5038 2 blade propeller CCW

Weight 300 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Eachine Tyro99 DIY Drone/Quadcopter Kit (PNP)
Eachine Tyro99 DIY Drone/Quadcopter Kit (PNP)

Out of stock
Item discontinued