The Hawker Tempest was a British fighter aircraft used by the RAF (Royal Air Force) during the second world war. It was an improved version of its predecessor, the Typhoon, and many consider it to be one of the more powerful fighter aircrafts in the British fleet.
The Tempest’s primary combat role was to carry out reconnaissance missions due to several factors. It had the ability to maintain high speeds at low to medium altitudes along with long range capability thanks to its 45 gallon drop tanks. The Tempest was also armed with four 20mm cannons had a cockpit that allowed great visibility to carry out ground attack during these missions.
Most of the operations were ground attack and they also were able to shoot down many of the V1 rockets fired by the Nazis. The Tempest also scored kills again the German ME262 jets using the ”rat scramble” tactic where they would take advantage of ME262 jets approaching for landing, a vulnerable state, where flaps were down, speeds were slow and incapable of quick acceleration.
Dynam RC has recreated the Hawker Tempest in a beautiful EPO foam construction. The wingspan stretches 50inches while the fuselage stretches 40 inches. The Tempest is equipped with Dynam’s 600kv brushless outrunner motor and a 40amp brushless electronic speed controller providing great power to weight ratio. The control surfaces come alive through the operation of pre-installed 9 gram servos for the aileron, rudder, and elevator. The Tempest is also equipped with retractable servo less landing gear.
- Servoless electric retracts with metal trunnions
- EPO foam construction
- Brushless motor, ESC and servos installed
- Wingspan 1250mm (49.2in)
- Length 1018mm (40in)
- Propeller / EDF 3 blade prop
- Rudder Yes
- Flaps No
- Ailerons Yes
- Lights Yes
- Foam Material EPO Foam
Please Note: This is sold in ARTF format and requires Radio System, 4S Li-Po Battery, Charger and AA batteries.