Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

DJI FPV System Mount for TBS Source One V3

£4.95£8.95

SKU: DJISOM Category: Tags: , , , Brand:

This is a 3D prined TPU mounts for the DJI Air unit and antennas for the TBS source on V3 frame.  This lets you use the digital FPV system with your source one frame in a stylish way.  The Ait unit is mounted in the centre, maintaining the COG.

Remember to add a FPV camera mount if you do not have one already.

Backorder 3D prints usually take 1-2 days to print depending on our printer queue

 

DJI FPV System Mount for TBS Source One V3

£4.95£8.95

This is a 3D prined TPU mounts for the DJI Air unit and antennas for the TBS source on V3 frame.  This lets you use the digital FPV system with your source one frame in a stylish way.  The Ait unit is mounted in the centre, maintaining the COG.

Remember to add a FPV camera mount if you do not have one already.

Backorder 3D prints usually take 1-2 days to print depending on our printer queue

 

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: DJISOM Category: Tags: , , , Brand:

This is a 3D prined TPU mounts for the DJI Air unit and antennas for the TBS source on V3 frame.  This lets you use the digital FPV system with your source one frame in a stylish way.  The Ait unit is mounted in the centre, maintaining the COG.

Cleaned vs Raw

This part takes quite some time to clean up, so if you want to save some money we can sell you this with supports included, just how it comes out of the 3D printer.  Otherwise select the cleaned version where we will remove the support material.   To remove support material carefully put the part into very hot water to warm it up, and remove the support material with some pliers.

Assembly

When assembling, insert antennas first, then connect the antennas to the air unit, then slide prints onto frame and last slide top carbon in from the front. kind of assembles like a puzzle. holes in antenna mounts are for adding zip ties for a little extra security if you want.
(on air unit mount, the front is the short side. see photo) One more thing, you need to use 20mm stack screws for this to work.

Featured preview 267534e7 c2f8 4fc5 acad e4807eedb910 Source one dji3

Desgiend by billyrebellion

 

Weight 100 g
Dimensions 5 × 5 × 5 cm
Colour

Cleaned 3D Print

Raw (with supports), Cleaned (ready to use)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: DJISOM Category: Tags: , , , Brand:

This is a 3D prined TPU mounts for the DJI Air unit and antennas for the TBS source on V3 frame.  This lets you use the digital FPV system with your source one frame in a stylish way.  The Ait unit is mounted in the centre, maintaining the COG.

Cleaned vs Raw

This part takes quite some time to clean up, so if you want to save some money we can sell you this with supports included, just how it comes out of the 3D printer.  Otherwise select the cleaned version where we will remove the support material.   To remove support material carefully put the part into very hot water to warm it up, and remove the support material with some pliers.

Assembly

When assembling, insert antennas first, then connect the antennas to the air unit, then slide prints onto frame and last slide top carbon in from the front. kind of assembles like a puzzle. holes in antenna mounts are for adding zip ties for a little extra security if you want.
(on air unit mount, the front is the short side. see photo) One more thing, you need to use 20mm stack screws for this to work.

Featured preview 267534e7 c2f8 4fc5 acad e4807eedb910 Source one dji3

Desgiend by billyrebellion

 

Weight 100 g
Dimensions 5 × 5 × 5 cm
Colour

Cleaned 3D Print

Raw (with supports), Cleaned (ready to use)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

DJI FPV System Mount for TBS Source One V3
£4.95£8.95 Select options