Frame: Chimera7
- Wheelbase: 320mm
- Main body dimension: 285*199mm
- Bottom to top distance: 20mm
- Arm thickness: 6mm
- Bottom plate thickness: 3mm
- Top plate thickness: 2mm
- Upper(middle) plate thickness: 3mm
- Camera plate thickness: 3mm (included TPU inserts)
Succex-D F7 Stack
SucceX-D F7 V2.1 TwinG
- – MCU: 216MHz STM32F722
- – Gyro:2x ICM20689
- – Baro: YES
- – Blackbox:32MB
- – Betaflight OSD: YES
- – BEC: 5V 2.5A / 9V 2.5A
- – Current sensor scale: 100
- – Inverter for SBUS input (UART2-RX)
- – Smartaudio & Tramp VTX protocol supported
- – Beeper pad : Yes
- – RSSI input pad: No
- – UARTs:5
- – Motor outputs: 8
- – 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
- – 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
- – BLHeli32 Telemetry:RX5
- – Input voltage:recommended 2-6S, MAX 8S
- – Firmware Target: IFLIGHT_F722_TWING
- – Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
- – Dimensions: 36*36mm
- – Weight: 7.5g
- – USB type-C
ESC // SucceX 50A
- – MCU: STM32F051
- – Up tp 48kHz PWM frequency
- – Capacitance: 470uF/50V
- – Current Sensor: Yes
- – Input: 2-6S LIPO
- – Constant: 50A / Burst: 60A
- – BlHeli32 telemetry: Yes
- – BEC: No
- – Supports up to Dshot1200, Proshot, Oneshot, Multishot
- – Target: iFlight-BL32-4IN1
- – Weight: 14.4g
- – Mounting pattern: 30.5*30.5mm/Φ3mm
- – Dimensions: 43*39mm (including the power pads)
Includes
Pre-built and indoor tested Quadcopter
- 1x Chimera7 frame
- 1x GoPro TPU bottom stand incl. lock screw
- 1x DJI FPV camera
- 1x DJI FPV Air Unit Module
- 2x Albatross LHCP RP-SMA 5.8g 150mm antenna
- 2 sets x Gemfan tri-blade 7040 props (Set of 4 – Color may vary)
- 4x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
Reviews
There are no reviews yet.