Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

2.13inch Flexible E-Ink Display HAT for Raspberry Pi

£16.25 (ex VAT £13.54)

In stock

Add your protective case

Case for 2.13inch E-Ink Display

This is a plastic 2.13inch E-Paper Protection Case, For E-Paper Raw Panel

SKU: 7B8-A2F-A3C Category: Tag: Brand:

This is a flexible E-Ink raw display, 2.13inch, 212×104 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

2.13inch Flexible E-Ink Display HAT for Raspberry Pi

£16.25 (ex VAT £13.54)

In stock

Add your protective case

Case for 2.13inch E-Ink Display

This is a plastic 2.13inch E-Paper Protection Case, For E-Paper Raw Panel

This is a flexible E-Ink raw display, 2.13inch, 212×104 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: 7B8-A2F-A3C Category: Tag: Brand:

This is a flexible E-Ink raw display, 2.13inch, 212×104 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Compared with normal e-Paper panels, this flexible panel allows bending without being damaged, and it’s thinner and lighter.

Combined with the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications where curved surface display is required, such as industrial instruments, smart wearable-devices, and so on.

⚠ Frequent continuous refresh will cause irreparable damage to E-Ink. It is recommended that the refresh interval be greater than 180s.

Features

  • Flexible e-Paper, the display section is bendable (DON’T bend the FPC section)
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

  • Operating voltage: 3.3V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 59.2mm × 29.2mm × 0.3mm
  • Display size: 23.71mm × 48.55mm
  • Dot pitch: 0.229 × 0.228
  • Resolution: 212 × 104
  • Display color: black, white
  • Grey level: 2
  • Full refresh time: 2s
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Resources

Included

  • 1x 2.13inch e-Paper display kit

 

 

 

 

 

Weight 55 g
Dimensions 5 × 2 × 1 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: 7B8-A2F-A3C Category: Tag: Brand:

This is a flexible E-Ink raw display, 2.13inch, 212×104 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Compared with normal e-Paper panels, this flexible panel allows bending without being damaged, and it’s thinner and lighter.

Combined with the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications where curved surface display is required, such as industrial instruments, smart wearable-devices, and so on.

⚠ Frequent continuous refresh will cause irreparable damage to E-Ink. It is recommended that the refresh interval be greater than 180s.

Features

  • Flexible e-Paper, the display section is bendable (DON’T bend the FPC section)
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

  • Operating voltage: 3.3V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 59.2mm × 29.2mm × 0.3mm
  • Display size: 23.71mm × 48.55mm
  • Dot pitch: 0.229 × 0.228
  • Resolution: 212 × 104
  • Display color: black, white
  • Grey level: 2
  • Full refresh time: 2s
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Resources

Included

  • 1x 2.13inch e-Paper display kit

 

 

 

 

 

Weight 55 g
Dimensions 5 × 2 × 1 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

2.13inch Flexible E-Ink Display HAT for Raspberry Pi

In stock

Add your protective case

Case for 2.13inch E-Ink Display

This is a plastic 2.13inch E-Paper Protection Case, For E-Paper Raw Panel