Loading... Please wait...

Categories

our newsletter

Account Navigation

  • Gift Certificates
  • Wish Lists
  • My Account
  • Order Status
  • Currency Converter

    Change
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • The MiniCube F3 6DOF Flight Controller
  • The MiniCube 4in1 BLHeli_S BB2 ESC
  • Pinout for DSM2/DSMX receiver
  • Pinout for FrSky receiver
  • Pinout for FlySky receiver

MiniCube F3 Flight Stack

Your Price:
$77.97
SKU:
MIN-FLI-STA
Shipping:
Calculated at checkout

 

Product Description

The MiniCube Flight Stack includes the MiniCube F3 flight controller with integrated OSD, a 4in1 10A BLHeli_S 2-3S BB2 ESC and a MiniCube receiver (choice of FrSky, FlySky and DSM2/DSMX receiver). This is the perfect combination pack for a mini brushless quad build as it includes top quality equipment in a tiny package. The three components measure just 27x27mm and of course, they are stackable making this combo kit the very definition of practicality with no birds nest of wires!

Note: this is the flight stack used on the Aurora 90 Brushless Quadcopter

Key Features:

  • Includes MiniCube F3 flight controller with integrated OSD, a 4in1 10A BLHeli_S 2-3S BB2 ESC and a MiniCube receiver
  • High quality equipment
  • Tiny at just 27x27mm 
  • Stackable to economise on space
  • Choice of three receiver types
  • Comes with all screws and cables needed to connect to each other

minicube-flysky-flytower-5.jpg

Specifications:

MiniCube F3 6DOF Flight Controller with Integrated OSD

  • Size: 27mm*27mm*5mm
  • Mount hole: 20mm*20mm
  • Processor: STM32 F303 MCU
  • Sensor: SPI Sensor MPU6000
  • Built-in Betaflight OSD (Display Battery voltage, RSSI ,Artificial Horizon ,Flight mode ,Flight time, quadcopter name etc.)
  • Firmware version: Betaflight 3.1 Dshot ready
  • Based on Omnibus F3

MiniCube 4in1 10A BLHeli_S 2-3S BB2 ESC

  • Size: 27mm*27mm*5mm
  • Mount hole: 20mm*20mm
  • Firmware version: BLHELI_S 16.5
  • BB2, 48MHZ Chip
  • Lipo Battery: 2-3S
  • Con. Current: 10A
  • Peak Current: 15A (10S)
  • BEC: 5V @0.1A
  • Programming: YES
  • Betaflight passthrough ready
  • Dshot600 ready(Default)
  • Support oneshot42 oneshot125 Multishot Dshot
  • Damped light on

MiniCube FrSky (D8) 8CH Receiver

  • Frequency range: 2.403-2.479Ghz
  • Channels: 8CH 
  • Work mode: D8 Mode
  • Output: SBUS
  • Antenna length: 100mm
  • No ground interference ( Transmitting and receiving 1 m from the ground): >500m
  • Built-in Buzzer (Low voltage alarm) Configure by Betaflight configurator
  • Working current: 80mA
  • Dimensions: 27*27*7mm
  • Weight: 3.5g
  • Compatible with FRSKY ACCST 
  • Compatible with X9D(Plus)DJT/DFT/DHT
  • Telemetry: RSSI, 1S-3S voltage (A1), 1S-3S voltage (A2)

MiniCube FlySky 8CH Receiver

  • Channels: PPM 8CH
  • Model type: Multi-rotor
  • Frequency range: 2.408-2.475GHz
  • 2.4GHz system: AFHDS 2A
  • Work Mode: PPM
  • Transfer method: FHSS
  • Built-in Buzzer (Low voltage alarm) Configure by Betaflight configurator
  • Antenna length: 100mm
  • No ground interference ( Transmitting and receiving 1 m from the ground): >300m
  • Working current: 40mA
  • Size: 27*27*7mm
  • Mount hole:20mm*20mm
  • Weight: 3.1g
  • Compatible Transmitter: Compatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F

MiniCube DSM2/DSMX Receiver

  • Frequency range: 2.403-2.479Ghz
  • Input power: 5V
  • Response time: 22ms / 11MS
  • Resolution: 2048
  • Display method: LED
  • Operating voltage: 3.3V
  • Working current: 60MA
  • Size: 27mm*27mm*7mm
  • Mount hole:20mm*20mm
  • Weight: 3.1 g
  • Antenna length: 100mm 
  • Data format: Serial port
  • Protocol: DSM2/DSMX
  • Distance: no ground interference (1 m from the ground ) > 300m
  • Uses: indoor small aircraft.
  • Compatible Transmitters: DSM2 / DSMX series of remote control
  • Built-in Buzzer (Low voltage alarm) Configure by Betaflight configurator
Back to Top

Click the button below to add the MiniCube F3 Flight Stack to your wish list.