The Fulring32 is the latest generation of ESC from Airbot. The key advantage of the furling series of ESC is that they now use a full F3 MCU onboard. Most other BLheli32 ESC run a Cortex-M0 MCU at 48Mhz. At the moment (August 2018) there is no significant reason to run a F3 MCU, but with the growing popularity of F7 flight controllers along with upcoming features from the BLheli32 developers a faster ESC will be beneficial. So if you want to be on the bleeding edge of the FPV hobby, the furling32 ESC are the ones for you.
- F3 MCU
- Build in Current sensor
- On-Board RGB LED (WS2812B LED)
- 3-6s LIPO input
- 35A continuous current
- 15*30 mm
The ESCs are supplied "Naked", without wires or heat shrink, these must be purchased separately.
- Furling32 ESC