{"product_id":"matek-crsf-pwm-v10-10-channel-crsf-elrs-to-pwm-converter-with-built-in-variometer","title":"Matek CRSF-PWM-V10 10-Channel CRSF\/ELRS to PWM Converter with Built-in Variometer","description":"\u003ch1\u003eMatek CRSF-PWM-V10: Because Your Fixed-Wing Deserves Better\u003c\/h1\u003e\n\u003cp\u003eSo, you’ve finally upgraded to ExpressLRS or Crossfire, but your plane is still living in the stone age with PWM servos? Don't worry, we aren't judging (much). Whether you're building a glider that needs to sniff out thermals or a long-range wing that needs more channels than a premium cable sub, Matek has built this just for you. It’s a converter, it’s a variometer, and it’s probably smarter than your last flight controller.\u003c\/p\u003e\n\n\u003ch3\u003eWhy You Want It\u003c\/h3\u003e\n\u003cp\u003eThe CRSF-PWM-V10 isn't just a bridge; it’s a full-blown upgrade for your RC link. You get 10 PWM outputs—yes, ten—meaning you can finally map every single control surface and maybe a disco ball if you’re feeling fancy. Plus, with the built-in variometer, your transmitter will actually tell you when you’re climbing, instead of you just guessing based on how small the sheep look in your goggles. It's Matek, so it won't spontaneously combust the moment you plug it in. We hope.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol Support:\u003c\/strong\u003e CRSF only (If you're still on PPM, please see a specialist).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Compatibility:\u003c\/strong\u003e 433MHz, 868MHz, 915MHz, 2.4GHz (Basically all of them).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWM Outputs:\u003c\/strong\u003e 10x Channels (For people with too many servos).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWM Frequency:\u003c\/strong\u003e 50Hz to 400Hz (Configurable for those high-speed digital servos you definitely didn't overpay for).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUARTs:\u003c\/strong\u003e 2x for Receiver and GPS (Yes, it talks to satellites).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelemetry:\u003c\/strong\u003e RxBt, Curr, Capa, Bat%, GPS, GSpd, Hdg, Alt, Sats, Vspd, Baro Alt (More data than your fitness tracker).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Sense:\u003c\/strong\u003e 36V Max (1K:10K divider built-in).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 5V LDO:\u003c\/strong\u003e 300mA for GPS and Receiver (Don't try to power a kettle with it).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.8g (Lighter than a single gummy bear).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 38mm x 16mm (Fits in that tiny gap you forgot to leave).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x MATEK CRSF-PWM-V10 Converter\u003c\/li\u003e\n\u003cli\u003eDupont 2.54 pins (Soldering required, keep the fire away from your fingers)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eWorks flawlessly with any CRSF protocol receiver, including TBS Crossfire and ExpressLRS. Requires EdgeTX 2.7.1\/OpenTX 2.3.15 or ExpressLRS 2.5 and above for the full telemetry experience.\u003c\/p\u003e\n\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Precision Variometer:\u003c\/strong\u003e It knows if you're going up or down. Usually.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 PWM Channels:\u003c\/strong\u003e Because 4 is for amateurs and 8 is just not enough.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS Ready:\u003c\/strong\u003e Plug in a GPS and stop getting lost in the clouds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware Upgradeable:\u003c\/strong\u003e Because nobody gets it perfect the first time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCrucial Warning:\u003c\/strong\u003e There is NO built-in regulator for servos. You must power your servos via the BEC pad from an external 5-9V source. If you plug a 4S lipo straight into your servos, you will have a very brief and very expensive fireworks display. \u003c\/p\u003e\n\n\u003ch2\u003eDisclaimer\u003c\/h2\u003e\n\u003cp\u003eUnmanned Tech is not responsible for your lack of soldering skills or the accidental incineration of your vintage balsa glider. Fly responsibly.\u003c\/p\u003e\n\n\u003ch2\u003eStill Here?\u003c\/h2\u003e\n\u003cp\u003eIf you've read this far, you're either a spec-nerd or you're actually going to buy this. Stop over-analysing the PWM frequencies and just add it to your basket. Your long-range ELRS fixed-wing build is crying out for this level of integration. Get it bought, get it soldered, and go find some lift. #Matek #ELRS #Crossfire #FixedWing #FPVUK\u003c\/p\u003e","brand":"Matek","offers":[{"title":"Default Title","offer_id":58198997631357,"sku":"CRSF-PWM-V10","price":11.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/f_0eb2b1ca-3244-4316-b9e1-e337dbfcfc27.png?v=1779448182","url":"https:\/\/www.unmannedtechshop.co.uk\/fr\/products\/matek-crsf-pwm-v10-10-channel-crsf-elrs-to-pwm-converter-with-built-in-variometer","provider":"Unmanned Tech","version":"1.0","type":"link"}