Loading... Please wait...

Categories

our newsletter

Account Navigation

  • Gift Certificates
  • Wish Lists
  • My Account
  • Order Status
  • Currency Converter

    Change
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • This is the optional add-on 3D Printed FPV Camera Mount Pack that you can select with your purchase.

FPV 25 Bundle Pack (FOV 148)

Your Price:
$26.74
SKU:
B77-079-C37
Shipping:
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.

 

Product Description

This is an awesome FPV bundle pack that includes a 700TVL 148° FOV camera, a 25mW 32 Channel transmitter and a corresponding cable pack to connect the two. This is the perfect bundle to install simply onto your mini quad frame with no fuss. No soldering is needed and so you can save time and get flying with FPV gear as quickly as possible! The low power consumption and lightweight nature of this bundle makes it ideal for small aircraft. 

Note: Check out our FPV 25 Bundle Pack (FOV 110) for a kit with a camera with a slightly smaller FOV, or our FPV 200 Bundle Pack (FOV 148) for a pack with a 200mW transmitter. 

We also have as an additional add-on our 3D Printed FPV Camera Mount Pack which is specifically made for the camera included in this kit. This pack includes 6 mounts of varying angle degrees and a worthy add-on to your purchase.

Features: 

  • This package has a 1/3'' CMOS sensor.
  • Comes with a lens cap to keep the lens well-protected.
  • The performance rivals CCD. This is a good quality camera at a low cost. 
  • Performs as well under low-light as normal daytime conditions.
  • The pre-made cable connecting the camera to the transmitter is convenient and easily installed.
  • Extremely suitable for any RC multicopter as it is super lightweight and has a ultra-low power consumption.
  • Compatible with ImmersionRC, Boscam, Foxtech and other generic brand FPV receivers within the same frequency range (please see table below).

Specification of Camera:

  • Item Name : 700tvl 25mW 148 Degree Camera Module With Transmitter 
  • FOV:110°
  • Power Supply: 3.6-5.5V(powered  by image transmission)
  • Current: 60mA@5V
  • Sensor: 1/3” CMOS Over 700TVL
  • Type:PAL / NTSC (free switch)
  • Resolution: 700TVL
  • Operating temperature: -20° C - 70° C
  • Camera Size: 21 X 17X 21mm
  • Lens Size(Length x Diameter): 15.3mm X 14mm
  • Lens: 2.6mm IR coated 
  • Weight: 9.2g


Specification of Transmitter:

  • Modulation Mode: FM
  • Supported Video Format: NTSC/PAL
  • Output  Impedance: 75 Ohm
  • Output Signal Strength: 23~24dBm.
  • Output Power: 25mW
  • Operating Channel: 32CH
  • Operating Voltage: 7V - 24V
  • Operating Current: 100mA
  • Video Band Width:6.5 MHz
  • Antenna Connector: RP-SMA 
  • Size: 38mm x 22.5mm x 6mm
  • Weight: 6g(without antenna)


Package Includes:

  • 1x 700TVL camera
  • 1x 5.8G image transmission 
  • 1x Antenna(2db)
  • 1x 5P Cable
  • 1x Manual

Frequency Table:

eachine-fpv-camera-combo-pack-8.jpg

Find Similar Products by Category

Back to Top

Click the button below to add the FPV 25 Bundle Pack (FOV 148) to your wish list.