{"product_id":"runcam-split-4-v3-camera-80mm-cable","title":"RunCam Split 4 V3 Camera - 80mm Cable","description":"\u003ch1\u003eRunCam Split 4 V3 - 80mm Cable\u003c\/h1\u003e\u003cp\u003eRecord the flight without adding a separate action camera. The Split 4 V3 combines up to 4K30 onboard recording with an analog FPV output, using a small camera module linked to a separate recording board. This is the 80mm cable version, SKU SPLIT4-25V3.\u003c\/p\u003e\u003ch3\u003eKey Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate recording and FPV output:\u003c\/strong\u003e Save MP4 footage while using an analog video system for your live view.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in gyro:\u003c\/strong\u003e Supports Gyroflow for stabilising recorded footage in post-processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact installation:\u003c\/strong\u003e A 14 × 14mm lens module and 29 × 29mm PCB let you position the camera separately from the recording board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy You Want It\u003c\/h3\u003e\u003cp\u003eFor a build where an action camera would take up too much room, this split layout puts the lens at the front while leaving the recording board inside the airframe. Check the board mounting pattern and your cable route before reaching for the soldering iron.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImage Sensor:\u003c\/strong\u003e SONY 13MP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecording Resolution:\u003c\/strong\u003e 4K@30fps; 2.7K@60\/50fps; 1080p@60fps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Frame Rate:\u003c\/strong\u003e 60 fps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOV:\u003c\/strong\u003e 140°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Format:\u003c\/strong\u003e MP4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax microSD:\u003c\/strong\u003e 128GB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Card:\u003c\/strong\u003e Samsung 128GB U3 recommended for higher-rate modes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFile System:\u003c\/strong\u003e exFAT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Type:\u003c\/strong\u003e External power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input:\u003c\/strong\u003e DC 5–20V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e Max 450mA @ 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Interface:\u003c\/strong\u003e UART\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Output:\u003c\/strong\u003e Analog FPV output; NTSC 720×480 \/ PAL 720×576 switchable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Module Size:\u003c\/strong\u003e 14×14mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Distance:\u003c\/strong\u003e 25.5×25.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCB Size:\u003c\/strong\u003e 29×29mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.2g\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the Box*\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × camera assembly\u003c\/li\u003e\n\u003cli\u003e1 × connection cable\u003c\/li\u003e\n\u003cli\u003e1 × set of M2 screws\u003c\/li\u003e\n\u003cli\u003e1 × 14-to-19mm bracket\u003c\/li\u003e\n\u003cli\u003e1 × manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Build\u003c\/h3\u003e\u003cp\u003eThe analog live feed is separate from the higher-resolution onboard recording. Use a suitable regulated supply within 5–20V and check the wiring before powering up. A separate video transmitter and microSD card are required for wireless FPV and recording respectively. Gyroflow stabilisation is applied to recorded footage in post-processing.\u003c\/p\u003e\u003cfigure\u003e\u003cimg alt=\"RunCam Split 4 V3 manufacturer product view\" height=\"1080\" loading=\"lazy\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/isel157039-c529238f04fafe17407d.jpg?v=1794488066\" style=\"max-width:100%;height:auto;\" width=\"1920\"\u003e\u003cfigcaption\u003eRunCam Split 4 V3 camera and recording-board layout; the selected version has an 80mm connection cable.\u003c\/figcaption\u003e\u003c\/figure\u003e","brand":"RunCam","offers":[{"title":"Default Title","offer_id":59098228392317,"sku":"SPLIT4-25V3","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/isel157039-bc7fe17c8115f01f0611.jpg?v=1794488066","url":"https:\/\/www.unmannedtechshop.co.uk\/de\/products\/runcam-split-4-v3-camera-80mm-cable","provider":"Unmanned Tech","version":"1.0","type":"link"}