{"product_id":"iflight-borg-mini-h7-stack-60r-4-in-1-esc","title":"iFlight Borg Mini H7 Stack with 60R 4-in-1 ESC","description":"\u003ch1\u003eiFlight Borg Mini H7 Stack with Borg 60R ESC\u003c\/h1\u003e\n\u003cp\u003eBuilding a compact high-power quad should not mean choosing between processor headroom, receiver integration and an ESC that can handle the battery. The Borg Mini H7 Stack puts an STM32H743 flight controller, onboard 2.4GHz ExpressLRS receiver and 60A Borg 60R 4-in-1 ESC around a 20 × 20mm mounting pattern for 4S to 8S builds.\u003c\/p\u003e\n\u003ch3\u003eKey Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH7 Flight Controller:\u003c\/strong\u003e The STM32H743VIH6 MCU is paired with an ICM42688 gyro, five UARTs and 32MB blackbox flash for a capable Betaflight core.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpressLRS Receiver Onboard:\u003c\/strong\u003e An ESP8285 and SX1281 receiver with external antenna, LNA and TCXO removes one separate receiver board and its wiring from the build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60A 4-in-1 ESC:\u003c\/strong\u003e The Borg 60R supports 4S to 8S LiPo or LiHV power, with 60A continuous output and a 65A ten-second burst rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUseful Power Rails:\u003c\/strong\u003e A 5V 2.5A BEC and switchable 12V 2A BEC give you dedicated supplies for the flight electronics and supported video hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue and Digital Video Support:\u003c\/strong\u003e The FC supports DJI MSP, SmartAudio, IRC Tramp and HDZero interfaces, so the stack is not tied to one video-system camp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC Telemetry and Bidirectional DShot:\u003c\/strong\u003e Motor data and modern DShot workflows are supported without adding another nest of signal wires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Want It\u003c\/h3\u003e\n\u003cp\u003eThis stack is aimed at compact performance builds where board space disappears faster than expected. Integrating the 2.4GHz ELRS receiver clears one item from the layout, while the H7 FC leaves room for GPS, VTX control and other peripherals across five UARTs. Underneath it, the Borg 60R covers a wide 4S to 8S input range and includes an anti-spark filter with high-polymer capacitors for the power stage. Fewer separate boards means fewer opportunities to discover one forgotten wire after the frame is closed.\u003c\/p\u003e\n\u003ch3\u003eFlight Controller Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMCU:\u003c\/strong\u003e STM32H743VIH6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGyro:\u003c\/strong\u003e ICM42688\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOSD:\u003c\/strong\u003e AT7456E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlackbox:\u003c\/strong\u003e 32MB flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUARTs:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor outputs:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBEC outputs:\u003c\/strong\u003e 5V 2.5A and switchable 12V 2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo\/control support:\u003c\/strong\u003e DJI MSP, SmartAudio, IRC Tramp and HDZero\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetaflight target:\u003c\/strong\u003e IFLIGHT_BORG_Mini_H7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 20 × 20mm with 4mm holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36 × 27mm (±1mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFC weight:\u003c\/strong\u003e 7.7g (±1g)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOnboard Receiver\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMCU and RF chip:\u003c\/strong\u003e ESP8285 and SX1281\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol and band:\u003c\/strong\u003e 2.4GHz ExpressLRS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelemetry power:\u003c\/strong\u003e 100mW (20dBm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF features:\u003c\/strong\u003e External antenna, LNA and TCXO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e iFlight2.4GHz_2400_RX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBorg 60R ESC Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 4S to 8S LiPo or LiHV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous current:\u003c\/strong\u003e 60A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBurst current:\u003c\/strong\u003e 65A for 10 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMCU and driver:\u003c\/strong\u003e STM32G071N and FD6288\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e BL32, target IFLIGHT_BLITZ_G3 32.9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocols:\u003c\/strong\u003e DShot150\/300\/600, MultiShot and OneShot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelemetry:\u003c\/strong\u003e Supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent sensor:\u003c\/strong\u003e Not fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 20 × 20mm with 4mm holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 45 × 52mm (±1mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eDoes this stack need a separate radio receiver?\u003c\/h4\u003e\n\u003cp\u003eNot for a compatible 2.4GHz ExpressLRS setup. The Borg Mini H7 includes an onboard ESP8285 and SX1281 receiver with its own external antenna connection.\u003c\/p\u003e\n\u003ch4\u003eCan I use it on 8S?\u003c\/h4\u003e\n\u003cp\u003eThe Borg 60R ESC is specified for 4S to 8S LiPo or LiHV input. Every motor and other power-system component must also be suitable for the battery voltage you choose.\u003c\/p\u003e\n\u003ch4\u003eDoes the ESC include a current sensor?\u003c\/h4\u003e\n\u003cp\u003eNo. iFlight explicitly lists no current sensor on the Borg 60R, so plan telemetry and OSD data accordingly.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the Box*\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Borg Mini H7 flight controller with onboard receiver\u003c\/li\u003e\n\u003cli\u003e1 × Borg 60R 4-in-1 ESC\u003c\/li\u003e\n\u003cli\u003e1 × cable set\u003c\/li\u003e\n\u003cli\u003e5 × silicone grommets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDisclaimer\u003c\/h2\u003e\n\u003cp\u003eCheck motor, battery, capacitor, video-system and firmware compatibility before powering the stack. The 60A rating is not permission to ignore airflow, solder quality or a badly chosen motor and prop combination.\u003c\/p\u003e\n\u003ch2\u003eStill Here?\u003c\/h2\u003e\n\u003cp\u003eIf your compact build needs H7 processing, onboard ELRS and a serious 4-in-1 ESC in one stack, the Borg is ready for the soldering mat.\u003c\/p\u003e","brand":"iFlight RC","offers":[{"title":"Default Title","offer_id":58633476211069,"sku":"B021277","price":109.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/94146.png?v=1788527236","url":"https:\/\/www.unmannedtechshop.co.uk\/de\/products\/iflight-borg-mini-h7-stack-60r-4-in-1-esc","provider":"Unmanned Tech","version":"1.0","type":"link"}