{"product_id":"flyfishrc-m10-ist8310-gps-compass-module","title":"FlyFishRC M10 GPS Module with IST8310 Compass","description":"\u003ch1\u003eFlyFishRC M10 GPS Module with IST8310 Compass\u003c\/h1\u003e\n\u003cp\u003ePosition and heading in one small module, without turning your airframe into a wiring exhibition. The FlyFishRC M10-IST8310 combines a u-blox M10050 GNSS receiver with an IST8310 compass, giving a compatible flight controller satellite-position data and a separate magnetic-heading input.\u003c\/p\u003e\n\u003ch3\u003eKey Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS and compass together:\u003c\/strong\u003e One compact module provides GNSS positioning and an integrated IST8310 magnetometer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-constellation reception:\u003c\/strong\u003e Supports GPS, GLONASS, BeiDou, Galileo, SBAS and QZSS reception. Its documented combined positioning mode uses GPS, BeiDou, Galileo, QZSS and SBAS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10Hz position updates:\u003c\/strong\u003e Supplies regular navigation updates over the UART connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact installation:\u003c\/strong\u003e A 20 × 20 × 11mm module weighing 9g, with an 18 × 18mm RHCP ceramic patch antenna.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate compass connections:\u003c\/strong\u003e GPS uses RX\/TX, while the compass exposes SDA\/SCL connections. Check both interfaces against your controller before reaching for the soldering iron.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Want It\u003c\/h3\u003e\u003cp\u003eFor an FPV, multirotor or fixed-wing build needing both satellite positioning and magnetic heading, this module keeps the two sensors together. It is a component for a compatible navigation system, not an autopilot on its own: the flight controller and its firmware still determine which navigation functions are available.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e FlyFishRC M10-IST8310\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e FF04186\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGNSS chip:\u003c\/strong\u003e u-blox M10050\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass:\u003c\/strong\u003e IST8310\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 3.3–5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS interface:\u003c\/strong\u003e UART, u-blox protocol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS baud rate:\u003c\/strong\u003e 115200bps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass pins:\u003c\/strong\u003e SDA\/SCL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdate rate:\u003c\/strong\u003e 10Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiving channels:\u003c\/strong\u003e 72\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum navigation satellites:\u003c\/strong\u003e Up to 32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal position accuracy:\u003c\/strong\u003e 1.5m 2D in open sky, manufacturer specification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVelocity accuracy:\u003c\/strong\u003e 0.05m\/s, manufacturer specification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e 18 × 18mm RHCP ceramic patch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule dimensions:\u003c\/strong\u003e 20 × 20 × 11mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule weight:\u003c\/strong\u003e 9g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch4\u003eIs this the M10 Mini or QMC5883L version?\u003c\/h4\u003e\u003cp\u003eNo. This is the M10-IST8310 model with an IST8310 compass. Those are separate products, not interchangeable names.\u003c\/p\u003e\n\u003ch4\u003eWill it work with my flight controller?\u003c\/h4\u003e\u003cp\u003eCheck that your controller and installed firmware support the u-blox GNSS interface and IST8310 compass, and provide the required connections and supply voltage. A matching GPS label alone is not enough to establish compatibility.\u003c\/p\u003e\n\u003ch4\u003eDoes this add return-to-home automatically?\u003c\/h4\u003e\u003cp\u003eNo. Navigation and recovery functions depend on your flight controller, supported firmware and correct configuration. Fitment alone does not enable them.\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × FlyFishRC M10-IST8310 GPS module\u003c\/li\u003e\n\u003cli\u003e1 × GPS manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDisclaimer\u003c\/h2\u003e\u003cp\u003eCheck pin assignments and supply voltage before connecting. Keep the compass away from strong magnetic interference and follow your flight controller’s installation and calibration guidance. Navigation assistance is not a substitute for safe operation.\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Default Title","offer_id":59053015400829,"sku":"FELD04186","price":25.7,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/M10-IST8310-GPS-1.png?v=1793990203","url":"https:\/\/www.unmannedtechshop.co.uk\/de\/products\/flyfishrc-m10-ist8310-gps-compass-module","provider":"Unmanned Tech","version":"1.0","type":"link"}