{"title":"Spares","description":"\u003cp\u003eWelcome. If you're here, something has likely gone wrong. You've performed an unscheduled landing, conducted a successful gravity test, or perhaps introduced the wrong voltage to the wrong component and been blessed with a puff of magic smoke.\u003c\/p\u003e\n\u003cp\u003eDon't worry. You're not a bad pilot (or maker); you're just a good product tester. This isn't a graveyard; it's the hardware hospital. This is where good tech comes to get a second chance.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eDon't Replace. Repair.\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eIn a world of disposable everything, we believe in the sacred right to repair your own gear. Why bin a £500 drone for a single broken arm? Why toss a perfectly good flight controller because you ripped off a USB port?\u003c\/p\u003e\n\u003cp\u003eFixing your stuff is cheaper, smarter, and gives you a level of satisfaction that buying something new never can. It’s a middle finger to planned obsolescence. We stock the bits and pieces you need to turn your \"walk of shame\" into a victory lap.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFrom Snapped Arms to Fried Boards\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eThis is the island of misfit parts, ready to bring your gear back to life.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFor the Flyers:\u003c\/b\u003e This is where you'll find the common casualties of FPV. We're talking fresh carbon fibre arms, replacement motor bells, new antennas, camera housings, and all the other components that exist in a constant battle with trees, concrete, and gate posts.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFor the Makers:\u003c\/b\u003e For every brilliant project, there's a moment of catastrophic error. Find replacement ports, cables, and components to fix that dev board you accidentally shorted or that sensor you physically crushed. It happens.\u003c\/p\u003e\n\u003cp\u003eSo take a breath. Find the exact part you need. And get back to building, flying, and finding new and inventive ways to break things. We'll be here for you when you do. It's a solid business model.\u003c\/p\u003e","products":[{"product_id":"9mm-rod-vibration-isolated-load-pipe-mount-1","title":"9mm Rod Vibration Isolated Load Pipe Mount","description":"\u003cp\u003eThis is a spare X650\/X800 loading pipe mount that is used to mount a gimbal or other equipment onto your multi-rotor.\u003c\/p\u003e\n\u003cp\u003eThis mount is made from an aluminium outer ring, with a rubber insert that is used to dampen vibrations.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHole size: M2.5\u003c\/li\u003e\n\u003cli\u003eInner diameter: 9mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":56578048557437,"sku":"UT-Q650-load-pipe-mount","price":2.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-q650-load-pipe-mount2__32090.1417027642.1280.1280.jpg?v=1770216512"},{"product_id":"q800-replacement-fuselage-strut-type-2","title":"Q800 Replacement Fuselage Strut (Type 1)","description":"\u003cp\u003e\n This is a replacement fuselage strut (type 1) for your Q800 Hexacopter Frame\n\u003c\/p\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":56578094956925,"sku":"Q800-Strut-Type1","price":3.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-q800-strut-type1__21533.1417028269.1280.1280.jpg?v=1753829514"},{"product_id":"crazyflie-propeller-47-17-4ccw-4cw-black","title":"Crazyflie Propeller 47-17 (4CCW+4CW) (black)","description":"\u003cdiv\u003e\n \u003cdiv\u003e\n  With a new and improved design these propellers gives the Crazyflie a boost in efficiency. Both flight time and maximum thrust is increased with up to 15%!\n \u003c\/div\u003e\n \u003cdiv\u003e\n  \u003cstrong\u003e\n   Note:\n  \u003c\/strong\u003e\n  This propeller is not the stock propeller delivered with the Crazyflie 2.1\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003cstrong\u003e\n  Specifications\n \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Diameter: 47 mm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Pitch: 17 mm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   \u003cdiv\u003e\n    \u003cdiv\u003e\n     Material: PC\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Fits shaft: 0.8 mm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Weight: 0.3 g\n  \u003c\/li\u003e\n  \u003cli\u003e\n   \u003cdiv\u003e\n    \u003cdiv\u003e\n     \u003cdiv\u003e\n      Number of blades: 2\n     \u003c\/div\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003cstrong\u003e\n  Package content\n \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   4 x CW propeller\n  \u003c\/li\u003e\n  \u003cli\u003e\n   4 x CCW propeller\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578119369085,"sku":"800000010","price":4.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/newprops4x4-1024px_1024x1024_815f3cb6-7313-47f6-96c5-11fd47a01c32.webp?v=1753829821"},{"product_id":"crazyflie-z-ranger-deck","title":"CrazyFlie Z-Ranger Deck","description":"\u003cp\u003eThe Z-ranger deck uses a laser sensor to measure the distance to the ground and adds the possibility to fly with precise height control. Using the ToF sensor VL53L0x the Crazyflie 2.0 can measure the distance from the sensor to a ground object at up two 2 meters.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003eFast, accurate distance ranging\u003c\/li\u003e\n\u003cli\u003eMeasures absolute range up to 2 meters\u003c\/li\u003e\n\u003cli\u003eEye safe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003eVL53L0x ToF sensor to measure distance up to 2 meters within a few millimeters.\u003c\/li\u003e\n\u003cli\u003e1-wire memory for automatic expansion deck detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Mechanical specifications \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003eWeight: 1.6g\u003c\/li\u003e\n\u003cli\u003eSize (WxHxD): 21x28x4mm\u003c\/li\u003e\n\u003cli\u003eDesigned for mounting under the Crazyflie 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Compatibility \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003eWorks with the Crazyflie 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePack Includes:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Z-ranger deck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/start\/\"\u003e Start here \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/crazyflie-2-0-buyers-guide\/\"\u003e Buyer guide \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/development-overview\/\"\u003e Development \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/frequently-asked-questions-Crazyflie-2.0\/\"\u003e FAQ \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bitcraze.io\/getting-help\/\"\u003e Getting help \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.bitcraze.io\/projects:crazyflie2:expansionboards:zranger\"\u003e Wiki \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578176057725,"sku":"114991072","price":17.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CrazyFlieZ-RangerDeck2.jpg?v=1770211595"},{"product_id":"travel-limitation-screws-set-for-tbs-tango-2","title":"Travel Limitation Screws Set for TBS Tango 2","description":"\u003cp\u003e\n Screws set for the Tango 2 including the m1.6x6 screws for vertical travel limiting.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Works with both Tango2 and Tango2 Pro gimbals.\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  4 x M1.6*5 Pan\/Washer Head Screws (For Travel Limiting)\n \u003c\/li\u003e\n \u003cli\u003e\n  8 x M2x6 Socket Head Screws\n \u003c\/li\u003e\n \u003cli\u003e\n  8 x M2x5 Sockey Head Screws\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x M1.6 Allen Key\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":56578176418173,"sku":"740-A07-364","price":2.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Screws-set-for-the-Tango-2.jpg?v=1753830729"},{"product_id":"shendrones-3d-printed-frame-parts-for-terraplane","title":"Shendrones 3D Printed Frame Parts for Terraplane","description":"\u003cp class=\"font_8\"\u003e\n This is a set of 3D printed parts for the Shendrones Terraplane quadcopter.\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  includes fpv cam mount, camera mount and DJI Antenna Mounts.  Full list of 3D print files are\n  \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4898124\"\u003e\n   available here\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x FPV Camera Mount\n \u003c\/li\u003e\n \u003cli\u003e\n  1x GoPro Camera Mount Base\n \u003c\/li\u003e\n \u003cli\u003e\n  2x DJI FPV Antenna Mount\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ShenDrones","offers":[{"title":"Default Title","offer_id":56578176680317,"sku":"B45-CE1-6A8","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/shendrones-terraplane-3d-print2.png?v=1753830735"},{"product_id":"crazyflie-2-0-bigquad-deck","title":"CrazyFlie 2.0 - BigQuad Deck","description":"\u003cp\u003eWith the BigQuad deck you can transform your Crazyflie 2.0 to a bigger quad by connecting external ESCs (Electronic Speed Controller) to the breakout connectors on the deck. The autodetection of the deck makes this transformation possible to do in seconds. The deck contains breakout header connectors for additional accessories such as external receiver (CPPM input) and GPS. It also has the possibility to monitor battery voltage and current.\u003c\/p\u003e\n\u003cp\u003eThis product is intended to be used together with the \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/crazyflie-2-0\/\"\u003e Crazyflie 2.0 \u003c\/a\u003e quadcopter and uses its expansion board system. Please have a look at the \u003ca rel=\"nofollow noopener noreferrer\" href=\"http:\/\/www.bitcraze.se\/crazyflie-2-0-buyers-guide\/\" target=\"_blank\"\u003e buyers guide \u003c\/a\u003e for more info about the Crazyflie 2.0 ecosystem. For more information about how to use the expansion decks check out the \u003ca rel=\"nofollow noopener noreferrer\" href=\"https:\/\/www.bitcraze.io\/getting-started-with-expansion-decks\/\" target=\"_blank\"\u003e getting started with expansion decks \u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 x ESC connectors\u003c\/li\u003e\n\u003cli\u003e0.1\"header mounting holes for additional connectivity:\n\u003cul\u003e\n\u003cli\u003eCPPM input (3 pin)\u003c\/li\u003e\n\u003cli\u003eGPS input (4 pin)\u003c\/li\u003e\n\u003cli\u003eI2C expansion (4 pin)\u003c\/li\u003e\n\u003cli\u003eBattery and current monitoring input (3 pin)\u003c\/li\u003e\n\u003cli\u003eBuzzer output (2 pin)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnect one or two additional decks\u003c\/li\u003e\n\u003cli\u003eAutomatic detection of expansion deck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eElectrical Specification:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower Crazyflie 2.0 with 4.5V - 5.5V from ESC.\u003c\/li\u003e\n\u003cli\u003eBiqQuad deck inputs are 5V tolerant.\u003c\/li\u003e\n\u003cli\u003eBattery voltage monitoring divider scaled for input up to 23V.\u003c\/li\u003e\n\u003cli\u003eCurrent monitoring input 0V - 3V.\u003c\/li\u003e\n\u003cli\u003eBiqQuad deck and Crazyflie 2.0 current consumption:\n\u003cul\u003e\n\u003cli\u003e~120mA without any additional decks.\u003c\/li\u003e\n\u003cli\u003eUp to 500mA if Crazyflie 2.0 battery is connected and charging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e1-wire memory for automatic expansion deck detection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMechanical Specification:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 3.8g\u003c\/li\u003e\n\u003cli\u003eSize (WxHxD): 36x40x5mm\u003c\/li\u003e\n\u003cli\u003eM3 mounting holes placed 30.5mm square.\u003c\/li\u003e\n\u003cli\u003eDesigned for mounting above or under the Crazyflie 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePack Includes:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x BigQuad deck\u003c\/li\u003e\n\u003cli\u003e4x M2x4 nylon screw\u003c\/li\u003e\n\u003cli\u003e2x M2x6 hex spacer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noopener noreferrer\" href=\"http:\/\/www.bitcraze.se\/\" target=\"_blank\"\u003e Bitcraze \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noopener noreferrer\" href=\"http:\/\/wiki.bitcraze.se\/\" target=\"_blank\"\u003e Wiki \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noopener noreferrer\" href=\"http:\/\/forum.bitcraze.se\/\" target=\"_blank\"\u003e Forum \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noopener noreferrer\" href=\"http:\/\/www.bitcraze.se\/crazyflie-2-0-buyers-guide\/\" target=\"_blank\"\u003e Buyers guide \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noopener noreferrer\" href=\"https:\/\/www.bitcraze.io\/getting-started-with-expansion-decks\/\" target=\"_blank\"\u003e Getting started with expansion decks \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Support \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have any further question for technical support, please contact support@bitcraze.se.\u003c\/p\u003e","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578176713085,"sku":"102990227","price":11.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CrazyFlie2.0-BigQuadDeck1.jpg?v=1770213540"},{"product_id":"crazyflie-micro-sd-card-deck","title":"Crazyflie Micro SD Card Deck","description":"\u003cp\u003e\n \u003cspan\u003e\n  Add the possibility to read and write files to a SD card. As an example it could be used for high speed logging.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Features:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Automatic detection of deck via 1-wire memory\n \u003c\/li\u003e\n \u003cli\u003e\n  Designed for mounting above or under the Crazyflie 2.0\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Weight: 1.7g\n \u003c\/li\u003e\n \u003cli\u003e\n  Size (WxHxD): 21x28x4mm\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Pack Includes:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1 x SD-card deck\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578177433981,"sku":"114990852","price":10.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-crazyflie_micro_sd_card_deck-3__42608.1498813116.1280.1280.jpg?v=1753830748"},{"product_id":"s500-s550-arm","title":"S500\/S550 Arm","description":"\u003cp\u003e\n This is one spare arm for the S500 quadcopter and the S550 hexacopter frame in case of loss or damage. There are 4 colours to choose from; black, white, red or blue. The design of these S500\/S550 arms ensures durability and reliability. They are made with a carbon fibre rod that is enclosed by the plastic surrounding that you see to ensure an excellent rigidity to your S500\/S550 arm.\n\u003c\/p\u003e\n\u003ch3\u003e\n Specifications:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Material: ABS\n \u003c\/li\u003e\n \u003cli\u003e\n  Motor mounting hole spacing: 16 \/ 25mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 43g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Black","offer_id":56578183823741,"sku":"C83-424-AA1","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56578183856509,"sku":"544-C99-A25","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56578183889277,"sku":"C0F-4A5-3E9","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56578183922045,"sku":"CAD-EDF-92C","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-s550_spare_arm__31127.1439559137.1280.1280.jpg?v=1753830770"},{"product_id":"ftx-buzzsaw-small-steering-gear-set","title":"FTX Buzzsaw Small Steering Gear Set","description":"\u003cp\u003e\n This is a set of spare \/ replacement set of steering gears for your FTX Buzzsaw Tracked ATV\n\u003c\/p\u003e\n\u003cp\u003e\n Part Number - FTX0626-2\n\u003c\/p\u003e\n","brand":"FTX","offers":[{"title":"Default Title","offer_id":56578182447485,"sku":"FTX0626-2","price":4.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/FTX0626-2.jpg?v=1753830774"},{"product_id":"spare-arm-for-the-f450-quadcopter","title":"Spare Arm for the F450 Quadcopter","description":"\u003cp\u003e\n This is a spare arm for the F450 quadcopter; needed in case of accident or replacement. It is made out of high-strength polyamide nylon and measures just short of 22cm.\n\u003c\/p\u003e\n\u003cp\u003e\n It has threaded mounting holes making this spare arm easy to attach and it also has an in-built landing post for extra security.\n\u003c\/p\u003e\n\u003cp\u003e\n Choose between red and black.\n\u003c\/p\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Red","offer_id":56578185199997,"sku":"207-381-250","price":3.59,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":56578185232765,"sku":"207-381-251","price":3.49,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-apibjsxyu__31447.1418058335.1280.1280.jpg?v=1753830794"},{"product_id":"crazyflie-debug-adapter-kit","title":"Crazyflie Debug Adapter Kit","description":"\u003cp\u003e\n This is the crazyflie 2.x debug adapter kit. Although the goal of the crazyflie 2.0 was to make it as user friendly as possible there are some physical limitations due to the minute size of the quadcopter.  To make accessing the microcontroller easy we added this debug adapter kit that lets you easily connect it to your crazyflie 2.0 using the standard connectors.  This adapter turns the connector pinouts into a standard JTAG and SWD pinouts.\n\u003c\/p\u003e\n\u003ch3\u003e\n Features:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Includes everything needed to more easily debug the MCUs (STM32F4 and nRF51)\n \u003c\/li\u003e\n \u003cli\u003e\n  Multiple debug pinouts supported (including 20-pin JTAG and 10-pin Cortex debug)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Specification:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Supported debugger pinouts:\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli style=\"list-style-type: none;\"\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Custom pinout that matches ST Discovery board debug interfaces\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Standard Cortex SWV debug 2x6 1.27mm (50mil) SWV interface\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Standard 2x10 2.54mm (100mil) JTAG interface\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Has reset button with jumper for reset support on either STM32F4 and nRF51\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Package contents:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1 x Crazyflie 2.0 debug adapter\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x nRF51 debug connector\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Nylon screw and nut for nRF51 debug connector\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x 6-pin debug cable for connecting to the Crazyflie 2.0\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Support\n\u003c\/h3\u003e\n\u003cp\u003e\n If you have any further question for technical support, please contact\n \u003ca href=\"mailto:support@bitcraze.se\"\u003e\n  support(at)bitcraze.se\n \u003c\/a\u003e\n .\n\u003c\/p\u003e\n","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578185986429,"sku":"114990118","price":21.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/GEP-M10Q_e64347a2-d812-4e93-a49b-c6c2e57e7ffb.jpg?v=1770214235"},{"product_id":"radiomaster-labelled-silicon-switch-cover-set","title":"RadioMaster Labelled Silicon Switch Cover Set","description":"\u003cp\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Radiomaster-Silicone-Switch-Cover.jpg?v=1754235592\"\u003e\n\u003c\/p\u003e\n","brand":"RadioMaster","offers":[{"title":"Black \/ Long","offer_id":56578186641789,"sku":"HP0157.SWTCOV-L-Black","price":5.62,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Short","offer_id":56578186674557,"sku":"HP0157.SWTCOV-S-Black","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Long","offer_id":56578186707325,"sku":"HP0157.SWTCOV-L-Blue","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Short","offer_id":56578186740093,"sku":"HP0157.SWTCOV-S-Blue","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"Orange \/ Long","offer_id":56578186772861,"sku":"HP0157.SWTCOV-L-Orange","price":6.99,"currency_code":"GBP","in_stock":false},{"title":"Orange \/ Short","offer_id":56578186805629,"sku":"HP0157.SWTCOV-S-Orange","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Long","offer_id":56578186838397,"sku":"HP0157.SWTCOV-L-Red","price":6.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ Short","offer_id":56578186871165,"sku":"HP0157.SWTCOV-S-Red","price":4.91,"currency_code":"GBP","in_stock":true},{"title":"White \/ Long","offer_id":56578186903933,"sku":"HP0157.SWTCOV-L-White","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"White \/ Short","offer_id":56578186936701,"sku":"HP0157.SWTCOV-S-White","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Radiomaster-TX16-Switch-Covers.webp?v=1753830814"},{"product_id":"crazyflie-qi-wireless-charging-deck","title":"Crazyflie Qi Wireless Charging Deck","description":"\u003cp\u003eThis is an inductive charging expansion board for your crazyflie 2.0 quadcopter. The inductive charger supports the Qi standard so you can charge your crazyflie 2.0 using the same Qi style charger that you use with many smartphones or tablets, no need to charge the battery via the micro USB port! This inductive charger also supports the WPC V1.1 specification and can supply 5V at 1A to your quadcopter for charging.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 10px 0;\"\u003e\u003ciframe style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\" src=\"https:\/\/www.youtube.com\/embed\/F6_pLpQB-Kw\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with the Qi standard\u003c\/li\u003e\n\u003cli\u003eAutomatic detection of expansion board using 1-wire memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for mounting under the Crazyflie 2.0\u003c\/li\u003e\n\u003cli\u003e1-wire memory for automatic expansion board detection\u003c\/li\u003e\n\u003cli\u003eSupports the Qi wireless charging standard (WPC V1.1)\u003c\/li\u003e\n\u003cli\u003eCan supply up to 1A at 5V\u003c\/li\u003e\n\u003cli\u003eBased on the TI BQ51013B\n\u003cul\u003e\n\u003cli\u003eWeight: 5.0g\u003c\/li\u003e\n\u003cli\u003eSize (WxHxD): 30x30x5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage contents：\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Qi inductive charging expansion board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupport\u003c\/h3\u003e\n\u003cp\u003eIf you have any further question for technical support, please contact \u003ca href=\"mailto:support@bitcraze.se\"\u003e support(at)bitcraze.se \u003c\/a\u003e .\u003c\/p\u003e","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578186609021,"sku":"114990116","price":29.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CrazyflieQiWirelessChargingDeck4.jpg?v=1770214692"},{"product_id":"crazyflie-prototyping-expansion-board","title":"Crazyflie - Prototyping Expansion Board","description":"\u003cp\u003eThe prototype expansion board for the crazyflie 2.0 allows you to build custom electronic components onto your quadcopter and put them into the air. This prototyping board allows you to solder on any components you want and the entire prototyping board connects to the craziflie 2.0 expansion board. This prototyping board has 40 pads that you can mount either through hole, or SMD components onto.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eSoldering pads support both though hole and SMD components \u003cbr\u003eHas SOT-23 footprint for 1-wire memory used for automatic detection (not mounted)\u003c\/p\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMakes all 20 pins in the Crazyflie 2.0 expansion port available\u003c\/li\u003e\n\u003cli\u003e40 pads for prototyping (supporting both though hole and SMD components)\u003c\/li\u003e\n\u003cli\u003eFootprint for optional 1-wire memory (not mounted)\u003c\/li\u003e\n\u003cli\u003eMechanical specification:\n\u003cul\u003e\n\u003cli\u003eWeight: 1.5 g\u003c\/li\u003e\n\u003cli\u003eSize (BxHxW): 28x28x4mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Prototyping expansion board\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578187886973,"sku":"114990115","price":5.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/3_17eeb395-e451-4c2f-8ac6-582c953ebc49.jpg?v=1770216269"},{"product_id":"repalcement-protek25-prop-guard-v2-2pcs","title":"Repalcement ProTek25 Prop Guard v2 (2pcs) (2.5\" drone prop guard)","description":"\u003cul\u003e\n \u003cli\u003e\n  Material: PC\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 24.8g\/pc\n \u003c\/li\u003e\n \u003cli\u003e\n  Color: transparent black, transparent\n \u003c\/li\u003e\n \u003cli\u003e\n  Fit for ProTek25\/HD quads\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cp\u003e\n 2x Prop Guard\n\u003c\/p\u003e\n","brand":"iFlight RC","offers":[{"title":"Black","offer_id":56578188149117,"sku":"B73-057-6BE","price":1.5,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56578188181885,"sku":"A8D-B38-3AC","price":1.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/ProTek25-EVA1-1000x1000-1.jpg?v=1753830838"},{"product_id":"crazyflie-led-ring-deck","title":"Crazyflie LED-ring deck","description":"\u003cp\u003eLight up the dark with custom patterns using the Crazyflie 2.X LED-ring expansion board. Featuring 12 strong RGB LEDs facing downwards, you can create custom patterns in firmware that you control from your Android\/iPhone or computer. Two additional strong front facing LEDs that can be switched on and off, act as headlights.\u003c\/p\u003e\n\u003cp\u003e\u003cimg width=\"800\" title=\"Crazyflie 2.0 LED-ring expansion board\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/led-ring-expansion-board-4.jpg?v=1754232324\" height=\"543\" class=\"__mce_add_custom__\" alt=\"Crazyflie 2.0 LED-ring expansion board\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDC-DC step-up\/down gives stable LED light independent of battery voltage\u003c\/li\u003e\n\u003cli\u003eCreate custom patterns using the Crazyflie 2.0 firmware\u003c\/li\u003e\n\u003cli\u003e12 RGB LED modules facing downwards\u003c\/li\u003e\n\u003cli\u003e2 strong LEDs facing forward\u003c\/li\u003e\n\u003cli\u003eAutomatic detection of expansion board using 1-wire memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDC-DC step-up\/down gives up to 1A at 3.8V from input between 2-5.5V\u003c\/li\u003e\n\u003cli\u003e12 independently addressable RGB LED modules facing downwards ( \u003cw2812b\u003e\n   )\n  \u003c\/w2812b\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 strong white LEDs facing forward\u003c\/li\u003e\n\u003cli\u003e1-wire memory for automatic expansion board detection\u003c\/li\u003e\n\u003cli\u003eDesigned for mounting under the Crazyflie facing downwards\u003c\/li\u003e\n\u003cli\u003eMechanical specification:\n\u003cul\u003e\n\u003cli\u003eWeight: 3.3g\u003c\/li\u003e\n\u003cli\u003eSize (WxHxD): 33x33x5.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x LED-ring expansion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.bitcraze.se\/\"\u003e Bitcraze \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/wiki.bitcraze.se\/\"\u003e Wiki \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/forum.bitcraze.se\/\"\u003e Forum \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.bitcraze.se\/crazyflie-2-0-buyers-guide\/\"\u003e Buyers \u003c\/a\u003e guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Support \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have any further question for technical support, please contact \u003ca href=\"mailto:support@bitcraze.se\"\u003e support(at)bitcraze.se \u003c\/a\u003e .\u003c\/p\u003e","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":56578191065469,"sku":"114990114","price":21.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CrazyflieLED-ringdeck1.jpg?v=1770216429"},{"product_id":"crazyflie-breakout-expansion-board","title":"Crazyflie Breakout expansion board","description":"\u003cp\u003e\n Try the CrazyFlie Breakout Expansion Board from Bitcraze, the ultimate way to test out new hardware without all the fuss of soldering. Just build your circuit on an electronic breadboard, attach the Crazyflie to it, and voila: you're ready for an experiment! And don't forget to check out the buyers guide for more info about the Crazyflie expansion board. So get your test hat on and get clever with the CrazyFlie Breakout\n\u003c\/p\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Features：\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  All expansion connector pins broken out with screen print for easy usage\n \u003c\/li\u003e\n \u003cli\u003e\n  Has SOT-23 footprint for 1-wire memory used for automatic detection (not mounted)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Specifications：\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Makes all 20 pins in the Crazyflie 2.0 expansion port available\n \u003c\/li\u003e\n \u003cli\u003e\n  2.54mm header that fits a breadboard (not included)\n \u003c\/li\u003e\n \u003cli\u003e\n  Screenprint showing all signal names\n \u003c\/li\u003e\n \u003cli\u003e\n  Footprint for optional 1-wire memory (not mounted)\n \u003c\/li\u003e\n \u003cli\u003e\n  Mechanical specification:\n  \u003cul\u003e\n   \u003cli\u003e\n    Weight: 1.5 g\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Size (WxHxD): 27x28x4mm\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Package contents：\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1 x Breakout expansion board\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Resources：\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/www.bitcraze.se\/\"\u003e\n   Bitcraze\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/wiki.bitcraze.se\/\"\u003e\n   Wiki\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/forum.bitcraze.se\/\"\u003e\n   Forum\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Buyers\n  \u003ca href=\"http:\/\/www.bitcraze.se\/crazyflie-2-0-buyers-guide\/\"\u003e\n   Guide\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Support\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n If you have any further question for technical support, please contact\n \u003ca href=\"mailto:support@bitcraze.se\"\u003e\n  support(at)bitcraze.se\n \u003c\/a\u003e\n .\n\u003c\/p\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":56578193359229,"sku":"114990111","price":4.12,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-Crazyflie_Breakout_Expansion_board__49458.1421157988.1280.1280.jpg?v=1753830860"},{"product_id":"crazyflie-battery-holder-deck","title":"Crazyflie Battery holder deck","description":"\u003cp\u003e\n This is the battery holder for the Crazyflie 2.0. Please refer to the\n \u003ca href=\"http:\/\/www.bitcraze.se\/crazyflie-2-0-buyers-guide\/\"\u003e\n  buyers guide\n \u003c\/a\u003e\n for more info about Crazyflie 2.0 expansion boards.\n\u003c\/p\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Specifications：\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Mechanical specification:\n  \u003cul\u003e\n   \u003cli\u003e\n    Weight: 0.4g\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Size (WxHxD): 28x28x4mm\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Resources：\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/www.bitcraze.se\/\"\u003e\n   Bitcraze\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/wiki.bitcraze.se\/\"\u003e\n   Wiki\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/forum.bitcraze.se\/\"\u003e\n   Forum\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Support\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n If you have any further question for technical support, please contact\n \u003ca href=\"mailto:support@bitcraze.se\"\u003e\n  support(at)bitcraze.se\n \u003c\/a\u003e\n .\n\u003c\/p\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":56578196210045,"sku":"114990121","price":2.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Battery-holder-2400px-1_1024x1024_e7667ce2-3f3a-4086-a433-6a36ae546183.jpg?v=1753830876"},{"product_id":"shendrones-3d-printed-frame-parts-for-ichabod-jr-2-0","title":"Shendrones 3D Printed Frame Parts for Ichabod JR. 2.0","description":"\u003cp class=\"font_8\"\u003e\n This is a set of 3D printed parts for the Shendrones Ichabod Jr. 2.0 quadcopter.\n\u003c\/p\u003e\n\u003cp\u003e\n If you have your own 3D printer,\n \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4840558\"\u003e\n  files can be downloaded here\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  2x DJI FPV Antenna mounts\n \u003c\/li\u003e\n \u003cli\u003e\n  1x TBS Crossfire Mount\n \u003c\/li\u003e\n \u003cli\u003e\n  1x TBS Immortal T Mount\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Nose GoPro Mount\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Analog VTX Antenna Mount\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ShenDrones","offers":[{"title":"Default Title","offer_id":56578196996477,"sku":"0E3-C5D-596","price":19.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/ichabod-3d-print-part.jpg?v=1753830883"},{"product_id":"happymodel-ex1002-rs1002-20000kv-unibell-brushless-motor-for-moblite7-hd","title":"Happymodel EX1002 \/ RS1002 20000kV Unibell Brushless Motor for Moblite7 HD","description":"\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Brand name: Happymodel\n \u003c\/li\u003e\n \u003cli\u003e\n  Item name: EX1002 \/ RS1002 brushless motor\n \u003c\/li\u003e\n \u003cli\u003e\n  KV: 20000KV\n \u003c\/li\u003e\n \u003cli\u003e\n  Shaft Diameter: 1.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Configuration: 9N12P\n \u003c\/li\u003e\n \u003cli\u003e\n  Stator Diameter: 10mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Stator Length: 2mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Motor Dimension (Dia.*Len): Φ13.5mm*12.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Terminals: JST1.25mm\n \u003c\/li\u003e\n \u003cli\u003e\n  No. of Cells (Lipo): 20000KV compatible with only 1S lipo\n \u003c\/li\u003e\n \u003cli\u003e\n  Wire length (exclude connector):40mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 2.45g\n \u003c\/li\u003e\n \u003cli\u003e\n  Compatible for Mobula7 1S version, Mobula7 HD 1S version, Moblite7 HDZERO, and Moblite7 avatar.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-647012\" height=\"688\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/EX1002-Datasheet_98b9a3d7-f796-4a47-835b-51356f811353.jpg?v=1754233914\" width=\"785\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cp\u003e\n 1 x EX1002 20000kV brushless motor\n\u003c\/p\u003e\n","brand":"HappyModel","offers":[{"title":"Default Title","offer_id":56578197094781,"sku":"1I30022","price":7.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/EX1002-Motor-HM-5.webp?v=1753830883"},{"product_id":"crazyflie-2-0-female-expansion-connector","title":"Crazyflie 2.0 - Female expansion connector","description":"\u003cp\u003e\n Interested in developing your own hardware for the Crazyflie 2.0? Do you want to create your own expansion board that complies with the current system? Then you will need these female headers that are used for all the expansion boards connected to the Crazyflie 2.0. For more information about the expansion boards for the Crazyflie 2.0, please see the\n \u003ca href=\"http:\/\/www.bitcraze.se\/crazyflie-2-0-buyers-guide\/\"\u003e\n  buyers guide\n \u003c\/a\u003e\n .\n\u003c\/p\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Specifications：\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Number of positions: 10\n \u003c\/li\u003e\n \u003cli\u003e\n  Spacing: 2mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Mechanical specification:\n \u003c\/li\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Weight: 0.2g\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Size (WxHxD): 10x2x3mm (without SMD pads)\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Package Contents：\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  4 x SMD female expansion header\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Resources\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/www.bitcraze.se\/\"\u003e\n   Bitcraze\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/wiki.bitcraze.se\/\"\u003e\n   Wiki\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/forum.bitcraze.se\/\"\u003e\n   Forum\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Support\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n If you have any further question for technical support, please contact\n \u003ca href=\"mailto:support@bitcraze.se\"\u003e\n  support(at)bitcraze.se\n \u003c\/a\u003e\n .\n\u003c\/p\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":56578197356925,"sku":"110990442","price":1.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-Crazyflie_female_expansion_connector__05817.1421160970.1280.1280.jpg?v=1753830888"},{"product_id":"happymodel-rs0802-brushless-motor","title":"HappyModel RS0802 Brushless Motor","description":"\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Brand name: Happymodel\n \u003c\/li\u003e\n \u003cli\u003e\n  Item name: RS0802 brushless motor\n \u003c\/li\u003e\n \u003cli\u003e\n  KV: 20000KV\n \u003c\/li\u003e\n \u003cli\u003e\n  Shaft Diameter: 1.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Configuration: 9N12P\n \u003c\/li\u003e\n \u003cli\u003e\n  Stator Diameter: 8mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Stator Length: 2mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Motor Dimension(Dia.*Len): Φ10.5mm*13.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Terminals: JST1.25mm\n \u003c\/li\u003e\n \u003cli\u003e\n  No. of Cells(Lipo): 20000KV compatible with only 1S lipo\n \u003c\/li\u003e\n \u003cli\u003e\n  Wire length(exclude connector):30mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 2g\n \u003c\/li\u003e\n \u003cli\u003e\n  Compatible for Mobula7 and Mobula7 HD 1S version\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Thrust Data\n\u003c\/h2\u003e\n\u003ctable width=\"613\"\u003e\n \u003ctbody\u003e\n  \u003ctr\u003e\n   \u003ctd colspan=\"11\" width=\"613\"\u003e\n    \u003cstrong\u003e\n     Happymodel RS0802 KV20000 Brushless motor Bench data\n    \u003c\/strong\u003e\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd width=\"58\"\u003e\n    No-load voltage\n   \u003c\/td\u003e\n   \u003ctd width=\"58\"\u003e\n    No-load\n    \u003cbr\u003e\n    current\n   \u003c\/td\u003e\n   \u003ctd width=\"58\"\u003e\n    No-load Speed\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    KV\n   \u003c\/td\u003e\n   \u003ctd width=\"59\"\u003e\n    Voltage\n    \u003cbr\u003e\n    (v)\n   \u003c\/td\u003e\n   \u003ctd width=\"59\"\u003e\n    Current\n    \u003cbr\u003e\n    (A)\n   \u003c\/td\u003e\n   \u003ctd width=\"53\"\u003e\n    Thrust\n    \u003cbr\u003e\n    (g)\n   \u003c\/td\u003e\n   \u003ctd width=\"62\"\u003e\n    Efficiency\n    \u003cbr\u003e\n    (g\/w)\n   \u003c\/td\u003e\n   \u003ctd width=\"59\"\u003e\n    Power\n    \u003cbr\u003e\n    (w)\n   \u003c\/td\u003e\n   \u003ctd colspan=\"2\"\u003e\n    Propeller\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd colspan=\"11\"\u003e\n    Happymodel RS0802-20000KV\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd rowspan=\"8\" width=\"58\"\u003e\n    2\n   \u003c\/td\u003e\n   \u003ctd rowspan=\"8\" width=\"58\"\u003e\n    0.46\n   \u003c\/td\u003e\n   \u003ctd rowspan=\"8\" width=\"58\"\u003e\n    40790\n   \u003c\/td\u003e\n   \u003ctd rowspan=\"8\" width=\"58\"\u003e\n    20395.0\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    3.7\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    0.5\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    6.1\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    3.297\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    1.85\n   \u003c\/td\u003e\n   \u003ctd colspan=\"2\" rowspan=\"8\" width=\"89\"\u003e\n    Gemfan 1610\n    \u003cbr\u003e\n    2-blade propeller\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    3.7\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    1\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    11.3\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    3.054\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    3.7\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    3.7\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    1.5\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    15.9\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    2.865\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    5.55\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    3.7\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    2\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    20.8\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    2.811\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    7.4\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    3.7\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    2.5\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    24.7\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    2.670\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    9.25\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    3.7\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    3\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    29.4\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    2.649\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    11.1\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    3.7\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    3.5\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    32.5\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    2.510\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    12.95\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    3.7\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    3.74\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    34.8\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    2.515\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    13.838\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x RS0802 Motor\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"HappyModel","offers":[{"title":"20000","offer_id":56578198503805,"sku":"AD3-23A-35C","price":7.56,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/RS0802-20000kv-3.jpg?v=1753830905"},{"product_id":"armattan-bobcat-sparce-centre-plate","title":"Armattan Bobcat Sparce Centre Plate","description":"\u003cp\u003e\n This is a replacement centre plate for the Bobcat frame.\n\u003c\/p\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Bobcat Centre Plate\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Armattan","offers":[{"title":"Default Title","offer_id":56578201977213,"sku":"183-B80-3B5","price":8.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Bobcat_Center_Plate__98591.1610010642.jpg?v=1753830935"},{"product_id":"emax-buzz-bottom-plate","title":"EMAX Buzz Bottom Plate","description":"\u003cp\u003e\n This is a replacement bottom plate for the Emax Buzz freestyle quadcopter frame\n\u003c\/p\u003e\n","brand":"Emax","offers":[{"title":"Default Title","offer_id":56578203615613,"sku":"796-1D3-AFC","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Buzz-Bottom-Plate-2.jpg?v=1753830941"},{"product_id":"armattan-bobcat-top-plate","title":"Armattan Bobcat Top Plate","description":"\u003cp\u003e\n This is a replacement Top Plate for the Bobcat frame.\n\u003c\/p\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Bobcat Top Plate\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Armattan","offers":[{"title":"Default Title","offer_id":56578204270973,"sku":"2FB-54A-8C7","price":6.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Bobcat_Top_Plate__68488.1610010665.jpg?v=1753830947"},{"product_id":"emax-buzz-camera-mount","title":"EMAX Buzz Camera Mount","description":"\u003cp\u003e\n This is a replacement aluminium camera mount for the Emax Buzz freestyle quadcopter frame\n\u003c\/p\u003e\n","brand":"Emax","offers":[{"title":"Default Title","offer_id":56578205483389,"sku":"23D-2B2-CDB","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Buzz-Camera-Mount-1.jpg?v=1753830954"},{"product_id":"crazyradio-2-0-long-range-2-4ghz-usb-radio-dongle-with-antenna","title":"Crazyradio 2.0 - long range 2.4GHz USB radio dongle with antenna","description":"\u003cp\u003e\n \u003cstrong\u003e\n  Introducing the Crazyradio 2.0: Your Ticket to Unleashed Connectivity!\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n Say goodbye to unpredictable latency and limited bandwidth. With the Crazyradio 2.0, you'll experience a level of wireless connectivity that'll make you wonder why you didn't switch sooner! This long-range USB radio dongle, based on the nRF52840 chip from Nordic Semiconductor, is more than just a fabulous companion to the Crazyflie family of devices - it's a game-changer for anyone seeking better control and communication.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  🚀\n  \u003cem\u003e\n   Unleash the Power of the Airwaves\n  \u003c\/em\u003e\n  🚀\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n The Crazyradio 2.0 features a 20dBm power amplifier and a low noise amplifier (LNA), giving you the freedom to roam without losing connection.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  🌟\n  \u003cem\u003e\n   Open-Source \u0026amp; Versatile\n  \u003c\/em\u003e\n  🌟\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n This isn't your ordinary dongle. The Crazyradio 2.0 comes with open-source firmware and a Python API, making it a fantastic building block for systems that crave predictability and snappiness.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  🔧\n  \u003cem\u003e\n   Firmware Upgrades Made Easy\n  \u003c\/em\u003e\n  🔧\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n No need for additional hardware - the Crazyradio 2.0 has a bootloader that enables firmware upgrades via USB. Keep up with the times effortlessly!\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  🌐\n  \u003cem\u003e\n   Crazyflie Ecosystem Compatible\n  \u003c\/em\u003e\n  🌐\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n No worries about compatibility; the Crazyradio 2.0 works seamlessly with the Crazyflie ecosystem.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  💡\n  \u003cem\u003e\n   Two Modes, Twice the Fun\n  \u003c\/em\u003e\n  💡\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n The Crazyradio 2.0 can run in two different modes, depending on the installed firmware:\n\u003c\/p\u003e\n\u003col\u003e\n \u003cli\u003e\n  Crazyradio PA emulation - behaves like a Crazyradio PA (initially available)\n \u003c\/li\u003e\n \u003cli\u003e\n  Crazyradio 2.0 - a new set of protocols and capabilities to enhance communication in the ecosystem (work in progress)\n \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003e\n Key Product Highlights:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  20dBm output power for longer range and stronger signal\n \u003c\/li\u003e\n \u003cli\u003e\n  Open-source firmware for customisation and versatility\n \u003c\/li\u003e\n \u003cli\u003e\n  Firmware upgrades via USB for hassle-free updates\n \u003c\/li\u003e\n \u003cli\u003e\n  Low latency for better control and communication\n \u003c\/li\u003e\n \u003cli\u003e\n  Compatible with the Crazyflie ecosystem\n \u003c\/li\u003e\n \u003cli\u003e\n  Two operational modes for added flexibility\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n So, if you're ready to take your connectivity to new heights, add the Crazyradio 2.0 to your cart and watch as your FPV, maker, and IoT dreams come to life. Unmanned Tech is here to support you every step of the way!\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Package contents\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1 x Crazyradio 2.0\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Duck antenna 2dBi\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578206990717,"sku":"8C5-37A-1C2","price":39.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CR2.0585px_1024x1024_4c65441c-37ca-4fe0-96c6-6248bfa97abe.webp?v=1753830962"},{"product_id":"eol-emax-buzz-top-plate","title":"EMAX Buzz Top Plate","description":"\u003cp\u003e\n This is a replacement top plate for the Emax Buzz freestyle quadcopter frame\n\u003c\/p\u003e\n","brand":"Emax","offers":[{"title":"Default Title","offer_id":56578207449469,"sku":"35B-578-106","price":0.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Buzz-Top-Plate-3.jpg?v=1753830967"},{"product_id":"shendrones-3d-printed-frame-parts-for-siccario-x8","title":"Shendrones 3D Printed Frame Parts for Siccario X8","description":"\u003cp\u003e\n \u003cstrong\u003e\n  PLEASE NOTE: If this item is on backorder and not explicitly showing in stock, your order may be delayed prior to shipping while these 3D prints are completed. The usual turnaround time is 1-5 working days, though this will differ depending on circumstances. Please contact us if you have any questions!\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp class=\"font_8\"\u003e\n This is a set of 3D printed parts for the Shendrones Siccario X8 quadcopter.\n\u003c\/p\u003e\n\u003cp\u003e\n If you have your own 3D printer,\n \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4700212\/files\"\u003e\n  files can be downloaded here\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Front Nose Section with DJI FPV Camera Mount and DJI Air Unit Holder\n \u003c\/li\u003e\n \u003cli\u003e\n  2x Side Plate with Antenna mounts (for DJI Air Unit)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Rear Section side Plate\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Rear Crossfire Antenna Mount\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ShenDrones","offers":[{"title":"Default Title","offer_id":56578220523901,"sku":"8DB-3BF-50E","price":7.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/siccario-TPU-Shendrones.jpg?v=1753831062"},{"product_id":"damping-balls-and-the-screw-sets-for-crux3","title":"Damping balls and the screw sets for Crux3","description":"\u003cp\u003e\n \u003cstrong\u003e\n  Happymodel Rubber Damping balls and screws sets for Crux3\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Package include:\n \u003c\/strong\u003e\n \u003cbr\u003e\n Short Rubber damping ball 4pcs\n \u003cbr\u003e\n M2 Nylon nut 8pcs\n \u003cbr\u003e\n M2x12 Screw 4pcs\n\u003c\/p\u003e\n","brand":"HappyModel","offers":[{"title":"Default Title","offer_id":56578221703549,"sku":"E3F-9EE-1A4","price":1.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/20_1000x1000_crop_center_35c7469e-8bfc-4900-a93b-1205817d31f6.jpg?v=1753831080"},{"product_id":"happymodel-ex1202-5-brushless-motor-for-crux3-crux3-nlr-6400kv-11500kv","title":"HappyModel EX1202.5 Brushless Motor for Crux3 \/ Crux3 NLR (6400kV \/ 11500kV)","description":"\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone wp-image-462413 size-full\" height=\"435\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/ex1202-e1614960663802_716512f0-90fe-4052-a128-5946ec7d8cdd.jpg?v=1754233917\" width=\"1000\"\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  6400kV is Crux3 standard motor.\n  \u003cstrong\u003e\n   \u003cbr\u003e\n  \u003c\/strong\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  11500kV is Crux3 NLR standard motor\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specification\n\u003c\/h2\u003e\n\u003cp\u003e\n Mode: EX1202.5\n \u003cbr\u003e\n KV option: KV6400\n \u003cbr\u003e\n Configu-ration:9N12P\n \u003cbr\u003e\n Stator Diamter: 12mm\n \u003cbr\u003e\n Stator Length: 2.5mm\n \u003cbr\u003e\n Out Shaft Diameter:Φ1.5mm\n \u003cbr\u003e\n Inner Shaft Diameter: Φ2mm\n \u003cbr\u003e\n Motor Dimension(Dia.*Len):Φ15mm*15mm\n \u003cbr\u003e\n Weight(g): 4.4g\n \u003cbr\u003e\n No.of Cells(Lipo):KV6400 support 2-3s (Original motors for Crux3)\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x EX1202.5 Brushless Motor\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"HappyModel","offers":[{"title":"6400","offer_id":56578222424445,"sku":"5B0-746-0AA","price":7.95,"currency_code":"GBP","in_stock":true},{"title":"11500","offer_id":56578222457213,"sku":"57A-590-751","price":7.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/2_1000x1000_crop_center_59f17de5-692e-4f6b-a5bc-e20fe7655746.jpg?v=1753831093"},{"product_id":"happymodel-1s-series-lipo-balance-charging-board","title":"HappyModel 1S Series LiPo Balance Charging Board","description":"\u003cp\u003e\n The board supports a maximum 1.5A charging current but charge at 1C to be safe.\n\u003c\/p\u003e\n\u003cp\u003e\n This is a great charger for anyone that would like to charge 1s liPos for your Mobula, Moblite or Mobeetle!\n\u003c\/p\u003e\n\u003ch3\u003e\n Specifications\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Input Voltage: 1S\n \u003c\/li\u003e\n \u003cli\u003e\n  Max Amperage: 1.5A\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions: 81x46x20mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 35g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Includes\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x HappyModel 1S Series LiPo Balance Charging Board\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"BetaFPV","offers":[{"title":"Default Title","offer_id":56578222555517,"sku":"HM-1253BRD","price":8.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/HappyModel-Mobula7-1S-Replacemen_1800x1800_ef8f84b6-0705-4428-9ad5-41d8e081ab6a.jpg?v=1753831097"},{"product_id":"tmotor-m12199-65mm-whoop-propeller-1-0mm","title":"Tmotor M12199 65mm Whoop Propeller (1.0mm)","description":"\u003cdiv class=\"col-md-6 caracteristique-hidden\"\u003e\n \u003cp\u003e\n  \u003c\/p\u003e\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 10px 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ZvPet0MN5zE\" frameborder=\"0\" allowfullscreen style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u0026amp;feature=emb_title\n \n \u003ch2\u003e\n  Specifications\n \u003c\/h2\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Size : 1.2\"\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Weight : 0.22g\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Pitch : 1.9\"\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Hub : 4.3mm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Shaft : 1mm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Adaptive Motor : M0802\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Diameter : 31mm\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cimg class=\"aligncenter\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/TM-M1219-Props-Info.jpg?v=1754237801\"\u003e\n \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-md-6 caracteristique-hidden\"\u003e\n \u003ch2\u003e\n  Included\n \u003c\/h2\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   2x CW M12199 Propeller\n  \u003c\/li\u003e\n  \u003cli\u003e\n   2x CCW M12199 Propeller\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"T-Motor","offers":[{"title":"Turquoise","offer_id":56578227077501,"sku":"TM-M12199-BLUE","price":1.09,"currency_code":"GBP","in_stock":true},{"title":"Grey","offer_id":56578227110269,"sku":"TM-M12199-GREY","price":1.09,"currency_code":"GBP","in_stock":true},{"title":"Purple","offer_id":56578227143037,"sku":"TM-M12199-VIOLET","price":1.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/TM-M12199-5.jpg?v=1753831117"},{"product_id":"crazyflie-lighthouse-positioning-deck","title":"Crazyflie Lighthouse Positioning Deck","description":"\u003cp\u003e\n The position and pose is calculated directly in the Crazyflie, which makes it possible to create fully autonomous systems without external communication.\n\u003c\/p\u003e\n\u003cp\u003e\n On-board position calculation and low complexity makes it the ideal choice for everything from big laboratories to small classrooms.\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  High accuracy positioning\n \u003c\/li\u003e\n \u003cli\u003e\n  Supports\n  \u003ca href=\"https:\/\/www.vive.com\/us\/accessory\/base-station\/\" rel=\"noopener\" target=\"_blank\"\u003e\n   HTC Vive Base Station\n  \u003c\/a\u003e\n  and\n  \u003ca href=\"https:\/\/www.vive.com\/eu\/accessory\/base-station2\/\" rel=\"noopener\" target=\"_blank\"\u003e\n   SteamVR Base Station 2.0\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  On-board FPGA for signal processing with open source toolchain\n \u003c\/li\u003e\n \u003cli\u003e\n  UART and I2C communication to Crazyflie deck expansion port\n \u003c\/li\u003e\n \u003cli\u003e\n  UART pads available to solder a 2.54mm pin header for connection to external system, eg. Arduino\n \u003c\/li\u003e\n \u003cli\u003e\n  UART and I2C bootloader to program the FPGA configuration\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cp\u003e\n 1 x Lighthouse positioning deck\n\u003c\/p\u003e\n\u003ch2 class=\"level2\"\u003e\n Resources\n\u003c\/h2\u003e\n\u003cdiv class=\"level2\"\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   \u003ca href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/lighthouse_deck\/lighthouse_deck-datasheet.pdf\"\u003e\n    Datasheet\n   \u003c\/a\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n   \u003ca href=\"https:\/\/www.bitcraze.io\/documentation\/hardware\/lighthouse_deck\/lighthouse_deck-revd.pdf\"\u003e\n    Schematics\n   \u003c\/a\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n   \u003ca href=\"https:\/\/www.bitcraze.io\/products\/lighthouse-positioning-deck\/\"\u003e\n    Web page\n   \u003c\/a\u003e\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578229600637,"sku":"114991751","price":90.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/45-Lighthouse-deck-585px.webp?v=1753831123"},{"product_id":"eol-shendrones-3d-printed-frame-parts-for-thicc-2-1","title":"Shendrones 3D Printed Frame Parts for Thicc 2.1","description":"\u003cp class=\"font_8\"\u003e\n This is a set of 3D printed parts for the Shendrones Thicc V2 X8 quadcopter.\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  include 4x Landing gear, fpv cam mount, and both types of camera mount dampers, DJI Air Unit sleeve, Antenna Mounts.  Full list of 3D print files are\n  \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4213245\"\u003e\n   available here\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  4x Landing Gear Legs\n \u003c\/li\u003e\n \u003cli\u003e\n  1x FPV Camera Mount\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Regular Camera Mount Damper set\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Adjustable Camera Mount Damper set\n \u003c\/li\u003e\n \u003cli\u003e\n  1x DJI Air Unit sleeve\n \u003c\/li\u003e\n \u003cli\u003e\n  2x DJI FPV Antenna Mount\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ShenDrones","offers":[{"title":"Default Title","offer_id":56578230124925,"sku":"531-F26-0C8","price":1.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Thicc-3D-Parts.jpg?v=1753831128"},{"product_id":"crazyflie-lighthouse-v2-base-station","title":"Crazyflie Lighthouse V2 Base Station","description":"\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Enables on-board positioning for the Crazyflie\n \u003c\/li\u003e\n \u003cli\u003e\n  1\/4' standard attachment\n \u003c\/li\u003e\n \u003cli\u003e\n  3 meter power chord\n \u003c\/li\u003e\n \u003cli\u003e\n  Wall mount\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Max range: 5 meters\n \u003c\/li\u003e\n \u003cli\u003e\n  Contains SteamVR Base Station 2.0 (V003450-00-A)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Mechanical specifications\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Basestation\n  \u003cul\u003e\n   \u003cli\u003e\n    1\/4' mounting screw in bottom and back of the base station\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight: 266g\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Size (WxHxD): 80x74x63mm\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Power adapter\n  \u003cul\u003e\n   \u003cli\u003e\n    3 meter chord\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Power plug adapters for EU\/US\/UK\/JP\/AU\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight: 240g\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Size (WxHxD): 40x64x34mm (without cable and plug)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Wall mount\n  \u003cul\u003e\n   \u003cli\u003e\n    Height: 10 cm\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Base diameter: 5,7 cm\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight: 44 g\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cp\u003e\n 1 x SteamVR Base Station 2.0\n \u003cbr\u003e\n 1 x 12V DC adapter with 3 meter cord (including adapters for US\/EU\/JP\/UK\/AU)\n \u003cbr\u003e\n 1 x Wall mount with 1\/4' mounting screw including screws for attachment to the wall\n\u003c\/p\u003e\n","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578232058237,"sku":"800000002","price":230.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/basestation_side_1024px_1024x1024_9c352363-15be-490a-a692-42ce135b7768.webp?v=1753831136"},{"product_id":"replacement-flight-controller-for-cetus-brushed","title":"Replacement Flight Controller for Cetus (Brushed)","description":"\u003cp\u003e\n This is a replacement flight controller for the Cetus FPV Drone.  Only to be used as a replacement part for the official Cetus drone should you crash or damage something.\n\u003c\/p\u003e\n\u003cp\u003e\n We will not offer any support for this if you want to use the board on your own custom drone\/project and is sold as is with no documentation.\n\u003c\/p\u003e\n","brand":"BetaFPV","offers":[{"title":"Default Title","offer_id":56578232713597,"sku":"B01040004_1","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/18999-20220211-3.webp?v=1772643072"},{"product_id":"shendrones-3d-printed-skirt-for-hydrophobe","title":"Shendrones 3D Printed Skirt for Hydrophobe","description":"\u003cp class=\"font_8\"\u003e\n This is a skirt for the shendrones hydrophobe quadcopter.  Available in an analog\/Vista configuration for a single VTX antenna, or a DJI version with 2x antenna holders.\n\u003c\/p\u003e\n\u003cp class=\"font_8\"\u003e\n Add some sealant between the top and bottom of this skirt to make your quad electronics more water resistant\n\u003c\/p\u003e\n\u003cp\u003e\n If you have your own 3D printer,\n \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4227933\/files\"\u003e\n  files can be downloaded here\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Skirt\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ShenDrones","offers":[{"title":"DJI Digital","offer_id":56578232844669,"sku":"748-3D7-F5A","price":9.95,"currency_code":"GBP","in_stock":false},{"title":"Analog\/Vista","offer_id":56578232877437,"sku":"533-947-862","price":0.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/hydrophobe-digital-skirt.jpg?v=1753831140"},{"product_id":"alien-5-body-kit-standard-slammed","title":"ImpulseRC Alien 5\" Body Kit (Standard \/ Slammed)","description":"\u003cp\u003e\n This is a pack of parts for an Alien 5\" quadcopter body.  Available in the standard and slammed configuration.  The slammed configuration is a low profile designed around micro cameras (and is not compatible with standard\/mini cameras like the normal Alien 5\" body.\n\u003c\/p\u003e\n\u003cp\u003e\n To make this a complete Alien Frame Kit you will need to include:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1 x Alien 4 pack of arms\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Alien screw pack\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ImpulseRC","offers":[{"title":"Slammed","offer_id":56578237137277,"sku":"25E-AD2-D10","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"Normal","offer_id":56578237170045,"sku":"B94-7B2-3AD","price":9.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/A5-Bodykit_800x_3e57e81b-1d94-4044-8c4b-c0b00986c513.jpg?v=1753831170"},{"product_id":"diatone-black-canvas-bag","title":"Diatone Black Canvas Bag","description":"\u003cp\u003e\n This is a black canvas bag from Diatone that measures 27x38cm. Be honest with yourself, this is what is missing in your life...\n\u003c\/p\u003e\n","brand":"Diatone","offers":[{"title":"Default Title","offer_id":56578237497725,"sku":"E3C-836-EA5","price":0.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-diatone_canvas_black_bag_27x38cm__59071.1513335671.1280.1280.jpg?v=1753831178"},{"product_id":"high-landing-gear-for-f450-sk480-f550","title":"High Landing Gear for F450\/SK480\/F550","description":"\u003cp\u003e\n This is a pack of 4 landing legs suitable for F450, F550, SK450, SK480 and many more frames. They provide extra clearance off the ground as each leg measures in at 15cm tall, ensuring that much extra protection for your flying platform and the various equipment you have on there. This package also includes a pack of 8 M2.5 screws for attaching these legs to your frame. These are a perfect little accessory to your flying platform\n\u003c\/p\u003e\n\u003ch3\u003e\n Description:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Product Name: High Landing Skid\n \u003c\/li\u003e\n \u003cli\u003e\n  Height: 150mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 90grams\n \u003c\/li\u003e\n \u003cli\u003e\n  4pcs universal high landing gear skids for DJI F450,F550,SK450,SK480,TL450etc. (Frame not included).\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Package Includes:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  4 X High Landing Leg\n \u003c\/li\u003e\n \u003cli\u003e\n  8 X M2.5 Screws\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Unmanned Tech","offers":[{"title":"White","offer_id":56578237563261,"sku":"722-E27-DD6","price":1.21,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":56578237596029,"sku":"7F7-93C-9D1","price":3.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-763_source_1439556324.jpg?v=1753831177"},{"product_id":"65mm-toothpick-2-blade-propeller-1-5mm-pack-of-12","title":"65mm Toothpick 2 Blade Propeller (1.5mm) (pack of 12)","description":"\u003cdiv\u003e\n This is a pack of 6 sets (6x CW and 6x CCW) 65mm propellers, ideal for toothpick builds.  These props fit motors with 1.5mm shafts.\n\u003c\/div\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Item Name: Propeller\n \u003c\/li\u003e\n \u003cli\u003e\n  Blade Diameter: 65mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Shaft diameter: 1.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Colours: see options\n \u003c\/li\u003e\n \u003cli\u003e\n  Usage: Used for brushed or brushless toothpick builds (usually 1102 or 1103 motors)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  6 x Propeller Sets (6x CW, 6x CCW)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Unmannedtech","offers":[{"title":"Blue","offer_id":56578248114557,"sku":"F0B-BBA-92D","price":0.45,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":56578248147325,"sku":"A8D-577-454","price":0.45,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56578248180093,"sku":"619-A76-C89","price":0.45,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":56578248212861,"sku":"6C8-E1E-D46","price":0.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/65mm-toothpick-2-e1726346426641.jpg?v=1753831252"},{"product_id":"radiomaster-tx16s-cnc-ag01-hall-gimbal-throttle","title":"Radiomaster TX16S CNC AG01 Hall Gimbal - Throttle","description":"\u003cp\u003e\n Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX16s to the next level.\n\u003c\/p\u003e\n\u003cp\u003e\n The AG01 gimbals have been in development with our engineers and champion pro pilots such as MCK, Alex Campbell, Noical, Veysi.FPV, AZFPV, Xiao Zheng, and Long XL meet the demanding requirements of the world's most competitive racing events.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003c\/p\u003e\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 10px 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/-qhHT6i9aNI\" frameborder=\"0\" allowfullscreen style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Designed specifically for the RadioMaster TX16S Radio\n \u003c\/li\u003e\n \u003cli\u003e\n  Mode Switching Throttle Tension Adjustment\n \u003c\/li\u003e\n \u003cli\u003e\n  CNC Aviation-Grade Aluminum\n \u003c\/li\u003e\n \u003cli\u003e\n  Spring Tension Adjustment\n \u003c\/li\u003e\n \u003cli\u003e\n  Non-Contact Hall Sensors\n \u003c\/li\u003e\n \u003cli\u003e\n  Quad Precision Bearings\n \u003c\/li\u003e\n \u003cli\u003e\n  Stick Travel Adjustment\n \u003c\/li\u003e\n \u003cli\u003e\n  Ergonomic Stick Ends\n \u003c\/li\u003e\n \u003cli\u003e\n  Adjustable Exterior\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Product Description: Full CNC Gimbal - Throttle\n \u003c\/li\u003e\n \u003cli\u003e\n  Adjustable travel range: 38°- 54°\n \u003c\/li\u003e\n \u003cli\u003e\n  Temperature range: -20°c-85°c\n \u003c\/li\u003e\n \u003cli\u003e\n  Linearity: Real-time (No delay)\n \u003c\/li\u003e\n \u003cli\u003e\n  Working voltage: DC 3.3V\n \u003c\/li\u003e\n \u003cli\u003e\n  Adjustable tension: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n  Adjustable mode: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n  Product model: AG01\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 60*53*56mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Quad bearing: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n  Sensing type: Hall\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 82g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Radiomaster TX16S CNC Hall Gimbal - Throttle\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Lubricating Oil\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Damping Oil\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RadioMaster","offers":[{"title":"Default Title","offer_id":56578249163133,"sku":"071-5F5-66F","price":61.59,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/radiomaster_tx16s_ag01_cnc_metal_gimbalthrottle.jpg?v=1753831270"},{"product_id":"eol-shendrones-3d-printed-frame-parts-for-swol-x8","title":"Shendrones 3D Printed Frame Parts for SWOL X8","description":"\u003cp class=\"font_8\"\u003e\n This is a set of 3D printed parts for the Shendrones SWOL X8 quadcopter.\n\u003c\/p\u003e\n\u003cp\u003e\n If you have your own 3D printer,\n \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5031648\/files\"\u003e\n  files can be downloaded here\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  3d Printed parts pack for SWOL\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ShenDrones","offers":[{"title":"Default Title","offer_id":56578249884029,"sku":"SWOL-3DP","price":0.9,"currency_code":"GBP","in_stock":true}]},{"product_id":"radiomaster-tx16s-cnc-ag01-hall-gimbal-centering","title":"Radiomaster TX16S CNC AG01 Hall Gimbal - Centering","description":"\u003cp\u003e\n Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX16s to the next level.\n\u003c\/p\u003e\n\u003cp\u003e\n The AG01 gimbals have been in development with our engineers and champion pro pilots such as MCK, Alex Campbell, Noical, Veysi.FPV, AZFPV, Xiao Zheng, and Long XL meet the demanding requirements of the world's most competitive racing events.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003c\/p\u003e\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 10px 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/-qhHT6i9aNI\" frameborder=\"0\" allowfullscreen style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Designed specifically for the RadioMaster TX16S Radio\n \u003c\/li\u003e\n \u003cli\u003e\n  Mode Switching Throttle Tension Adjustment\n \u003c\/li\u003e\n \u003cli\u003e\n  CNC Aviation-Grade Aluminum\n \u003c\/li\u003e\n \u003cli\u003e\n  Spring Tension Adjustment\n \u003c\/li\u003e\n \u003cli\u003e\n  Non-Contact Hall Sensors\n \u003c\/li\u003e\n \u003cli\u003e\n  Quad Precision Bearings\n \u003c\/li\u003e\n \u003cli\u003e\n  Stick Travel Adjustment\n \u003c\/li\u003e\n \u003cli\u003e\n  Ergonomic Stick Ends\n \u003c\/li\u003e\n \u003cli\u003e\n  Adjustable Exterior\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Product Description: Full CNC Gimbal - Self-Centering\n \u003c\/li\u003e\n \u003cli\u003e\n  Adjustable travel range: 38°- 54°\n \u003c\/li\u003e\n \u003cli\u003e\n  Temperature range: -20°c-85°c\n \u003c\/li\u003e\n \u003cli\u003e\n  Linearity: Real-time (No delay)\n \u003c\/li\u003e\n \u003cli\u003e\n  Working voltage: DC 3.3V\n \u003c\/li\u003e\n \u003cli\u003e\n  Adjustable tension: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n  Adjustable mode: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n  Product model: AG01\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 60*53*56mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Quad bearing: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n  Sensing type: Hall\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 82g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Radiomaster TX16S CNC Hall Gimbal - Self-Centering\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Lubricating Oil\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Damping Oil\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RadioMaster","offers":[{"title":"Default Title","offer_id":56578249916797,"sku":"25E-6EC-EC4","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/radiomaster_tx16s_ag01_cnc_metal_gimbalcentre.jpg?v=1753831283"},{"product_id":"2x-replacement-abs-duct-for-thefpv-reptile-cinewhoop-3-props","title":"2x Replacement ABS Duct for TheFPV Reptile Cinewhoop (3\" props)","description":"\u003cp\u003e\n This is a set of 2x replacement ducts for\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/thefpv-reptile-3-dji-hd-fpv-cinewhoop-frame\/\"\u003e\n  TheFPV Reptile Cinewhoop\n \u003c\/a\u003e\n They are made form injection moulded ABS plastic making them much more professional looking and stronger than 3D printed ducts.\n\u003c\/p\u003e\n\u003cp\u003e\n We also sell EVA foam to add some extra cushioning to your quadcopter frame.\n\u003c\/p\u003e\n","brand":"Diatone","offers":[{"title":"Black","offer_id":56578252079485,"sku":"8DF-073-5DE","price":4.99,"currency_code":"GBP","in_stock":false},{"title":"Red","offer_id":56578252112253,"sku":"484-230-8A0","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Reptile-3-duct-black.jpg?v=1753831284"},{"product_id":"happymodel-4x-ex1103s-7000kv-8000kv-motor-pack-for-toothpicks-larva-x","title":"Happymodel 4x EX1103S (7000kV \/ 8000kV) Motor Pack for Toothpicks \/ Larva X","description":"\u003cp\u003e\n \u003cstrong\u003e\n  NOTE: These motors are updated with a 4-Hole mounting pattern, not the old 3 hole pattern.\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n The EX 1103 motors from happymodel are one of the best bang for buck toothpick motors around.  The generate great power, last a long time and are pretty lightweight too.\n\u003c\/p\u003e\n\u003cp\u003e\n The 7000Kv version is used for the larva X\n\u003c\/p\u003e\n\u003cp\u003e\n This listing is is a pack of 4x motors.\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  High efficiency and smooth\n \u003c\/li\u003e\n \u003cli\u003e\n  Dual bearing design and more balance\n \u003c\/li\u003e\n \u003cli\u003e\n  Better for Toothpick building\n \u003c\/li\u003e\n \u003cli\u003e\n  1.5mm shaft\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Mode: EX1103S\n \u003c\/li\u003e\n \u003cli\u003e\n  KV options: 7000kV or 8000kV\n \u003c\/li\u003e\n \u003cli\u003e\n  Configuration: 9N12P\n \u003c\/li\u003e\n \u003cli\u003e\n  Stator Diamter: 11mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Stator Length: 3mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Shaft Diameter: Φ1.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  No.of Cells(Lipo): 2S-3S\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cp\u003e\n 4 x EX1103S brushless motor\n\u003c\/p\u003e\n","brand":"HappyModel","offers":[{"title":"7000","offer_id":56578253619581,"sku":"CB6-6BB-ECE","price":29.25,"currency_code":"GBP","in_stock":true},{"title":"8000","offer_id":56578253652349,"sku":"174-5B8-614","price":29.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1005-1.jpg?v=1753831292"},{"product_id":"xt30-battery-wire-with-100μf-capacitor","title":"XT30 Battery Wire with 100μF Capacitor","description":"\u003cp\u003e\n This is a male XT30 connector with an added 16V 100μF Capacitor to help filter out any voltage spikes.  It is desgned to be used with the crazybee series of boards but can be used on any other FC too.\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Brand name: Happymodel\n \u003c\/li\u003e\n \u003cli\u003e\n  Item name: XT30 Plug Pigtail Power Wire with 100μF Capacitor\n \u003c\/li\u003e\n \u003cli\u003e\n  Wire length: 70mm(include xt30)\n \u003c\/li\u003e\n \u003cli\u003e\n  Height: 2.6gram\n \u003c\/li\u003e\n \u003cli\u003e\n  Used for :  Crazybee F3 \/ F4 PRO series flight controller\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"HappyModel","offers":[{"title":"Default Title","offer_id":56578262663549,"sku":"B06-9B7-EEB","price":1.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/XT30CAP.jpg?v=1753831376"},{"product_id":"udirc-tyres-a-ud1601-005a","title":"UDIRC Tyres A (UD1601-005A)","description":"\u003cp\u003e\n This is a spare set of type A tyres for the UDIRC Drift series of R\/C Cars.\n\u003c\/p\u003e\n\u003cp\u003e\n Part Number UD1601-005A\n\u003c\/p\u003e\n","brand":"UDI RC","offers":[{"title":"Default Title","offer_id":56578262925693,"sku":"135-D77-FF3","price":9.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/ud1601-005a_1.jpg?v=1753831378"}],"url":"https:\/\/www.unmannedtechshop.co.uk\/collections\/spares.oembed?page=21","provider":"Unmanned Tech","version":"1.0","type":"link"}