{"title":"Sensors","description":null,"products":[{"product_id":"grove-rtc-1","title":"Grove - RTC","description":"\u003cp\u003e\n The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock\/calendar provides seconds, minutes, hours, day, date,month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM\/PM indicator.\n\u003c\/p\u003e\n\u003cdiv\u003e\n \u003cstrong\u003e\n  Note\n \u003c\/strong\u003e\n : Battery is not included.\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Features\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Real-Time Clock (RTC) counts seconds,minutes, hours, date of the month, month,day of the week, and year with Leap-Year compensation valid up to 2100\n   \u003c\/li\u003e\n   \u003cli\u003e\n    56-Byte, Battery-Backed, Nonvolatile (NV)RAM for data storage\n   \u003c\/li\u003e\n   \u003cli\u003e\n    I2C serial interface\n   \u003c\/li\u003e\n   \u003cli\u003e\n    5V DC supply\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Programmable Square-Wave output signal\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Automatic Power-Fail detect and switch circuitry\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Consumes less than 500nA in Battery-Backup Mode with Oscillator Running\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cdiv\u003e\n   \u003chr\u003e\n   \u003ch3\u003e\n    \u003cspan class=\"mw-headline\" id=\"Application_Ideas\"\u003e\n     Application Ideas\n    \u003c\/span\u003e\n   \u003c\/h3\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     Calendar\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Intelligent instrument\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Industrial control\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003chr\u003e\n   \u003ch3\u003e\n    \u003cspan class=\"mw-headline\" id=\"Cautions\"\u003e\n     Cautions\n    \u003c\/span\u003e\n   \u003c\/h3\u003e\n   \u003cp\u003e\n    In order to gain a robust performance, you must put a 3-Volt CR1225 lithium cell in the battery-holder. If you use the primary power only, the module may not work normally, because the crystal may not oscillate.\n   \u003c\/p\u003e\n   \u003chr\u003e\n   \u003ch3\u003e\n    Documents\n   \u003c\/h3\u003e\n   \u003cp\u003e\n    Please visit our\n    \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Seeeduino_v2.21\"\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Twig_-_RTC\"\u003e\n     wiki page\n    \u003c\/a\u003e\n    for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials\n   \u003c\/p\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578054750589,"sku":"SEN12671P","price":7.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/httpsstatics3.seeedstudio.comseeedfile2018-07bazaar881155_3.jpg?v=1753828933"},{"product_id":"grove-alcohol-sensor-1","title":"Grove - Alcohol Sensor","description":"\u003cp\u003e\n The Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable for portable alcohol detector.\n\u003c\/p\u003e\n\u003cdiv\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Specifications\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Power requirements: 5 VDC @ ~120 mA (heater on)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Detection Gas: Alcohol\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Concentration: 20-1000ppm Alcohol\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Interface: 1 TTL compatible input (SEL), 1 TTL compatible output (DAT)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Dimension: 40×20×12mm\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Heater Voltage: 0.9V ± 0.1V AC or DC\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Heater Current: 120±20mA\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cdiv\u003e\n   \u003chr\u003e\n   \u003ch3\u003e\n    \u003cstrong\u003e\n     Application Ideas\n    \u003c\/strong\u003e\n   \u003c\/h3\u003e\n   \u003cdiv\u003e\n    \u003cul\u003e\n     \u003cli\u003e\n      Alcohol level over-limit alarm\n     \u003c\/li\u003e\n     \u003cli\u003e\n      Stand-alone\/background sensing device\n     \u003c\/li\u003e\n     \u003cli\u003e\n      Environmental monitoring equipment\n     \u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cdiv\u003e\n     \u003chr\u003e\n     \u003ch3\u003e\n      Documents\n     \u003c\/h3\u003e\n     \u003cul\u003e\n      \u003cli\u003e\n       \u003ca class=\"external text\" href=\"http:\/\/garden.seeedstudio.com\/index.php?title=File:Twig_Alcohol_Sensor_MQ303A_Response_Characteristics.pdf\" rel=\"nofollow\"\u003e\n        MQ303A Alcohol Sensor - Response Characteristics High Res PDF\n       \u003c\/a\u003e\n      \u003c\/li\u003e\n      \u003cli\u003e\n       \u003cstrong\u003e\n        Please visit our\n        \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Seeeduino_v2.21\"\u003e\n        \u003c\/a\u003e\n        \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Twig_-_Alcohol_Sensor\"\u003e\n         wiki page\n        \u003c\/a\u003e\n        for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials\n       \u003c\/strong\u003e\n      \u003c\/li\u003e\n     \u003c\/ul\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578054947197,"sku":"SEN21723P","price":7.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/httpsstatics3.seeedstudio.comseeedfile2018-07bazaar885599_a3.jpg?v=1753828960"},{"product_id":"grove-dust-sensor-1","title":"Grove - Dust Sensor","description":"\u003cdiv\u003e\n Sensor is to create Digital (Lo Pulse) output to Particulate Matters (PM). Lo Pulse Occupancy time (LPO time) is in proportion to PM concentration. The output is for PM whose size is around 1 micro meter or larger. We can use the sensor to detect the dust in clean room.\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Features\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cdiv\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Grove compatible interface(extra wire with connecter)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Supply voltage range: 5V\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Minimum detect particle: 1um\n  \u003c\/li\u003e\n  \u003cli\u003e\n   PWM output\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Dimensions:59(W)x45(H)x22(D) [mm]\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Application Ideas\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cdiv\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Air quality sensor\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Dustlessness workshop\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Cigarette detector\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Documents\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cdiv\u003e\n Please visit our\n \u003ca href=\"http:\/\/www.seeedstudio.com\/wiki\/Grove_-_Dust_sensor\"\u003e\n  wiki\n \u003c\/a\u003e\n page for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578064023933,"sku":"SEN12291P","price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-dustsensor_01__64650.1417027927.1280.1280.jpg?v=1753829030"},{"product_id":"grove-ultrasonic-distance-sensor-1","title":"Grove - Ultrasonic Distance Sensor","description":"\u003cdiv\u003e\n The Grove - Ultrasonic Distance Sensor is an\n \u003cstrong\u003e\n  ultrasonic transducer\n \u003c\/strong\u003e\n that utilizes ultrasonic waves to measures distance. It can measure from 3cm to 350cm with the accuracy up to 2mm.  It is a perfect ultrasonic module for distance measurement, proximity sensors, and ultrasonic detector.\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n This module has an ultrasonic transmitter and an ultrasonic receiver so you can consider it as an ultrasonic transceiver. Familiar with sonar, when the 40KHz ultrasonic wave generated by the transmitter encounters the object, the sound wave will be emitted back, and the receiver can receive the reflected ultrasonic wave. It is only necessary to calculate the time from the transmission to the reception, and then multiply the speed of the sound in the air(340 m\/s) to calculate the distance from the sensor to the object.\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/?attachment_id=127516#main\" rel=\"attachment wp-att-127516\"\u003e\n  \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-127516\" height=\"644\" src=\"https:\/\/www.unmannedtechshop.co.uk\/wp-content\/uploads\/2014\/11\/Grove-Ultrasonic-Distance-Sensor-pinout.jpg\" width=\"1024\"\u003e\n \u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n Compared with traditional ultrasonic modules\n \u003cstrong\u003e\n  HC-SR04\n \u003c\/strong\u003e\n , the Grove - Ultrasonic Distance Sensor integrates a single-chip microcomputer, and the transmitting signal and the receiving signal share one pin by time division multiplexing, so only one I\/O pin is occupied. Another difference is that HC-SR04 only supports 5v voltage, while Grove - Ultrasonic Distance Sensor supports 5v and 3.3v. As we know, the Raspberry pi I\/O only supports 3.3v. Therefore, Grove - Ultrasonic Distance Sensor can be directly connected to the I\/O of the Raspberry Pi, but HC-SR04 needs to use a voltage conversion circuit.\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003cdiv\u003e\n  \u003cdiv\u003e\n   What's more, we provide full documents and libraries for Arduino, Python, and Codecraft so that you can use the Grove - Ultrasonic Distance Sensor with Arduino and Raspberry pi easily. Wide voltage range, single I\/O pin, plug and play Grove connector, we try our best to make this module easier to use and reduce your work. This is exactly the philosophy of Grove: simple is the best. We hope you like it.\n  \u003c\/div\u003e\n \u003c\/div\u003e\n \u003ch2\u003e\n  Features\n \u003c\/h2\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   3.3v \/ 5v compatible, wide voltage level: 3.2v~5.2v\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Only 3 pins needed, save I\/O resources\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Wide measurement range: 3cm ~ 350cm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Easy to use: grove connector, plug and play\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch2\u003e\n  Applications\n \u003c\/h2\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Distance measurement\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Ultrasonic detector\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Proximity alarm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Smart car\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578064122237,"sku":"SEN10737P","price":3.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/grove-ultrasonic-distance-sensor-preview_1.jpg?v=1753829044"},{"product_id":"grove-pir-motion-sensor-1","title":"Grove - PIR Motion Sensor","description":"\u003cdiv\u003e\n This is a simple to use PIR motion sensor with Grove compatible interface. Simply connect it to Stem shield and program it, when anyone moves in its detecting range, the sensor outputs HIGH on its SIG pin.\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n The detecting range and response speed can be adjusted by 2 potentiometers soldered on its circuit board, The response speed is from 0.3s - 25s, and max 6 meters of detecting range.\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Specifications\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Grove compatible interface\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Voltage range: 3V-5V\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2.0cm x 4.0cm twig module\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Detecting angle: 120 degree\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Detecting distance: max 6m\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Adjustable detecting distance and holding time\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/div\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Application Ideas\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Motion sensor\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Thief-guarding System\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Switch\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Industrial automation\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003chr\u003e\n  \u003ch3\u003e\n   \u003cstrong\u003e\n    Documents\n   \u003c\/strong\u003e\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   Please visit our\n   \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Seeeduino_v2.21\"\u003e\n   \u003c\/a\u003e\n   \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Twig_-_PIR_Motion_Sensor\"\u003e\n    wiki page\n   \u003c\/a\u003e\n   for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials\n  \u003c\/p\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578069496189,"sku":"SEN32357P","price":6.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Grove-PIR1.jpg?v=1753829101"},{"product_id":"grove-line-finder-v1-2","title":"Grove - Line Finder v1.1","description":"\u003cp\u003e\n Most of automated robotic projects start from a line-following robot, Grove - Line finder v1.1 is designed to achieve this task easily and quickly. Those eye-like sensors on the board are actually IR emitting LED and sensitive phototransistor. When the phototransistor detects the reflected infrared light from the IR emitting LED, it will output a digital signal, which changes from HIGH to LOW.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Features\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n \u003cli\u003e\n  Easy to use\n \u003c\/li\u003e\n \u003cli\u003e\n  Integrated indicator LED\n \u003c\/li\u003e\n \u003cli\u003e\n  Digital output\n \u003c\/li\u003e\n \u003cli\u003e\n  Adjustable detecting range.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Specifications\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n \u003cli\u003e\n  Power supply: 5V DC\n \u003c\/li\u003e\n \u003cli\u003e\n  Digital output mode: TTL (High when black is detected, Low when white is detected)\n \u003c\/li\u003e\n \u003cli\u003e\n  Connector: 4 pin Buckled Grove interface\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimension: 20mm*20mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Comparator: LMV358\n \u003c\/li\u003e\n \u003cli\u003e\n  Photo reflective diode: RS-06WD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578069987709,"sku":"SEN21177P","price":3.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/f7977d25c91ae8cb643e6e27412c097e.image_1024_1.jpg?v=1753829115"},{"product_id":"grove-80cm-infrared-proximity-sensor-1","title":"Grove - 80cm Infrared Proximity Sensor","description":"\u003cp\u003e\n \u003cspan\u003e\n  The 80cm Infrared Proximity Sensor is a General Purpose Type Distance Measuring Sensors, this sensor takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4\") to 80cm (30\"). Can be used in TVs,personal computers ,cars and so on.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Features\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Grove interface compatible\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Wide supply voltage range: 2.5V-7V\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003chr\u003e\n  \u003ch3\u003e\n   \u003cstrong\u003e\n    Interface\n   \u003c\/strong\u003e\n  \u003c\/h3\u003e\n \u003c\/div\u003e\n \u003cdiv\u003e\n  This sensor is quite small and use a tiny connector called the Japan Solderless Terminal (JST) connector. These connectors have three wires: ground, vcc, and the output. Because the sensor fire continuously and don't need any clocking to initiate a reading, it is easy to interface with any microcontroller. for the seeeduino, the wire convert the 3-wire to 4-wire ,to compatible with the twig interface of Grove .\n \u003c\/div\u003e\n \u003cdiv\u003e\n  \u003chr\u003e\n  \u003ch3\u003e\n   \u003cspan class=\"mw-headline\" id=\"Theory_of_Operation\"\u003e\n    Theory of Operation\n   \u003c\/span\u003e\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   This new rangers use triangulation and a small linear CCD array to compute the distance and\/or presence of objects in the field of view. The basic idea is this: a pulse of IR light is emitted by the emitter. This light travels out in the field of view and either hits an object or just keeps on going. In the case of no object, the light is never reflected and the reading shows no object. If the light reflects off an object, it returns to the detector and creates a triangle between the point of reflection, the emitter, and the detector.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca class=\"image\" href=\"http:\/\/www.seeedstudio.com\/wiki\/File:Theory_of_PSD.jpg\" title=\"Theory of PSD.jpg\"\u003e\n    \u003cimg alt=\"Theory of PSD.jpg\" height=\"260\" src=\"https:\/\/www.unmannedtechshop.co.uk\/wp-content\/uploads\/2018\/12\/Theory_of_PSD.jpg\/400px-Theory_of_PSD.jpg\" width=\"400\"\u003e\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The angles in this triangle vary based on the distance to the object. The receiver portion of these new detectors is actually a precision lens that transmits the reflected light onto various portions of the enclosed linear CCD array based on the angle of the triangle described above. The CCD array can then determine what angle the reflected light came back at and therefore, it can calculate the distance to the object.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This new method of ranging is almost immune to interference from ambient light and offers amazing indifference to the color of object being detected. Detecting a black wall in full sunlight is now possible.\n  \u003c\/p\u003e\n \u003c\/div\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Documents\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cp\u003e\n  Please visit our\n  \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Seeeduino_v2.21\"\u003e\n  \u003c\/a\u003e\n  \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Twig_-_80cm_Infrared_Proximity_Sensor_v0.9\"\u003e\n   wiki page\n  \u003c\/a\u003e\n  for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials\n \u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578070315389,"sku":"SEN39046P","price":9.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-proximity__03140.1417028026.1280.1280.jpg?v=1753829155"},{"product_id":"grove-temperature-humidity-sensor-pro-am2302","title":"Grove - Temperature \u0026 Humidity Sensor Pro (AM2302)","description":"\u003cp\u003e\n This product is a high accuracy temperature and humidity sensor used in home conditions. It consists of a capacitive sensor element used for measuring relative humidity and a negative temperature coefficient (NTC) thermistor used for measuring temperature. Every sensor was calibrated in an accurate humidity room. Small dimension, ultra low power consumption, more than 20m's signal transmission distance make it a good selection for various application environment. Different from Twig - Temp\u0026amp;Humi Sensor v0.9b, the accuracy of this module can gets up to 0.3 degree in temperature and 2% in relative humidity.\n\u003c\/p\u003e\n\u003cp\u003e\n For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through\n \u003ca href=\"http:\/\/www.seeedstudio.com\/document\/pdf\/Preface.pdf\" rel=\"noopener\" target=\"_blank\"\u003e\n  Preface - Getting Started\n \u003c\/a\u003e\n and\n \u003ca href=\"http:\/\/www.seeedstudio.com\/document\/pdf\/Introduction%20to%20Grove.pdf\" rel=\"noopener\" target=\"_blank\"\u003e\n  Introduction to Grove\n \u003c\/a\u003e\n before your using of the product.\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Dimensions: 40mm x 20mm x 11mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 10g\n \u003c\/li\u003e\n \u003cli\u003e\n  Battery excluded\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Resources:\n\u003c\/h2\u003e\n\u003cul class=\"doc-list\"\u003e\n \u003cli class=\"doc-item mt10\"\u003e\n  \u003ca class=\"hy-link\" href=\"https:\/\/github.com\/SeeedDocument\/Grove-Temperature_and_Humidity_Sensor_Pro\/raw\/master\/res\/AM2302.pdf\" rel=\"noopener\" target=\"_blank\"\u003e\n   AM2302.pdf\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli class=\"doc-item mt10\"\u003e\n  \u003ca class=\"hy-link\" href=\"https:\/\/github.com\/SeeedDocument\/Grove-Temperature_and_Humidity_Sensor_Pro\/raw\/master\/res\/Temp_Humi_Pro_eagle_files.zip\" rel=\"noopener\" target=\"_blank\"\u003e\n   Temp Humi Pro eagle files.zip\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578073821565,"sku":"SEN51035P","price":8.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-Grove_-_TemperatureHumidity_Sensor_Pro_AM2302-1__65425.1525800715.1280.1280.jpg?v=1753829181"},{"product_id":"grove-air-quality-sensor-v1-4","title":"Grove - Air Quality Sensor v1.3","description":"\u003cdiv\u003e\n This is the new and improved v1.3 of the Grove - Air Quality Sensor. The sensor is designed for indoor air quality testing. The main gases that the sensor can detect are: carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with 5V and 3.3V power supply.\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003cdiv\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Features\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cdiv\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Low power consumption\n  \u003c\/li\u003e\n  \u003cli\u003e\n   High sensitivity\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Tiny outline\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Responsive to a wide scope of target gases\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Cost efficient\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Durable\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Compatible with 5V and 3.3V\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Application Ideas\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cdiv\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Automatic air ventilation\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Indoor air quality detector\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Documents\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cspan\u003e\n   Please visit the\n  \u003c\/span\u003e\n  \u003ca href=\"http:\/\/www.seeedstudio.com\/wiki\/Grove_-_Air_Quality_Sensor_v1.3\"\u003e\n   wiki\n  \u003c\/a\u003e\n  \u003cspan\u003e\n   page for more information about this product. If you can help us improve the documents by adding more information, demo code or tutorials, your help would be appreciated. For technical support, please post your questions to the\n  \u003c\/span\u003e\n  \u003ca href=\"http:\/\/www.seeedstudio.com\/forum\/\"\u003e\n   forum\n  \u003c\/a\u003e\n  \u003cspan\u003e\n   .\n  \u003c\/span\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578075853181,"sku":"SEN01111P","price":5.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-p1100141__14301.1417028038.1280.1280.jpg?v=1753829194"},{"product_id":"grove-3-axis-digital-accelerometer-1-5g-1","title":"Grove - 3-Axis Digital Accelerometer(±1.5g)","description":"\u003cp\u003e\n \u003cspan\u003e\n  This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C. This Module can be used for sensing data changes, product orientation, and gesture detection through an interrupt pin (INT).It is a very low power, low profile capacitive MEMS sensor.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Features\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Grove compatible interface\n   \u003c\/li\u003e\n   \u003cli\u003e\n    3 axis motion\/orientation sensing\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Digital Output (I2C)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    10,000 g shock survival\n   \u003c\/li\u003e\n   \u003cli\u003e\n    RoHS\/WEEE lead-free compliant\n   \u003c\/li\u003e\n   \u003cli\u003e\n    5VDC input\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/div\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Application Ideas\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Motion Detection of Robot\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Mobile Phone\/ PMP\/PDA: Orientation Detection (Portrait\/Landscape),Image Stability, Text Scroll, Motion Dialing, Tap to Mute\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003chr\u003e\n  \u003cp\u003e\n   \u003cspan style=\"font-size: medium\"\u003e\n    \u003cstrong\u003e\n     Documents\n    \u003c\/strong\u003e\n   \u003c\/span\u003e\n  \u003c\/p\u003e\n \u003c\/div\u003e\n \u003cdiv\u003e\n  \u003cstrong\u003e\n  \u003c\/strong\u003e\n \u003c\/div\u003e\n \u003cdiv\u003e\n  Please visit our\n  \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Seeeduino_v2.21\"\u003e\n  \u003c\/a\u003e\n  \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Twig_-_I2C_3-axis_Accelerometer\"\u003e\n   wiki page\n  \u003c\/a\u003e\n  for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578076213629,"sku":"SEN21853P","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-3axi_accelerometer__98198.1417028041.1280.1280.jpg?v=1753829208"},{"product_id":"grove-light-sensor-v1-3","title":"Grove - Light Sensor v1.2","description":"\u003cp\u003e\n As an updated version of Grove - Light Sensor 1.0, the Grove - Light Sensor v1.2 is also aimed at measuring light levels, however with higher reliability and sensibility. It is an analog module and output various electrical signals which can be converted to different ranges (It depends on the Analog-to-Digital-Converter on your controller board. For example, it can output 0-255 for an 8-bit ADC). It integrates a high-sensitive and reliable phototriode, and just like other grove modules, it is interfaced with Grove port which can save you a lot work in wiring.\n\u003c\/p\u003e\n\u003ch1\u003e\n Features\n\u003c\/h1\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n \u003cli\u003e\n  Easy to use since it is interfaced with Grove port.\n \u003c\/li\u003e\n \u003cli\u003e\n  High reliability and sensibility.\n \u003c\/li\u003e\n \u003cli\u003e\n  Small footprint\n \u003c\/li\u003e\n \u003cli\u003e\n  Recognize wider spectrum.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n Specification\n\u003c\/h1\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n \u003cli\u003e\n  Operating voltage(V): 3-5 V\n \u003c\/li\u003e\n \u003cli\u003e\n  Operating current(mA): 0.5-3 mA\n \u003c\/li\u003e\n \u003cli\u003e\n  Response time: 20 ~ 30 milliseconds\n \u003c\/li\u003e\n \u003cli\u003e\n  Peak Wavelength: 540 nm\n \u003c\/li\u003e\n \u003cli\u003e\n  Phototriode: GL5528(datasheet)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n Documents\n\u003c\/h1\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n \u003cli\u003e\n  ŸFor libraries and documents, please visit our\n  \u003ca href=\"http:\/\/wiki.seeed.cc\/Grove-Light_Sensor\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n   Wiki\n  \u003c\/a\u003e\n  page.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578076311933,"sku":"SEN11302P","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/light-sensor.jpg?v=1753829222"},{"product_id":"grove-water-sensor-1","title":"Grove - Water Sensor","description":"\u003cp\u003e\n \u003cspan\u003e\n  This water sensor module is part of the Grove (Twig) system. This sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sens traces. The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace. Believe it or not this circuit will work with the digital I\/O pins of your Arduino or you can use it with the analog pins to detect the amount of water induced contact between the grounded and sensor traces.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Features\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Grove compatible interface\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Low power consumption\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2.0cm x 2.0cm twig module\n   \u003c\/li\u003e\n   \u003cli\u003e\n    High sensitivity\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cdiv\u003e\n   \u003chr\u003e\n   \u003ch3\u003e\n    \u003cstrong\u003e\n     Applications Ideas\n    \u003c\/strong\u003e\n   \u003c\/h3\u003e\n   \u003cdiv\u003e\n    \u003cul\u003e\n     \u003cli\u003e\n      Rainfall detecting\n     \u003c\/li\u003e\n     \u003cli\u003e\n      Liquid leakage\n     \u003c\/li\u003e\n     \u003cli\u003e\n      Tank overflow detector\n     \u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cdiv\u003e\n     \u003cdiv\u003e\n      \u003chr\u003e\n      \u003ch3\u003e\n       \u003cspan\u003e\n        Documents\n       \u003c\/span\u003e\n      \u003c\/h3\u003e\n      \u003cp\u003e\n       Please visit our\n       \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Seeeduino_v2.21\"\u003e\n       \u003c\/a\u003e\n       \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Twig_-_Water_Sensor\"\u003e\n        wiki page\n       \u003c\/a\u003e\n       for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials\n      \u003c\/p\u003e\n     \u003c\/div\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578076475773,"sku":"SEN11304P","price":2.63,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-p3202385__66995.1417028054.1280.1280.jpg?v=1753829235"},{"product_id":"grove-125khz-rfid-reader-1","title":"Grove - 125KHz RFID Reader","description":"\u003cp\u003e\n \u003cspan\u003e\n  The Grove-125KHz RFID Reader is a module used to read uem4100 RFID card information with two output formats: Uart and Wiegand. It has a sensitivity with maximum 7cm sensing distance.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Features\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Selectable output format: Uart or Wiegand.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    4Pins Electronic Brick Interface\n   \u003c\/li\u003e\n   \u003cli\u003e\n    High Sensitivity\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cdiv\u003e\n   \u003chr\u003e\n   \u003ch3\u003e\n    \u003cstrong\u003e\n     Documents\n    \u003c\/strong\u003e\n   \u003c\/h3\u003e\n   \u003cdiv\u003e\n    Please visit our\n    \u003ca href=\"http:\/\/www.seeedstudio.com\/wiki\/Grove_-_125KHz_RFID_Reader\"\u003e\n     wiki page\n    \u003c\/a\u003e\n    for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials\n   \u003c\/div\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578079555965,"sku":"SEN11425P","price":9.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-gr125k_01__30406.1417028066.1280.1280.jpg?v=1753829262"},{"product_id":"grove-sound-sensor-1","title":"Grove - Sound Sensor","description":"\u003cp\u003e\n \u003cspan\u003e\n  The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted by the potentiometer.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Features\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Grove compatible interface\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Wide supply voltage range: 4V-12V\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Low quiescent current drain: 4mA\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2.0cm x 2.0cm twig module\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Minimum external parts\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Gain adjustable\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/div\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Applications Ideas\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Simple microphone\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Sound detection\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cdiv\u003e\n   \u003chr\u003e\n   \u003ch3\u003e\n    \u003cspan\u003e\n     Documents\n    \u003c\/span\u003e\n   \u003c\/h3\u003e\n   \u003cp\u003e\n    Please visit our\n    \u003ca href=\"http:\/\/garden.seeedstudio.com\/index.php?title=Twig_-_Sound_Sensor\"\u003e\n     wiki page\n    \u003c\/a\u003e\n    for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials\n   \u003c\/p\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578080833917,"sku":"SEN12945P","price":4.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-p2100722__24743.1417028071.1280.1280.jpg?v=1753829276"},{"product_id":"grove-touch-sensor","title":"Grove - Touch Sensor","description":"\u003cp\u003e\n This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223-B touch detector IC It measures the capacitance of a metallic pad. It can detect the change in capacitance when a finger is near it. This is the same technology used in the iPhone touch screen. So you can place the metallic pad under a non-metallic surface such as a plastic or glass sheet and it will still work as a button. This may be useful for projects that need to be waterproof. You can also make a secret button by placing it inconspicuously behind a smooth surface. For instance you could place them under a nonmetallic card table and by casually pressing the right location on a tabletop surface you could mysteriously control your DIY project.\n\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Features\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cdiv\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Grove compatible interface\n  \u003c\/li\u003e\n  \u003cli\u003e\n   2.0-5.5V DC supply\n  \u003c\/li\u003e\n  \u003cli\u003e\n   response time max about 60mS at fast mode, 220mS at low power mode @VDD=3V\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Low power consumption\n  \u003c\/li\u003e\n  \u003cli\u003e\n   2.0cm x 2.0cm twig module\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Power indicator led\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Applications Ideas\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cdiv\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Inconspicuous button\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Water proofed electric product\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Button key replacement\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cdiv\u003e\n  \u003chr\u003e\n  \u003ch3\u003e\n   \u003cstrong\u003e\n    Documents\n   \u003c\/strong\u003e\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   Please visit our\n   \u003ca href=\"http:\/\/www.seeedstudio.com\/wiki\/index.php?title=Twig_-_Touch_Sensor\"\u003e\n   \u003c\/a\u003e\n   \u003ca href=\"http:\/\/www.seeedstudio.com\/wiki\/index.php?title=Twig_-_Touch_Sensor\"\u003e\n    wiki\n   \u003c\/a\u003e\n   page for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials.\n  \u003c\/p\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578090303869,"sku":"SEN11303P","price":3.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/httpsstatics3.seeedstudio.comseeedfile2018-07bazaar881144_3.jpg?v=1753829432"},{"product_id":"grove-hall-sensor-1","title":"Grove - Hall Sensor","description":"\u003cdiv\u003e\n \u003cspan\u003e\n  The Hall Sensor measures the Hall Effect, which is a production of a voltage difference across an electrical conductor, transverse to an electric current in the conductor as well as a magnetic field perpendicular to the current. The output of the continuous-time switch Hall sensor on this Twig switches low and turns on when a magnetic field (south polarity) perpendicular to the Hall sensor exceeds the BOP threshold, and it switches high and turn on when the magnetic field disappears.\n \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Features\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Grove Compatible\n   \u003c\/li\u003e\n   \u003cli\u003e\n    \u003cspan\u003e\n     400ns transition period for rise and fall.\n    \u003c\/span\u003e\n   \u003c\/li\u003e\n   \u003cli\u003e\n    \u003cspan\u003e\n     Continuous-time hall effect sensor\n    \u003c\/span\u003e\n   \u003c\/li\u003e\n   \u003cli\u003e\n    \u003cspan\u003e\n     Size:\n     \u003cspan\u003e\n      20mm by 24mm\n     \u003c\/span\u003e\n    \u003c\/span\u003e\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003chr\u003e\n  \u003ch3\u003e\n   \u003cstrong\u003e\n    Application Ideas\n   \u003c\/strong\u003e\n  \u003c\/h3\u003e\n  \u003cdiv\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     RPM meter.\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Simple dc motor.\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv\u003e\n   \u003chr\u003e\n   \u003ch3\u003e\n    \u003cstrong\u003e\n     Documents\n    \u003c\/strong\u003e\n   \u003c\/h3\u003e\n   \u003cdiv\u003e\n    \u003cspan\u003e\n     Please visit our\n    \u003c\/span\u003e\n    \u003ca href=\"http:\/\/www.seeedstudio.com\/wiki\/Grove_-_Hall_Sensor\"\u003e\n     wiki page\n    \u003c\/a\u003e\n    \u003cspan\u003e\n     for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials\n    \u003c\/span\u003e\n   \u003c\/div\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578097774973,"sku":"SEN14034P","price":5.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-hall_sensor__67343.1417028330.1280.1280.jpg?v=1753829527"},{"product_id":"rfid-tag-combo-125khz-1","title":"RFID tag combo (125khz)","description":"\u003cdiv\u003e\n 125Khz, EM4100 standard.\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003cbr\u003e\n Combo includes:\n \u003cul\u003e\n  \u003cli\u003e\n   Different color key tag * 3\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Blank card with Serial Number * 2\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n Compatible with RDM630 module.\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Specification\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cdiv\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Material: ABS\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Type: Contactless Read \u0026amp; Write\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Operating Frequency: 125KHz\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Compliance: EM4100\/EM42100\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Different color key tag * 3\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Blank card with Serial Number * 2\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Compatible with RDM630 module.\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n \u003chr\u003e\n \u003ch3\u003e\n  \u003cstrong\u003e\n   Documents\n  \u003c\/strong\u003e\n \u003c\/h3\u003e\n \u003cdiv\u003e\n  \u003cspan\u003e\n   Please visit our\n  \u003c\/span\u003e\n  \u003ca href=\"http:\/\/www.seeedstudio.com\/wiki\/RFID_tag_combo_(125khz)_-_5_pcs\"\u003e\n   wiki\n  \u003c\/a\u003e\n  \u003cspan\u003e\n   page for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials\n  \u003c\/span\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578100527485,"sku":"RFR103B2B","price":2.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Screenshot2026-02-01232920.png?v=1769959899"},{"product_id":"grove-piezo-vibration-sensor-1","title":"Grove - Piezo Vibration Sensor","description":"\u003cp\u003e\n The Grove - Piezo Vibration Sensor is suitable for measurements of flexibility, vibration, impact and touch. The module is based on PZT film sensor LDT0-028. When the sensor moves back and forth, a certain voltage will be created by the voltage comparator inside of it.\n\u003c\/p\u003e\n\u003cp\u003e\n Therefore, outputs high \u0026amp; low levels. In spite of the fact that it has a high receptivity for strong impacts, a wide dynamic range (0.001Hz~1000MHz) also guarantees an excellent measuring performance. Finally, you can adjust its sensitivity by adjusting the potentiometer with a screw.\n\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n Features\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Standard grove socket\n \u003c\/li\u003e\n \u003cli\u003e\n  Wide dynamic range 0.001Hz ~1000MHz\n \u003c\/li\u003e\n \u003cli\u003e\n  Adjustable sensitivity\n \u003c\/li\u003e\n \u003cli\u003e\n  High receptivity for strong impact\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\n Applications\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Vibration Sensing in Washing Machine\n \u003c\/li\u003e\n \u003cli\u003e\n  Low Power Wakeup Switch\n \u003c\/li\u003e\n \u003cli\u003e\n  Low Cost Vibration Sensing\n \u003c\/li\u003e\n \u003cli\u003e\n  Car Alarms\n \u003c\/li\u003e\n \u003cli\u003e\n  Body Movement\n \u003c\/li\u003e\n \u003cli\u003e\n  Security Systems\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"value certification-info-tech col2s-left\"\u003e\n \u003ch2\u003e\n  Technical details\n \u003c\/h2\u003e\n \u003ctable border=\"0\"\u003e\n  \u003ctbody\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"name\"\u003e\n     Dimensions\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     40mm x20mm x11.5mm\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"name\"\u003e\n     Weight\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     G.W 12g\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"name\"\u003e\n     Battery\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Exclude\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"value certification-info-part col2s-left\"\u003e\n \u003ch2\u003e\n  Part List\n \u003c\/h2\u003e\n \u003ctable border=\"0\"\u003e\n  \u003ctbody\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"name\"\u003e\n     Grove - Piezo Vibration Sensor\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"value certification-info-eccn col2s-left\"\u003e\n \u003ch2\u003e\n  ECCN\/HTS\n \u003c\/h2\u003e\n \u003ctable class=\"table\"\u003e\n  \u003ctbody\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"name\"\u003e\n     ECCN\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     EAR99\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"name\"\u003e\n     HSCODE\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     9031900090\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"name\"\u003e\n     USHSCODE\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     90230000\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"name\"\u003e\n     UPC\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     841454107842\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n \u003c\/table\u003e\n \u003ctable class=\"table\"\u003e\n  \u003ctbody\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"name\"\u003e\n     ROHS\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578107310461,"sku":"SEN04031P","price":4.74,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Grove-Piezo-vibration-4.jpg?v=1753829669"},{"product_id":"grove-flame-sensor-1","title":"Grove - Flame Sensor","description":"\u003cp\u003e\n The Grove - Flame Sensor can be used to detect fire source or other light sources of the wavelength in the range of 760nm - 1100 nm. It is based on the YG1006 sensor which is a high speed and high sensitive NPN silicon phototransistor. Due to its black epoxy, the sensor is sensitive to infrared radiation. In fire fighting robot game, The sensor plays a very important role, it can be used as a robot eyes to find the fire source.\n\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n Features\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Grove Interface\n \u003c\/li\u003e\n \u003cli\u003e\n  High Photo Sensitivity\n \u003c\/li\u003e\n \u003cli\u003e\n  Fast Response Time\n \u003c\/li\u003e\n \u003cli\u003e\n  Easy to use\n \u003c\/li\u003e\n \u003cli\u003e\n  Sensitivity can adjustable\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\n Documents\n\u003c\/h3\u003e\n\u003cp\u003e\n Please visit our\n \u003ca href=\"http:\/\/www.seeedstudio.com\/wiki\/Grove_-_Flame_Sensor\"\u003e\n  wiki page\n \u003c\/a\u003e\n for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials.\n\u003c\/p\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578107474301,"sku":"SEN05082P","price":4.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-560FE3DD5DD44D3DCAA7B4E686EC1C04__81198.1417028741.1280.1280.jpg?v=1753829684"},{"product_id":"umt-pixhawk-airspeed-sensor-kit","title":"UMT Pixhawk Airspeed Sensor Kit","description":"\u003cp\u003e\n This is the pixhawk differential airspeed sensor kit which is a high resolution, low offset digital pressure sensor, making this a very accurate airspeed sensor for your pixhawk\/px4 fixed wing autopilot.  This airspeed sensor does not suffer drom noise caused by long cables, or from the offsets caused by the ratio-metric outputs of the older analog APM airspeed sensor.\n\u003c\/p\u003e\n\u003cp\u003e\n This airspeed sensor is uses the Measurement Specialties 4525DO sensor, which is cabable of measuring speeds up to 100m\/s (223 mp\/h, or 360km\/h).  The measurement resolution is 0.84 Pa.  The pressure data is delivered at 14 bit from a 24bit delta-sigma ADC.  A built in temperare sensor allows calculation of the true airspeed from the indicated airspeed using the MS5611 static pressure sensor on the Pixhawk\/ PX4.    The new digital airspeed sensor is not influenced by the heat of nearby processing components, it is much closer to the air temperature than with previous analog sensor setups.\n\u003c\/p\u003e\n\u003cp\u003e\n This airspeed sensor is supported on all Pixhawk and PX4 autopilot generation boards, this kit comes with M3 \/ 6-32 mounting holes.  You dont need to use an airpseed sensor if you are flying a multicopter, as its only used with the arduplane fixed wing code.\n\u003c\/p\u003e\n\u003cp\u003e\n The airpseed sensor kit connects to the I2C hub on pixhawk 1 and pixhawk 2 boards.  However on pixhawk 2 boards you will need a JST-GH connector as this unit ships with a connector for pixhawk v1 boards only.\n\u003c\/p\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":56578123497853,"sku":"Pixhawk-Airspeed\\-Sensor","price":38.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-Pixhawk-Digital-Airspeed-sensor__36824.1462372478.1280.1280.webp?v=1753829893"},{"product_id":"benewake-tf03-lidar-led-rangefinder-ip65-100-m-sl4","title":"Benewake TF03 LIDAR LED Rangefinder IP65 (100 m)","description":"\u003cp\u003eWe know you've been tirelessly trawling the internet for a piece of technology that can answer your needs. Meet your new favourite gadget: the Benewake TF03 LIDAR LED Rangefinder. It's not just another single-point long-distance LIDAR; it's your high-performance ally designed specifically for industrial UAV, intelligent transportation systems, automotive applications, and much more.\u003c\/p\u003e\n\u003cp\u003eThis bad boy has an operating range of up to 180m! Yes, you read that right - a LIDAR that can see further than the average owl in flight. It's the Usain Bolt of LIDARs, boasting a high-speed measurement capability of 10KHz. And guess what? It's IP65 certified; it's not afraid to get a little wet.\u003c\/p\u003e\n\u003cp\u003eLet's kick things up a notch. This mighty mite has a body tougher than a two-dollar steak, with an IP67 rating. Perfect for those who like their tech sturdy. And with its sleek dimensions of 44mm x 43mm x 32mm and a lightweight design tipping the scales at just 77g, it's the secret sauce in your recipe for uncluttered design.\u003c\/p\u003e\n\u003cp\u003eGot sunlight? The Benewake TF03 LIDAR LED Rangefinder laughs in the face of glare with a compensation algorithm that works splendidly even in high-ambient light situations. It's like a pair of top-notch sunglasses for your project. Unleash your creativity and get your hands on the Benewake TF03 LIDAR LED Rangefinder. It's the partner your projects have been yearning for, with an array of measurement modes and parameters for custom configurations to meet your specific ranging needs.\u003c\/p\u003e\n\u003ch2\u003eProduct Highlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLong-distance range of up to 180m.\u003c\/li\u003e\n\u003cli\u003eHigh-speed measurement frequency of up to 10KHz.\u003c\/li\u003e\n\u003cli\u003eSuper durable with an IP67 rating.\u003c\/li\u003e\n\u003cli\u003eCompact and lightweight at 77g.\u003c\/li\u003e\n\u003cli\u003eUnmatched outdoor light compensation algorithm.\u003c\/li\u003e\n\u003cli\u003eMultiple interfaces and measurement models for enhanced compatibility and custom configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSo, whether you're building the next revolutionary drone or optimising a smart transportation system, your search for the perfect LIDAR ends here. Let the Benewake TF03 LIDAR LED Rangefinder be the ace up your engineering sleeve!\u003c\/p\u003e\n\u003cp\u003eTo maximize different requirements in different applications and scenarios, TF03 can be compatible with a variety of communication interfaces, featuring IP67 high-intensity bodywork and the measurement frequency as high as 10 KHz. It not only has powerful performance and rich interfaces but also is small in volume, so that it could be integrated more easily in applications.\u003c\/p\u003e\n\u003cp\u003eIn addition, TF03 contains a compensation algorithm targeting outdoor highlight environment, so that it could still work normally in highlight environment. Besides, it also has a variety of measurement models and parameters for custom configurations, so as to meet the ranging needs of different customers.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e Performance parameters \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: 100m (max 180m)\u003c\/li\u003e\n\u003cli\u003eNon-detection zone: 10cm\u003c\/li\u003e\n\u003cli\u003eDistance resolution: 1cm\u003c\/li\u003e\n\u003cli\u003eAccuracy: ±10cm (less than 10m), 1% (more than 10m)\u003c\/li\u003e\n\u003cli\u003eRefresh rate: 1Hz-1,000Hz (default 100Hz)\u003c\/li\u003e\n\u003cli\u003eAmbient light immunity: 100Klux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Optical parameters \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWavelength of Light Source: 905nm\u003c\/li\u003e\n\u003cli\u003eFOV: 0.5°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Ambient data \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperation Temperature: -25~60\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Communication and Interface \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eForm of Output Data: Hexadecimal distance value; Character string;\u003c\/li\u003e\n\u003cli\u003eCommunication Interface: UART; CAN\u003c\/li\u003e\n\u003cli\u003eMechanical\/Electrical parameters\u003c\/li\u003e\n\u003cli\u003eSupply Voltage: DC 5V (=200mA)\u003c\/li\u003e\n\u003cli\u003ePower Consumption: 0.9W\u003c\/li\u003e\n\u003cli\u003eWeight: 77g\u003c\/li\u003e\n\u003cli\u003eSize: 44mm x 43mm x 32mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/wp-content\/uploads\/2019\/01\/benewake-tf03-lidar-Datasheet.pdf\"\u003e Benewake TF03 Datasheet \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/wp-content\/uploads\/2019\/01\/benewake-tf03-lidar-Manual.pdf\"\u003e Benewake TF03 Manual \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benewake","offers":[{"title":"Default Title","offer_id":56578175467901,"sku":"BW-TF03","price":74.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1_c9dc6728-91f5-4f25-ba89-86e4ad3accdd.jpg?v=1770296147"},{"product_id":"sparkfun-qwiic-mini-tof-imager-vl53l5cx","title":"SparkFun Qwiic Mini ToF Imager - VL53L5CX","description":"\u003cp\u003e\n The SparkFun Qwiic Mini ToF Imager is a state of the art, 64 pixel Time-of-Flight (ToF) four meter ranging sensor built around the VL53L5CX from STMicroelectronics. This Mini version has a footprint that is half the size (0.5in. x 1in.) of our standard Qwiic VL53L5CX board. Additionally, we moved the Qwiic connectors to the back of the board in a vertical orientation. These design changes favor mounting applications where the VL53L5CX sensor faces outward from an enclosure or chassis, and keeps your Qwiic cables cleanly tucked away.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-568059\" height=\"648\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/VL53L5CX_Depth_Map_Example_05ce4b45-ea09-4643-98c2-9df2a4afbff5.gif?v=1754236563\" width=\"692\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Multizone ranging output with either 4x4 or 8x8 separate zones\n \u003c\/li\u003e\n \u003cli\u003e\n  Autonomous Low-power mode with interrupt programmable threshold to wake up the host\n \u003c\/li\u003e\n \u003cli\u003e\n  Up to 400cm ranging\n \u003c\/li\u003e\n \u003cli\u003e\n  60Hz frame rate capability\n \u003c\/li\u003e\n \u003cli\u003e\n  Emitter: 940nm invisible light vertical cavity surface emitting laser (VCSEL) and integrated analog driver\n \u003c\/li\u003e\n \u003cli\u003e\n  63° diagonal square FoV using diffractive optical elements (DOE) on both transmitter and receiver\n \u003c\/li\u003e\n \u003cli\u003e\n  Operating Voltage: 3.3V\n \u003c\/li\u003e\n \u003cli\u003e\n  I2C Address: 0x52\n \u003c\/li\u003e\n \u003cli\u003e\n  2x Vertical Qwiic Connectors\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions - 0.5in. x 1in.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n The VL53L5CX chip integrates a SPAD array, physical infrared filters, and diffractive optical elements (DOE) to achieve the best ranging performance in various ambient lighting conditions with a range of cover glass materials. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out some 0.1in.-spaced pins in case you prefer to use a breadboard.\n\u003c\/p\u003e\n\u003cp\u003e\n Multi zone distance measurements up to 4000mm are possible across all 64 zones with a wide 63° diagonal field-of-view which can be read up to 15Hz. Thanks to ST Histogram patented algorithms, the VL53L5CX is able to detect different objects within the FoV. The Histogram also provides immunity to cover glass crosstalk beyond 60cm.\n\u003c\/p\u003e\n\u003cp\u003e\n The Qwiic Mini ToF Imager is ideal for 3D room mapping, obstacle detection for robotics, gesture recognition, IoT, laser-assisted autofocus, and AR\/VR enhancement; the Qwiic connector on this sensor makes integration easy.\n\u003c\/p\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/7\/b\/6\/0\/9\/19013-Qwiic-ToF-Imager_-VL53L5CX-Mini_Schematic.pdf\"\u003e\n   Schematic\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/3\/5\/3\/7\/2\/19013-Qwiic-ToF-Imager_-VL53L5CX-Mini_EagleFiles.zip\"\u003e\n   Eagle Files\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/1\/1\/8\/5\/1\/19013-Qwiic-ToF-Imager_-VL53L5CX-Mini_BoardDimensions.png\"\u003e\n   Board Dimensions\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/2002\"\u003e\n   Hookup Guide\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/6\/e\/3\/0\/6\/vl53l5cx-datasheet.pdf\"\u003e\n   Datasheet\n  \u003c\/a\u003e\n  (VL53L5CX)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003e\n   Qwiic Info Page\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_VL53L5CX_Arduino_Library\"\u003e\n   Arduino Library\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_Qwiic_ToF_Imager_VL53L5CX-Mini\"\u003e\n   GitHub Hardware Repo\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":56578181792125,"sku":"SEN-19013","price":25.09,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/19013-SparkFun_Qwiic_Mini_ToF_Imager_-_VL53L5CX-01.jpg?v=1753830769"},{"product_id":"matek-digital-airspeed-sensor-aspd-4525","title":"Matek Digital Airspeed Sensor ASPD-4525","description":"\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Board Supply voltage: 4~6V DC\n \u003c\/li\u003e\n \u003cli\u003e\n  Sensor: MS4525\n \u003c\/li\u003e\n \u003cli\u003e\n  Working current: 5mA\n \u003c\/li\u003e\n \u003cli\u003e\n  Output: I2C (SCL \u0026amp; SDA)\n \u003c\/li\u003e\n \u003cli\u003e\n  Pressure Ranges: 1 PSI (6.89kPa)\n \u003c\/li\u003e\n \u003cli\u003e\n  Maximum Pressure: 20 PSI (137.9kPa)\n \u003c\/li\u003e\n \u003cli\u003e\n  Operating Temperature: -40°C ~ 125°C\n \u003c\/li\u003e\n \u003cli\u003e\n  Accuracy: ±0.25% SPAN\n \u003c\/li\u003e\n \u003cli\u003e\n  Red LED:  power indicator\n \u003c\/li\u003e\n \u003cli\u003e\n  JST-GH sequence: 5V, SCL, SDA, GND\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 3.5g (sensor board)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  ASPD-4525 Sensor Board.\n \u003c\/li\u003e\n \u003cli\u003e\n  JST-GH to JST-GH 20cm silicon cable.\n \u003c\/li\u003e\n \u003cli\u003e\n  Pitot Tube.\n \u003c\/li\u003e\n \u003cli\u003e\n  Clear silicon tubing  40cm\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Wiring \/ Pinout\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  5V to FC 4~6V\n \u003c\/li\u003e\n \u003cli\u003e\n  SCL to FC I2C_SCL\n \u003c\/li\u003e\n \u003cli\u003e\n  SDA to FC I2C_SDA\n \u003c\/li\u003e\n \u003cli\u003e\n  G to FC GND\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578182414717,"sku":"F2F-C13-D7C","price":38.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/ASPD-4525_0.webp?v=1753830771"},{"product_id":"marvelmind-dsp-3d-indoor-navigation-positioning-system-non-inverse-architecture","title":"Marvelmind DSP 3D Indoor Navigation Positioning System (Non Inverse Architecture)","description":"\u003cp\u003e\n The\n \u003cstrong\u003e\n  Marvelmind DSP Indoor Navigation Positioning System\n \u003c\/strong\u003e\n is an off-the-shelf indoor navigation system designed to provide precise (±2cm) location data to autonomous robots, vehicles (AGV), drones and forklifts. It can also be used to track other objects that the mobile beacon is installed upon, for example, virtual reality (VR) systems, helmets for construction workers or miners, jackets, etc.\n\u003c\/p\u003e\n\u003cp\u003e\n The navigation system is based on stationary ultrasonic beacons that are united by radio interface in a license-free band (915MHz \/ 868Mhz). The location of the mobile beacon is calculated based on the propagation delay of an ultrasonic signal (Time-Of-Flight or TOF) to a set of stationary ultrasonic beacons using trilateration.\n\u003c\/p\u003e\n\u003ch3 class=\"about-headers\"\u003e\n Included\n\u003c\/h3\u003e\n\u003cdiv class=\"aboutContent clearfix\"\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   4 x DSP Beacons 915\/868MHz as stationary beacons (Beacon Mini RX)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   1 x Beacon HW v4.9 with IMU 915\/868 MHz as mobile beacon\n  \u003c\/li\u003e\n  \u003cli\u003e\n   1 x Modem HW v4.9 915\/868 MHz\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"about-headers\"\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cdiv class=\"aboutContent clearfix\"\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Distance between beacons\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Reach up to 50 meters in lab conditions\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Recommended distance is 30 meters (Transducer4 of Beacon HW v4.9 looking straight at Beacon DSP HW v5.xx)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Range of stable tracking of DSP beacon + Beacon HW v4.9 is 20-50% bigger than the range of Beacon HW v4.9 + Beacon HW v4.9 in the same conditions\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Coverage area\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Reach up to 1000 m2 with the Starter Set configurations\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Coverage for larger territories is similar to cellular networks\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Location precision\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Absolute: 1-3% of the distance to the beacons\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Differential precision: ±2 cm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Differential precision is on par or better than in the Beacon HW v4.9, partially, because the sensor is a point - not as spread sensors of HW v4.9; and, partially, because of higher processing power and more advanced algorithms of the DSP beacon\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Location update rate\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Non-Inverse Architecture:\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   0.05-25Hz\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Can be set manually or in automatic mode\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Depends on the distance between the mobile and stationary beacons (shorter distance — higher update rate)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Depends on the number of mobile beacons: for example, an update rate of 25Hz for 1 mobile beacon will result in an update rate of 25Hz\/2 for 2 mobile beacons, and 25Hz\/3 - for 3 mobile beacons, etc. - TDMA approach\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Depends on the radio interface profile (500kbps vs. 38kbps)\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Inverse Architecture:\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   0.05-25Hz. With IMU fusion enabled - up to 100Hz\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Can be set manually or in automatic mode\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Depends on the distance between the mobile and stationary beacons (shorter distance — higher update rate)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Doesn't depend on the number of mobile beacons - all of them are receiving\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Depends on the radio interface profile (500kbps vs. 38kbps)\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Power supply and battery lifetime\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Internal:\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   LiPo battery 750mAh\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Battery lifetime totally depends on usage\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Stationary beacon with 8Hz update rate =\u0026gt; up to 30h\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Stationary beacon with 1Hz update rate =\u0026gt; 1 week\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Future power saving features may increase battery life to 1year and more\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   External:\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   microUSB - recommended for permanent use\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Weight\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   25g (board + battery + plastic housing)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   9g (board only)\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  Manufacturer Product Code: 4680038530055\n \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"Marvelmind Robotics","offers":[{"title":"Default Title","offer_id":56578185036157,"sku":"387-392-7D2","price":199.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/marvelmind-DSP-kit-1-scaled.jpg?v=1753830791"},{"product_id":"sparkfun-distance-sensor-breakout-4-meter-vl53l1x-qwiic","title":"SparkFun Distance Sensor Breakout - 4 Meter, VL53L1X (Qwiic)","description":"\u003cp\u003e\n The VL53L1X from STMicroelectronics uses a VCSEL (Vertical Cavity Surface Emitting Laser) to emit an Infrared laser to time the reflection to the target. That means that you will be able to measure the distance to an object from 40mm to 4m away with millimeter resolution! To make it even easier to get your readings, all communication is enacted exclusively via I\n \u003csup\u003e\n  2\n \u003c\/sup\u003e\n C, utilizing our handy Qwiic system so no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1\"-spaced pins in case you prefer to use a breadboard.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/SparkFun_Distance_Sensor_Breakout_-_4_Meter__VL53L1X__Qwiic.gif?v=1754236555\"\u003e\n  \u003cimg alt=\"\" class=\"alignnone size-full wp-image-555479\" height=\"410\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/SparkFun_Distance_Sensor_Breakout_-_4_Meter__VL53L1X__Qwiic.gif?v=1754236555\" width=\"728\"\u003e\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Operating Voltage: 2.6V-3.5V\n \u003c\/li\u003e\n \u003cli\u003e\n  Power Consumption: 20 mW @10Hz\n \u003c\/li\u003e\n \u003cli\u003e\n  Measurement Range: ~40mm to 4,000mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Resolution: +\/-1mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Light Source: Class 1 940nm VCSEL\n \u003c\/li\u003e\n \u003cli\u003e\n  7-bit unshifted I2C Address: 0x29\n \u003c\/li\u003e\n \u003cli\u003e\n  Field of View: 15° - 27°\n \u003c\/li\u003e\n \u003cli\u003e\n  Max Read Rate: 50Hz\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Each VL53L1X sensor features a precision to be 1mm with an accuracy around +\/-5mm and a minimum read distance of this sensor is 4cm. The field of view for this little breakout is fairly narrow at 15°-27° with a read rate of up to 50Hz. Make sure to power this board appropriately since it will need 2.6V-3.5V to operate. Lastly, please be sure to remove the protective sticker on the VL53L1X before use otherwise it will, most assuredly, throw off your readings.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Note:\n \u003c\/strong\u003e\n The I\n \u003csup\u003e\n  2\n \u003c\/sup\u003e\n C address of the VL53L1X is 0x29 and is hardware defined. A multiplexer\/Mux is required to communicate to multiple VL53L1X sensors on a single bus. If you need to use more than one VL53L1X sensor consider using the Qwiic Mux Breakout.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Note:\n \u003c\/strong\u003e\n \u003ca href=\"http:\/\/en.wikipedia.org\/wiki\/Laser_safety#Class_1\"\u003e\n  CLASS 1\n \u003c\/a\u003e\n LASER PRODUCT CLASSIFIED IEC 60825-1 2014.\n\u003c\/p\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/3\/5\/c\/e\/2\/Qwiic_Distance_Sensor_-_VL53L1X.pdf\"\u003e\n   Schematic\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/a\/8\/9\/4\/a\/Qwiic_Distance_Sensor_-_VL53L1X.zip\"\u003e\n   Eagle Files\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/qwiic-distance-sensor-vl53l1x-hookup-guide\"\u003e\n   Hookup Guide\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/8\/9\/9\/a\/6\/VL53L0X_DS.pdf\"\u003e\n   Datasheet\n  \u003c\/a\u003e\n  (VL53L1X)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/e\/1\/8\/4\/e\/VL53L1X_API.pdf\"\u003e\n   User\/API Manual\n  \u003c\/a\u003e\n  (VL53L1X)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_VL53L1X_Arduino_Library\"\u003e\n   SparkFun VL53L1X Arduino Library\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/sparkfun\/Qwiic_VL53L1X_Py\"\u003e\n   SparkFun VL53L1X Python Package\n  \u003c\/a\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    \u003ca href=\"https:\/\/qwiic-vl53l1x-py.readthedocs.io\/en\/latest\/?\"\u003e\n     ReadtheDocs Documentation\n    \u003c\/a\u003e\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/sparkfun\/Qwiic_Distance_VL53L1X\"\u003e\n   GitHub Hardware Repo\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":56578185298301,"sku":"SEN-14722","price":26.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/14722-SparkFun_Distance_Sensor_Breakout-_4_Meter__VL53L1X__Qwiic_-01.jpg?v=1753830796"},{"product_id":"marvelmind-dsp-mini-rx-beacon-w-imu-sl4","title":"Marvelmind DSP Mini RX Beacon w\/ IMU [SL4]","description":"\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Navigation Positioning Mobile DSP Beacon\n \u003c\/li\u003e\n \u003cli\u003e\n  Offers 915 \/ 868 MHz\n \u003c\/li\u003e\n \u003cli\u003e\n  Includes IMU \u0026amp; Outdoor Case\n \u003c\/li\u003e\n \u003cli\u003e\n  Protects its ultrasonic microphone with a special IP67 membrane\n \u003c\/li\u003e\n \u003cli\u003e\n  Is fully covered by a water- dust-protecting compound\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Contact us for volume discounts if ordering more than 5 kits.\n\u003c\/p\u003e\n\u003cp\u003e\n The\n \u003cstrong\u003e\n  Indoor Navigation Positioning Mobile DSP Beacon w\/ IMU \u0026amp; Outdoor Case (Beacon Mini RX)\n \u003c\/strong\u003e\n features the Marvelmind Indoor Navigation System designed to provide precise (±2cm) location data to autonomous robots, vehicles (AGV), drones and forklifts. It can also be used to track other objects that the mobile beacon is installed upon, for example, virtual reality (VR) systems, helmets for construction workers or miners, jackets, etc.\n\u003c\/p\u003e\n\u003cp\u003e\n The ultrasonic microphone is protected with a special IP67 membrane. All internal compartment (electronics, battery) is fully covered by a water- dust-protecting compound. The USB connector is not protected. Thus, it is recommended to install the beacon so that the USB is at the bottom - to minimize the impact on the connector itself because electronics and battery are fully sealed.\n\u003c\/p\u003e\n\u003cp\u003e\n Note, the beacon has not received a formal IP67 certification, yet. The IP67 requirements are fulfilled by design and are verified by the water submerging test: placing for 30 min under 1m of water doesn't kill the device.\n\u003c\/p\u003e\n\u003ch3 class=\"about-headers\"\u003e\n Included\n\u003c\/h3\u003e\n\u003cdiv class=\"aboutContent clearfix\"\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   1 x DSP Beacons 915\/868MHz with 6DOF IMU (Beacon Mini RX)\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"about-headers\"\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cdiv class=\"aboutContent clearfix\"\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Distance between beacons\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Reach up to 50 meters in lab conditions\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Recommended distance is 30 meters (Transducer4 of Beacon HW v4.9 looking straight at Beacon DSP HW v5.xx)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Range of stable tracking of DSP beacon + Beacon HW v4.9 is 20-50% bigger, than the range of Beacon HW v4.9 + Beacon HW v4.9 in the same conditions\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Coverage area\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Reach up to 1,000 m2 with the Starter Set configurations\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Coverage for larger territories is similar to cellular networks\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Location precision\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Absolute: 1-3% of the distance to the beacons\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Differential precision: ±2 cm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Differential precision is on par or better than in the Beacon HW v4.9, partially, because the sensor is a point - not as spread sensors of HW v4.9; and, partially, because of higher processing power and more advanced algorithms of the DSP beacon\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Location update rate\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   0.05-25 Hz\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Can be set manually or in automatic mode\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Depends on the distance between the mobile and stationary beacons (shorter distance — higher update rate)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Depends on the number of mobile beacons: for example, update rate of 25 Hz for 1 mobile beacon will result in update rate of 25 Hz\/2 for 2 mobile beacons, and 25 Hz\/3 - for 3 mobile beacons, etc. - TDMA approach\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Depends on the radio interface profile (500 kbps vs. 38 kbps)\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Inverse Architecture:\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   0.05-25 Hz. With IMU fusion enabled - up to 100 Hz\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Can be set manually or in automatic mode\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Depends on the distance between the mobile and stationary beacons (shorter distance — higher update rate)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Doesn't depend on the number of mobile beacons - all of them are receiving\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Depends on the radio interface profile (500 kbps vs. 38 kbps)\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Power supply and battery lifetime\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Internal:\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   LiPo battery 750 mAh\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Battery lifetime totally depends on usage\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Stationary beacon with 8 Hz update rate =\u0026gt; up to 30 h\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Stationary beacon with 1 Hz update rate =\u0026gt; 1 week\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Future power saving features may increase battery life to 1 year and more\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   External:\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   microUSB - recommended for permanent use\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Weight\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   25 g (board + battery + plastic housing)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   9 g (board only)\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  Manufacturer Product Code: 4680038530234\n \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"Marvelmind Robotics","offers":[{"title":"Default Title","offer_id":56578185855357,"sku":"D0F-2C9-198","price":94.92,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/DSC_9057_1920.jpg?v=1753830803"},{"product_id":"crazyflie-multi-ranger-deck","title":"Crazyflie Multi-ranger deck","description":"\u003cp\u003e\n The multi-ranger deck gives the Crazyflie 2.X the ability to detect objects around it. This is done by measuring the distance to objects in the following 5 directions: front\/back\/left\/right\/up with mm precision up to 4 meters.\n\u003c\/p\u003e\n\u003cp\u003e\n To get the most out of your Multi-ranger it should be paired with a\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/crazyflie-2-0-flow-deck\/\"\u003e\n  Flow deck\n \u003c\/a\u003e\n , which will measure the movement along the ground and the distance to the ground.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Features\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Fast, accurate distance ranging\n \u003c\/li\u003e\n \u003cli\u003e\n  Measures absolute range up to 4m in 5 directions\n \u003c\/li\u003e\n \u003cli\u003e\n  Eye safe\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Specifications\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cdiv class=\"level2\"\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   5 x\n   \u003ca href=\"http:\/\/www.st.com\/en\/imaging-and-photonics-solutions\/vl53l1x.html\"\u003e\n    VL53L1x\n   \u003c\/a\u003e\n   ToF sensor to measure distance up to 4 meters within a few millimeters (depending on surface and light conditions)\n  \u003c\/li\u003e\n  \u003cli class=\"level1\"\u003e\n   \u003cdiv class=\"li\"\u003e\n    1-wire memory for automatic expansion deck detection\n   \u003c\/div\u003e\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Mechanical specifications\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"level2\"\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Weight: 2.3g\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Size (WxHxD): 35x35x5mm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Designed for mounting on top of the Crazyflie 2.X\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Compatibility\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   \u003ca href=\"https:\/\/wiki.bitcraze.io\/projects:crazyflie2:expansionboards:index#compatibility_matrixes\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n    See compatibility matrix\n   \u003c\/a\u003e\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Package content\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   1 x Multi-ranger deck\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578187985277,"sku":"114991485","price":88.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/multi-ranger_deck_1200px-1_1024x1024_dfc7c6f4-d879-4fac-885e-a31287817fc3.jpg?v=1753830836"},{"product_id":"marvelmind-industrial-super-beacon-tx-rx-ip67","title":"Marvelmind Industrial Super Beacon TX\/RX IP67","description":"\u003cp\u003e\n The\n \u003cstrong\u003e\n  IP67 Heavy Duty Outdoor Transmitting Beacon\n \u003c\/strong\u003e\n includes corresponding IP67 connectors (male part). The extended working temperature ranges from -40 °C to +50 °C (not tested, provided by design). Features a TX-only beacon - can transmit ultrasonically, but can't receive it.  This is used as the mobile beaon in industrial applications such as onbaord a forklift.\n\u003c\/p\u003e\n\u003cp\u003e\n It comes with an embedded reset switch and DFU switch - magnetic control. It can work together with modems with corresponding radio (radio bands must match).  Can work with any DSP beacon or Beacon HW v4.9 with 25kHz ultrasonic sensors (radio bands must match). Most of all designed to work together with Outdoor versions of DSP beacons: DSP \"watch\" HW v5.xx and heavy outdoor Beacon-RX-IP67 (radio bands must match).\n\u003c\/p\u003e\n\u003ch1\u003e\n Key Features\n\u003c\/h1\u003e\n\u003cul\u003e\n \u003cli\u003e\n  IP67 Heavy Duty Outdoor Transmitting Beacon\n \u003c\/li\u003e\n \u003cli\u003e\n  Frequency: 915\/868MHz\n \u003c\/li\u003e\n \u003cli\u003e\n  Features a TX-only beacon\n \u003c\/li\u003e\n \u003cli\u003e\n  Has special IP67-protected 25-kHz transducers\n \u003c\/li\u003e\n \u003cli\u003e\n  Includes an external antenna with SMA connector for extended radio range\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Two IP67 external connectors:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Power:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  +12 V input  (works from +6V to +15V)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Interfaces:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  RS485\n \u003c\/li\u003e\n \u003cli\u003e\n  UART 3.3 V\n \u003c\/li\u003e\n \u003cli\u003e\n  USB (TX+RX)\n \u003c\/li\u003e\n \u003cli\u003e\n  GND\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Corresponding IP67 connectors (male part) included\n \u003c\/li\u003e\n \u003cli\u003e\n  No battery inside\n \u003c\/li\u003e\n \u003cli\u003e\n  Extended working temperature range: -40 °C - +50 °C (not tested, provided by design)\n \u003c\/li\u003e\n \u003cli\u003e\n  Embedded reset switch and DFU switch - magnetic control\n \u003c\/li\u003e\n \u003cli\u003e\n  Can work together with modems with corresponding radio (radio bands must match)\n \u003c\/li\u003e\n \u003cli\u003e\n  Can work with any DSP beacon or Beacon HW v4.9 with 25 kHz ultrasonic sensors (radio bands must match)\n \u003c\/li\u003e\n \u003cli\u003e\n  Most of all designed to work together with Outdoor versions of DSP beacons: DSP \"watch\" HW v5.xx and heavy outdoor Beacon-RX-IP67 (radio bands must match)\n \u003c\/li\u003e\n \u003cli\u003e\n  Up to 30 m with Beacon DSP+IMU+Outdoor\n \u003c\/li\u003e\n \u003cli\u003e\n  Optional external IP67 converter ~110\/220 V to +12 V\n \u003c\/li\u003e\n \u003cli\u003e\n  Optional extra 12V 5Ah outdoor battery\n \u003c\/li\u003e\n \u003cli\u003e\n  Optional industrial USB cable (USB to IP67 connectors for the device)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Manufacturer Product Code - 4680038530333\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"Marvelmind Robotics","offers":[{"title":"Default Title","offer_id":56578190770557,"sku":"0EA-0DD-7BB","price":74.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/ip67-heavy-duty-outdoor-transmitting-beacon-915mhz.jpg?v=1753830842"},{"product_id":"marvelmind-dsp-2d-lite-indoor-navigation-positioning-system-inverse-architecture","title":"Marvelmind DSP 2D Lite Indoor Navigation Positioning System (Inverse Architecture)","description":"\u003cp\u003e\n This is a Starter Set supporting Inverse Architecture (IA) with 2D tracking (XY).  Ideal for tracking warehouse workers with extra\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/marvelmind-dsp-beacon-module-w-imu\/\"\u003e\n  DSP RX Beacons\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n In the Inverse Architecture (IA), stationary beacons emit ultrasound and mobile beacons receive it. Thus, it is possible to have multiple mobile beacons without update rate reduction per mobile beacon. unlike in Non-Inverse where the mobile beacons emit and the stationary beacons receive only, making non inverse architecture better suited to noisy environments such as onboard drones.\n\u003c\/p\u003e\n\u003cp\u003e\n The HW supports both 915MHz (the US - ISM license-free band) and 868MHz (the EU - SRD license-free band). The right radio band can be selected by radio settings inside the Dashboard.\n\u003c\/p\u003e\n\u003ch3 class=\"about-headers\"\u003e\n Included\n\u003c\/h3\u003e\n\u003cdiv class=\"aboutContent clearfix\"\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   1 x\n   \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/marvelmind-dsp-beacon-module-w-imu\/\"\u003e\n    DSP RX Beacons 915\/868MHz\n   \u003c\/a\u003e\n   as mobile beacons (Beacon Mini RX)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   2 x\n   \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/marvelmind-stationary-beacon-v4-9-433mhz-915mhz\/\"\u003e\n    Stationary Beacon TX with IMU 915\/868 MHz\n   \u003c\/a\u003e\n   as stationary beacons\n  \u003c\/li\u003e\n  \u003cli\u003e\n   1 x\n   \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/marvelmind-indoor-navigation-positioning-modem-w-case\/\"\u003e\n    Modem HW v4.9 915\/868 MHz\n   \u003c\/a\u003e\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"about-headers\"\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cdiv class=\"aboutContent clearfix\"\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Distance between beacons\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Reach up to 50 meters in lab conditions\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Recommended distance is 30 meters (Transducer of Beacon HW v4.9 looking straight at Beacon DSP HW v5.xx)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Range of stable tracking of DSP beacon + Beacon HW v4.9 is 20-50% bigger than the range of Beacon HW v4.9 + Beacon HW v4.9 in the same conditions\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Coverage area\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Reach up to 1000 m2 with the Starter Set configurations\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Coverage for larger territories is similar to cellular networks\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Location precision\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Absolute: 1-3% of the distance to the beacons\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Differential precision: ±2 cm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Differential precision is on par or better than in the Beacon HW v4.9, partially, because the sensor is a point - not as spread sensors of HW v4.9; and, partially, because of higher processing power and more advanced algorithms of the DSP beacon\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Location update rate\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Inverse Architecture:\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   0.05-25Hz. With IMU fusion enabled - up to 100Hz\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Can be set manually or in automatic mode\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Depends on the distance between the mobile and stationary beacons (shorter distance — higher update rate)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Doesn't depend on the number of mobile beacons - all of them are receiving\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Depends on the radio interface profile (500kbps vs. 38kbps)\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Power supply and battery lifetime\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Internal:\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   LiPo battery 750mAh\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Battery lifetime totally depends on usage\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Stationary beacon with 8Hz update rate =\u0026gt; up to 30h\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Stationary beacon with 1Hz update rate =\u0026gt; 1 week\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Future power saving features may increase battery life to 1year and more\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   External:\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   microUSB - recommended for permanent use\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Weight\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   25g (board + battery + plastic housing)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   9g (board only)\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  Manufacturer Product Code: 4680038530265\n \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"Marvelmind Robotics","offers":[{"title":"Default Title","offer_id":56578192703869,"sku":"C11-7FF-031","price":289.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Starter-Set-IA-01-2D-2-scaled.jpg?v=1753830860"},{"product_id":"marvelmind-super-beacon","title":"Marvelmind Super Beacon","description":"\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Marvelmind Super-Beacon (19kHz, 25kHz, 31kHz, 37kHz, 45kHz)\n \u003c\/li\u003e\n \u003cli\u003e\n  More sensitive, than Beacon HW v4.9\n \u003c\/li\u003e\n \u003cli\u003e\n  Dual-use beacon: Receive and Transmit ultrasonic pulses\n \u003c\/li\u003e\n \u003cli\u003e\n  Work both as stationary and as mobile\n \u003c\/li\u003e\n \u003cli\u003e\n  Receive several ultrasonic frequencies at once\n \u003c\/li\u003e\n \u003cli\u003e\n  Works with regular Beacons HW v4.9, Mini-RX and Industrial-RX\n \u003c\/li\u003e\n \u003cli\u003e\n  Used for autonomous robots, vehicles, and drones\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"aboutBox BoxDescription product-sheet-attribute\" data-component=\"rb-attribute-nav-target\" data-tab-id=\"description\" id=\"description\"\u003e\n \u003cdiv class=\"aboutContent clearfix\"\u003e\n  \u003cdiv class=\"std\"\u003e\n   \u003cp\u003e\n    The Marvelmind Super-Beacon is a beacon for Marvelmind precise Indoor positioning and navigation system. It can work both as stationary and as mobile.\n   \u003c\/p\u003e\n   \u003cp\u003e\n    The system is used for autonomous robots, vehicles, drones, and people as well as for industrial applications requiring precise positioning and localization indoor.\n   \u003c\/p\u003e\n   \u003cp\u003e\n    The Super-Beacon can receive any ultrasonic frequency from the bands: 19kHz, 25kHz, 31kHz, 37kHz, 45kHz. The filter can be simply selected in the Dashboard. At the same time, the ultrasonic frequency of Beacon HW v4.9 is HW-defined by ultrasonic sensors and can't be changed.\n   \u003c\/p\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-sheet-attribute aboutBox Specifications\" data-component=\"rb-attribute-nav-target\" data-tab-id=\"Specifications\" id=\"Specifications\"\u003e\n \u003ch3 class=\"about-headers\"\u003e\n  Specifications\n \u003c\/h3\u003e\n \u003cdiv class=\"aboutContent clearfix\"\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Distance between beacons\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Reaches up to 50 meters in lab conditions\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Recommended distance is up to 30 meters (RX4 to RX4)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Range of stable tracking of Super-Beacon + Super-Beacon is 20-50% bigger than the range of Beacon HW v4.9 + Beacon HW v4.9 in the same conditions\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Coverage area\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Reaches up to 1,000 m2 with the Starter Set configurations\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Coverage for larger territories is similar to cellular networks\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Location precision\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Absolute: 1-3% of the distance to the beacons\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Differential precision: ±2 cm\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Differential precision is on par or better than in the Beacon HW v4.9, partially\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Location update rate\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Non-Inverse Architecture:\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    0.05-25 Hz\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Can be set manually or in automatic mode\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Depends on the distance between the mobile and stationary beacons\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Depends on the number of mobile beacons\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Depends on the radio interface profile (500 kbps vs. 38 kbps)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Inverse Architecture:\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    0.05-25 Hz. Future SW releases are planned to support IMU fusion that will enable an update rate of up to 100 Hz\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Can be set manually or in automatic mode\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Depends on the distance between the mobile and stationary beacons\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Doesn't directly depend on the number of mobile beacons - all of them are receiving\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Depends on the radio interface profile\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Power supply and battery lifetime\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Internal:\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    LiPo battery 1000 mAh\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Battery lifetime totally depends on usage\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Receiving beacon mode with 8 Hz update rate and 10m-sub-maps =\u0026gt; up to 30h\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Transmitting beacon with 1\/10 Hz update rate =\u0026gt; several months\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Future power saving features may increase battery life to 1year and more\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    External:\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   micro USB - recommended for permanent use\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Weight\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    59 grams (including 1000 mAh battery, housing, and 50-mm antenna)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    27 grams (bare board w\/o battery)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-sheet-attribute aboutBox What-s-Included\" data-component=\"rb-attribute-nav-target\" data-tab-id=\"What-s-Included\" id=\"What-s-Included\"\u003e\n \u003ch3 class=\"about-headers\"\u003e\n  What's Included\n \u003c\/h3\u003e\n \u003cdiv class=\"aboutContent clearfix\"\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    1 x Marvelmind Super-Beacon (31kHz)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-sheet-attribute aboutBox Dimensions\" data-component=\"rb-attribute-nav-target\" data-tab-id=\"Dimensions\" id=\"Dimensions\"\u003e\n \u003ch3 class=\"about-headers\"\u003e\n  Dimensions\n \u003c\/h3\u003e\n \u003cdiv class=\"aboutContent clearfix\"\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Size\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    55 x 55 x 33 mm\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Marvelmind Robotics","offers":[{"title":"19kHz","offer_id":56578195390845,"sku":"108-861-811","price":103.73,"currency_code":"GBP","in_stock":false},{"title":"25kHz","offer_id":56578195423613,"sku":"3E8-36A-538","price":103.73,"currency_code":"GBP","in_stock":false},{"title":"31kHz","offer_id":56578195456381,"sku":"834-1CC-E43","price":137.08,"currency_code":"GBP","in_stock":true},{"title":"37kHz","offer_id":56578195489149,"sku":"E60-C1C-FBE","price":103.73,"currency_code":"GBP","in_stock":false},{"title":"45kHz","offer_id":56578195521917,"sku":"E8C-D0F-7CE","price":103.73,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Marvelmind-Super-Beacon.jpg?v=1753830873"},{"product_id":"marvelmind-beacon-hw-v4-9-868mhz-915mhz-sl4","title":"Marvelmind Beacon HW v4.9 (868mHz \/ 915mHz)","description":"\u003cp\u003e\n The indoor positioning beacon is what you can use to track the position of the beacon, or any object the beacon is mounted on with an accuracy of up to 2cm. The beacons use ultrasonic pings, connected via an ISM band telemetry connection to accurately and affordably tracking objects indoors. To extend the range of the\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/indoor-navigation-positioning-system-starter-set-w-case-915-433mhz\/\"\u003e\n  indoor positioning starter kit\n \u003c\/a\u003e\n , you can add more beacons to increase the coverage area. This beacon is designed to be a mobile beacon since it has an internal IMU sensor, however, it can also just as easily be used as a stationary beacon by changing the settings via the configuration software.\n\u003c\/p\u003e\n\u003cp\u003e\n This beacon includes a 915\/868Mhz radio (software switchable)\n\u003c\/p\u003e\n\u003ch1\u003e\n Key Features\n\u003c\/h1\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Additional beacon to track more objects\n \u003c\/li\u003e\n \u003cli\u003e\n  Built-in IMU to gain extra motion information\n \u003c\/li\u003e\n \u003cli\u003e\n  Can be used as a stationary beacon to increase coverage area\n \u003c\/li\u003e\n \u003cli\u003e\n  Built-in rechargeable battery\n \u003c\/li\u003e\n \u003cli\u003e\n  Up to 1300h (\u0026gt;100 days with 12h\/day \u0026amp; 1Hz location update rate) in active mode when powered from the battery. Up 2y in deep sleep mode\n \u003c\/li\u003e\n \u003cli\u003e\n  General Features of Marvelmind Indoor Positioning system\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n General Features of Marvelmind Indoor Positioning system\n\u003c\/h1\u003e\n\u003cul\u003e\n \u003cli\u003e\n  High-precision (+-2cm) indoor navigation system for autonomous robots and systems (\"indoor GPS\")\n \u003c\/li\u003e\n \u003cli\u003e\n  Indoor tracking and positioning of objects and humans equipped with beacons\n \u003c\/li\u003e\n \u003cli\u003e\n  Coverage radius of a beacon: up to 50 meters\n \u003c\/li\u003e\n \u003cli\u003e\n  Supports USB, UART, SPI and I2C interfaces on mobile beacon\n \u003c\/li\u003e\n \u003cli\u003e\n  Radio interface: 433MHz \u0026amp; 10mW - up to 100m in office environment\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Marvelmind Robotics","offers":[{"title":"Default Title","offer_id":56578197979517,"sku":"MMBIC915","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-indoor-navigation-positioning-mobile-beacon-case--imu-433mhz-1__37924.1508265292.1280.1280.jpg?v=1753830899"},{"product_id":"loco-positioning-deck-indoor-positioning-tag","title":"Loco Positioning Deck - Indoor Positioning Tag","description":"\u003cp\u003e\n The Loco positioning Deck is a Tag in the Loco Positioning system and measures the distance to Anchors. The distances are used to estimate the absolute position of the Crazyflie 2.X in the room, which can be used for autonomous flight.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cb\u003e\n  Note:\n \u003c\/b\u003e\n This product is intended to be used together with Loco Positioning Nodes and can not be used standalone.\n\u003c\/p\u003e\n\u003cp\u003e\n For more information on the Loco Positioning System please see this\n \u003ca href=\"https:\/\/www.bitcraze.io\/loco-pos-system\/\" title=\"Loco Positioning System\"\u003e\n  Loco Positioning System page\n \u003c\/a\u003e\n .\n\u003c\/p\u003e\n\u003cp\u003e\n Specifications are based on the standard 2-way ranging mode.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cb\u003e\n \u003c\/b\u003e\n \u003cb\u003e\n  Features\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Measures distances to Loco Positioning Node Anchors\n \u003c\/li\u003e\n \u003cli\u003e\n  4 status LEDs\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cb\u003e\n  Electrical specifications\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Based on the Decawave DWM1000 module\n \u003c\/li\u003e\n \u003cli\u003e\n  Implements IEEE 802.15.4 UWB\n \u003c\/li\u003e\n \u003cli\u003e\n  1-wire memory for automatic expansion deck detection\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cb\u003e\n  Ranging specifications\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Ranging accuracy ±10 cm according to DWM1000 spec. See\n  \u003ca href=\"https:\/\/wiki.bitcraze.io\/misc:investigations:lps-precision\"\u003e\n   the wiki\n  \u003c\/a\u003e\n  for measurements.\n \u003c\/li\u003e\n \u003cli\u003e\n  Maximum tested range 10 m\n \u003c\/li\u003e\n \u003cli\u003e\n  Ranging rate 500 Hz, shared over all anchors. Around 80Hz per anchor with 6 anchors\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cb\u003e\n  Radio specifications\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Operates at 3.2 - 7 GHz\n \u003c\/li\u003e\n \u003cli\u003e\n  Channel bandwidth 500 MHz\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Power consumption\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Max 150 mA, depends on operation mode and configuration\n \u003c\/li\u003e\n \u003cli\u003e\n  Crazyflie 2.X flight time with deck 6 minutes\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cb\u003e\n  Mechanical specifications\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Weight: 3.3 g\n \u003c\/li\u003e\n \u003cli\u003e\n  Size (WxHxD): 28x35x4 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Designed for mounting above or under the Crazyflie 2.X\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cb\u003e\n  Compatibility\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/wiki.bitcraze.io\/projects:crazyflie2:expansionboards:index#compatibility_matrixes\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n   See compatibility matrix\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Loco Positioning Nodes\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cb\u003e\n  Package contents\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1 x Loco Positioning deck\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"level2\"\u003e\n \u003cstrong\u003e\n  Resources\n \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"level2\"\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   \u003ca href=\"https:\/\/www.bitcraze.io\/development-overview\/\" title=\"Bitcraze development\"\u003e\n    Development\n   \u003c\/a\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n   \u003ca href=\"https:\/\/wiki.bitcraze.io\/projects:lps:deck\" title=\"Loco deck wiki page\"\u003e\n    Wiki page\n   \u003c\/a\u003e\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578198077821,"sku":"114990655","price":79.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/locoPositioning_deck_585px_side.jpg?v=1753830901"},{"product_id":"marvelmind-stationary-tx-rx-beacon-v4-9-433mhz-sl4","title":"Marvelmind Stationary TX\/RX Beacon v4.9 (433mHz) [SL4]","description":"\u003cp\u003e\n This is a stationary beacon that forms part of the marvelmind indoor positioning system.  It allows for an accuracy of up to 2cm. The beacons use ultrasonic pings, connected via an ISM band telemetry connection to accurately and affordably tracking objects indoors. To extend the range of the\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/indoor-navigation-positioning-system-starter-set-w-case-915-433mhz\/\"\u003e\n  indoor positioning starter kit\n \u003c\/a\u003e\n , you can add more beacons to increase the coverage area. This beacon is designed to be a stationary beacon.\n\u003c\/p\u003e\n\u003cp\u003e\n This beacon is available with a 433Mhz radio and does not include an IMU, so can only be used for stationary beacons.\n\u003c\/p\u003e\n\u003ch1\u003e\n Key Features\n\u003c\/h1\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Can be added to the network to increase coverage area of indoor positioning system\n \u003c\/li\u003e\n \u003cli\u003e\n  Built-in rechargeable battery\n \u003c\/li\u003e\n \u003cli\u003e\n  Up to 1300h (\u0026gt;100 days with 12h\/day \u0026amp; 1Hz location update rate) in active mode when powered from the battery. Up 2y in deep sleep mode\n \u003c\/li\u003e\n \u003cli\u003e\n  General Features of Marvelmind Indoor Positioning system\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n General Features of Marvelmind Indoor Positioning system\n\u003c\/h1\u003e\n\u003cul\u003e\n \u003cli\u003e\n  High-precision (+-2cm) indoor navigation system for autonomous robots and systems (\"indoor GPS\")\n \u003c\/li\u003e\n \u003cli\u003e\n  Indoor tracking and positioning of objects and humans equipped with beacons\n \u003c\/li\u003e\n \u003cli\u003e\n  Coverage radius of a beacon: up to 50 meters\n \u003c\/li\u003e\n \u003cli\u003e\n  Supports USB, UART, SPI and I2C interfaces on mobile beacon\n \u003c\/li\u003e\n \u003cli\u003e\n  Radio interface: 433MHz\/915Mhz \u0026amp; 10mW - up to 100m in office environment\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Marvelmind Robotics","offers":[{"title":"Default Title","offer_id":56578198831485,"sku":"MMB433","price":46.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-indoor-navigation-positioning-mobile-beacon-case--imu-433mhz-2__89124.1508266153.1280.1280.jpg?v=1753830912"},{"product_id":"loco-positioning-node-indoor-positioning-device","title":"Loco Positioning Node - Indoor Positioning Device","description":"\u003cdiv class=\"level2\"\u003e\n \u003cp\u003e\n  The Loco Positioning Node is a versatile positioning device that can run either as an Anchor or Tag in a Loco Positioning system. The system measures the distance between Nodes and Tags, and from those distances the absolute position of objects carrying Tags can be calculated.\n \u003c\/p\u003e\n \u003cp\u003e\n  For more information on the Loco Positioning System please see this\n  \u003ca href=\"https:\/\/www.bitcraze.io\/loco-pos-system\/\" title=\"Loco Positioning System\"\u003e\n   Loco Positioning System page\n  \u003c\/a\u003e\n  .\n \u003c\/p\u003e\n \u003cp\u003e\n  Specifications are based on the standard 2-way ranging mode.\n \u003c\/p\u003e\n \u003cp class=\"collapse-section\"\u003e\n  \u003cstrong\u003e\n   Features\n  \u003c\/strong\u003e\n \u003c\/p\u003e\n \u003cdiv aria-expanded=\"true\" class=\"collapse in\" id=\"CollapseSection46\"\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Supports Anchor, Tag or Sniffer mode\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Can be used as a standalone system with some Nodes acting as Anchors and one or more nodes acting as Tags\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Multiple powering options\n   \u003c\/li\u003e\n   \u003cli\u003e\n    On board MCU\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"collapse-section\"\u003e\n  \u003cdiv aria-expanded=\"true\" class=\"collapse in\" id=\"CollapseSection47\"\u003e\n   \u003cp id=\"electrical-specification\"\u003e\n    \u003cstrong\u003e\n     Electrical specification\n    \u003c\/strong\u003e\n   \u003c\/p\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     Based on the Decawave DWM1000 module\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Implements IEEE 802.15.4 UWB\n    \u003c\/li\u003e\n    \u003cli\u003e\n     STM32F072 MCU (Cortex-M0, 48MHz, 16kb SRAM, 128kb flash)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     High precision pressure sensor (LPS25H)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     uUSB connector\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Full speed USB device interface\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Powered by USB, 6 mm barrel jack (5 - 12V) or screw terminal (5 - 12V)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     FTDI debug port (not populated)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Serial connector compatible with ESP8266 module (not populated)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Power consumption 180 mA max\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cp id=\"ranging-specification\"\u003e\n    \u003cstrong\u003e\n     Ranging specification\n    \u003c\/strong\u003e\n   \u003c\/p\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     Ranging accuracy ±10 cm according to DWM1000 spec. See\n     \u003ca href=\"https:\/\/wiki.bitcraze.io\/misc:investigations:lps-precision\"\u003e\n      the wiki\n     \u003c\/a\u003e\n     for measurements.\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Maximum tested range 10 m\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Nr of anchors required: theoretical minimum of 4 for 3D positioning. More anchors adds redundancy and accuracy, up to 8 supported.\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cp id=\"radio-specification\"\u003e\n    \u003cstrong\u003e\n     Radio specification\n    \u003c\/strong\u003e\n   \u003c\/p\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     Operates at 3.2 - 7 GHz\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Channel bandwidth 500 MHz\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cp id=\"mechanical-specification\"\u003e\n    \u003cstrong\u003e\n     Mechanical specification\n    \u003c\/strong\u003e\n   \u003c\/p\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     Weight: 13.3 g\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Size (WxHxD): 65x40x13 mm\n    \u003c\/li\u003e\n    \u003cli\u003e\n     4 mounting holes for M3 screws\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cp id=\"compatibility\"\u003e\n    \u003cstrong\u003e\n     Compatibility\n    \u003c\/strong\u003e\n   \u003c\/p\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     Works with the Loco Positioning Deck\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cp id=\"package-contents\"\u003e\n    \u003cstrong\u003e\n     Package contents\n    \u003c\/strong\u003e\n   \u003c\/p\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     1 x Loco Positioning Node\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cdiv class=\"level2\"\u003e\n    \u003cstrong\u003e\n     Resources\n    \u003c\/strong\u003e\n   \u003c\/div\u003e\n   \u003cdiv class=\"level2\"\u003e\n    \u003cul\u003e\n     \u003cli\u003e\n      \u003ca href=\"https:\/\/www.bitcraze.io\/development-overview\/\" title=\"Bitcraze development\"\u003e\n       Development\n      \u003c\/a\u003e\n     \u003c\/li\u003e\n     \u003cli\u003e\n      \u003ca href=\"https:\/\/wiki.bitcraze.io\/projects:lps:node\" title=\"Loco positioning node wiki page\"\u003e\n       Wiki page\n      \u003c\/a\u003e\n     \u003c\/li\u003e\n    \u003c\/ul\u003e\n   \u003c\/div\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"BitCraze","offers":[{"title":"Default Title","offer_id":56578198929789,"sku":"114990656","price":149.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/locoPositioning_node_585px_side.jpg?v=1753830914"},{"product_id":"marvelmind-modem-hw-v4-9-433mhz-sl4","title":"Marvelmind Modem HW v4.9 (433Mhz) [SL4]","description":"\u003cp\u003e\n The router is the central controller of the system which calculates position of mobile beacon (\"hedgehog\") 16 times per second based on data from beacons. They communicate via USB with dashboard and with beacons wirelessly in ISM band.  This is the core of the Marvelmind indoor positioning kit.\n\u003c\/p\u003e\n\u003cp\u003e\n This modem uses a 433Mhz radio\n\u003c\/p\u003e\n\u003ch1\u003e\n Key Features\n\u003c\/h1\u003e\n\u003cul\u003e\n \u003cli\u003e\n  High-precision (+-2cm) indoor navigation system for autonomous robots and systems (\"indoor GPS\")\n \u003c\/li\u003e\n \u003cli\u003e\n  Indoor tracking and positioning of objects and humans equipped with beacons\n \u003c\/li\u003e\n \u003cli\u003e\n  Coverage radius of a beacon: up to 50 meters\n \u003c\/li\u003e\n \u003cli\u003e\n  Up to 1300h (\u0026gt;100 days with 12h\/day \u0026amp; 1Hz location update rate) in active mode when powered from battery. Up 2y in deep sleep mode\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n General Features of Marvelmind Indoor Positioning system\n\u003c\/h1\u003e\n\u003cul\u003e\n \u003cli\u003e\n  High-precision (+-2cm) indoor navigation system for autonomous robots and systems (\"indoor GPS\")\n \u003c\/li\u003e\n \u003cli\u003e\n  Indoor tracking and positioning of objects and humans equipped with beacons\n \u003c\/li\u003e\n \u003cli\u003e\n  Coverage radius of a beacon: up to 50 meters\n \u003c\/li\u003e\n \u003cli\u003e\n  Supports USB, UART, SPI and I2C interfaces on mobile beacon\n \u003c\/li\u003e\n \u003cli\u003e\n  Radio interface: 433MHz\/915Mhz \u0026amp; 10mW - up to 100m in office environment\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Marvelmind Robotics","offers":[{"title":"Default Title","offer_id":56578200797565,"sku":"MMR433","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-indoor-navigation-positioning-modem-case-433mhz-1__04622.1506079074.1280.1280.jpg?v=1753830931"},{"product_id":"garmin-lidar-lite-v4-led-distance-measurement-sensor","title":"Garmin LIDAR-Lite v4 LED - Distance Measurement Sensor","description":"\u003cp\u003e\n The LIDAR-Lite v4 LED sensor is the next step in the LIDAR-Lite line. A small, lightweight, low-power optical ranging sensor. It's the first to incorporate ANT profile wireless networking technology into an optical sensor. Its built-in nRF52840 processor means that developers can create custom applications, or be operated as a stand-alone device right out of the box by using the preloaded stock application.\n\u003c\/p\u003e\n\u003cp\u003e\n Like the\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/lidar-lite-v3\/\"\u003e\n  LIDAR-Lite v3\n \u003c\/a\u003e\n and\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/lidar-lite-v3hp\/\"\u003e\n  LIDAR-Lite v3HP\n \u003c\/a\u003e\n sensors; it can also be directly connected to an external micro-controller running a custom user application. As such, it provides a highly adaptable option for OEM and maker applications in robotics, Internet of Things, and unmanned vehicles — or any application where an ultrasonic sensor might otherwise be used. It's perfect as the basic building block for applications where wireless capabilities, small size, light weight, low power consumption and high performance are important factors in a short-range, 10-meter, optical distance measuring sensor.\n\u003c\/p\u003e\n\u003cp\u003e\n The LIDAR-Lite v4 requires an external 5VDC power source and soldering is required. This Time-of-Flight ranging module uses a LED and optics for ranging. It does not use a laser; therefore, it is inherently eye-safe under normal usage.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003c\/p\u003e\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 10px 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/IMa8-5dB3U4\" frameborder=\"0\" allowfullscreen style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u0026amp;feature=emb_title\n\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Resolution: 1 cm\n \u003c\/li\u003e\n \u003cli\u003e\n  Measurement repeatability:\n  \u003cul\u003e\n   \u003cli\u003e\n    As measured indoors to a 90% reflective target\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1 cm is equivalent to 1 standard deviation\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Using \"high accuracy\" mode, with averaging:\n    \u003cul\u003e\n     \u003cli\u003e\n      +\/- 1 cm to 2 meters\n     \u003c\/li\u003e\n     \u003cli\u003e\n      +\/- 2 cm to 4 meters\n     \u003c\/li\u003e\n     \u003cli\u003e\n      +\/- 5 cm to 10 meters\n     \u003c\/li\u003e\n    \u003c\/ul\u003e\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Range: 5 cm to 10 meters (as measured from back of unit)\n \u003c\/li\u003e\n \u003cli\u003e\n  Update rate:\n  \u003cul\u003e\n   \u003cli\u003e\n    I2C = \u0026gt;200 Hz typical\n   \u003c\/li\u003e\n   \u003cli\u003e\n    ANT® = up to 200 Hz to a 90% target indoors at 2m in normal operating mode\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Interface: I2C or ANT; user configurable for SPI using the Nordic SDK\n \u003c\/li\u003e\n \u003cli\u003e\n  Power (operating voltage): 4.75 - 5.25 VDC\n \u003c\/li\u003e\n \u003cli\u003e\n  Current consumption: 2mA idle, 85mA during acquisition\n \u003c\/li\u003e\n \u003cli\u003e\n  Operating temperature: -20 to 60° C\n \u003c\/li\u003e\n \u003cli\u003e\n  LED wavelength: 940 nm\n \u003c\/li\u003e\n \u003cli\u003e\n  Beam divergence: 4.77°\n \u003c\/li\u003e\n \u003cli\u003e\n  Optical aperture: 14.9 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Unit size (HxWxD): 2.1\" x 0.8\" x 0.9\" (52.2 x 21.2 x 24.0 mm)*\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 14.6 g (0.5 oz)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Documents\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/static.garmin.com\/pumac\/LIDAR-Lite%20LED%20v4%20Instructions_EN-US.pdf\"\u003e\n   Installation Instructions\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/static.garmin.com\/pumac\/ISPI_LED_Optical_Ranging_Sensor_ML.pdf\"\u003e\n   Safety and Product Information\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/garmin\/LIDARLite_Arduino_Library\"\u003e\n   LIDAR-Lite Arduino Library Github\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/garmin\/LIDARLite_ANT_Library\"\u003e\n   LIDAR-Lite ANT Library\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56578207482237,"sku":"05C-F77-E9A","price":90.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/15776-Garmin_LIDAR-Lite_V4_LED_-_Distance_Measurement_Sensor-01.jpg?v=1753830967"},{"product_id":"vl53l0x-tof-distance-ranging-sensor-ranging-up-to-2m","title":"VL53L0X ToF Distance Ranging Sensor, Ranging up to 2m","description":"\u003cp\u003e\n The VL53L0X is a ToF sensor which embeds the ST's second generation FlightSense technology.\n\u003c\/p\u003e\n\u003cp\u003e\n Unlike conventional ranging sensors, the VL53L0X is able to provide accurate distance measurement whatever the target color and reflectance, achieves better anti-interference capability\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  I2C communication interface, control the module on\/off via IO pins\n \u003c\/li\u003e\n \u003cli\u003e\n  Onboard voltage translator, compatible with 3.3V\/5V operating voltage\n \u003c\/li\u003e\n \u003cli\u003e\n  Comes with development resources and manual (examples for Raspberry Pi\/Arduino\/STM32)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Operating voltage: 3.3V\/5V\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimension: 20mm × 24mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting holes size: 2.0mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Ranging distance: 30 ~ 2000mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Ranging accuracy: ±5% (high speed mode), ±3% (high accuracy mode)\n \u003c\/li\u003e\n \u003cli\u003e\n  Ranging time (min): 20ms (high speed mode), 200ms (high accuracy mode)\n \u003c\/li\u003e\n \u003cli\u003e\n  Field of view: 25°\n \u003c\/li\u003e\n \u003cli\u003e\n  Laser wavelength: 940nm\n \u003c\/li\u003e\n \u003cli\u003e\n  Operating temperature: -20 ~ 70°C\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Pinouts\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  VCC: 3.3V\/5V power input\n \u003c\/li\u003e\n \u003cli\u003e\n  GND: ground\n \u003c\/li\u003e\n \u003cli\u003e\n  SDA: I2C data pin\n \u003c\/li\u003e\n \u003cli\u003e\n  SCL: I2C clock pin\n \u003c\/li\u003e\n \u003cli\u003e\n  SHUT: shutdown control, connects to IO pin\n \u003c\/li\u003e\n \u003cli\u003e\n  INT: interrupt output, connects to IO pin\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/www.waveshare.com\/wiki\/VL53L0X_Distance_Sensor\"\u003e\n   Wiki\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":56578210857341,"sku":"4E0-D89-AA1","price":7.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/vl53l0x-distance-sensor-2.jpg?v=1753831002"},{"product_id":"matek-micro-optic-flow-and-lidar-sensor","title":"Matek Micro Optic Flow and Lidar Sensor","description":"\u003cp\u003e\n This is a small and affordable way to add position hold functionality to your UAV without the need for GPS.  It has a working range of up to 2m, and uses a VL53L0X Lidar rangefinder along with a PMW3901 optic flow module.  It connects to your FC via UART and it currently supported only by INAV, but other firmware projects like betaflight will support this in the future.\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Brand Name: Matek System\n \u003c\/li\u003e\n \u003cli\u003e\n  Item Name: Optical Flow Lidar Sensor 3901-L0X Module\n \u003c\/li\u003e\n \u003cli\u003e\n  Optical Flow: PMW3901Lidar: VL53L0X\n \u003c\/li\u003e\n \u003cli\u003e\n  UART\n \u003c\/li\u003e\n \u003cli\u003e\n  Protocol: INAV MSP\n \u003c\/li\u003e\n \u003cli\u003e\n  Working Range: 8cm~200cm\n \u003c\/li\u003e\n \u003cli\u003e\n  Field of view: 42 degree(PMW3901), 27 degree(VL53L0X)\n \u003c\/li\u003e\n \u003cli\u003e\n  Minimum Illumination \u0026gt;60Lux\n \u003c\/li\u003e\n \u003cli\u003e\n  Input voltage: 4.5~5.5V\n \u003c\/li\u003e\n \u003cli\u003e\n  Power Consumption: 40mA\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 36x12mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 2g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Tips\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Be sure Optical Flow lens is more than 2cm way from anything for optic flow to initialise correctly while FC starting up.\n \u003c\/li\u003e\n \u003cli\u003e\n  Maximum range of VL53L0X is 2m, Altitude hold 0~2m @ throttle 0~100% if VL53L0X is enabled.\n \u003c\/li\u003e\n \u003cli\u003e\n  Any unused UART of FC supports it\n \u003c\/li\u003e\n \u003cli\u003e\n  Sonar connection (Trig \u0026amp; Echo) has not been implemented yet\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Optical Flow Lidar Sensor 3901-L0X Module\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578216165757,"sku":"3A3-138-AFD","price":24.13,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/84e221b6-4d25-4517-a856-cad25de2b6bb.jpg?v=1753831034"},{"product_id":"marvelmind-modem-hw-v-mhz-sl4","title":"Marvelmind Modem HW v. (\/Mhz) [SL4]","description":"\u003cp\u003e\n The router is the central controller of the system which calculates position of mobile beacon (\"hedgehog\") 16 times per second based on data from beacons. They communicate via USB with dashboard and with beacons wirelessly in ISM band.  This is the core of the Marvelmind indoor positioning kit.\n\u003c\/p\u003e\n\u003cp\u003e\n This modem uses a 915\/868Mhz radio (software switchable)\n\u003c\/p\u003e\n\u003ch1\u003e\n Key Features\n\u003c\/h1\u003e\n\u003cul\u003e\n \u003cli\u003e\n  High-precision (+-2cm) indoor navigation system for autonomous robots and systems (\"indoor GPS\")\n \u003c\/li\u003e\n \u003cli\u003e\n  Indoor tracking and positioning of objects and humans equipped with beacons\n \u003c\/li\u003e\n \u003cli\u003e\n  Coverage radius of a beacon: up to 50 meters\n \u003c\/li\u003e\n \u003cli\u003e\n  Up to 1300h (\u0026gt;100 days with 12h\/day \u0026amp; 1Hz location update rate) in active mode when powered from battery. Up 2y in deep sleep mode\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n General Features of Marvelmind Indoor Positioning system\n\u003c\/h1\u003e\n\u003cul\u003e\n \u003cli\u003e\n  High-precision (+-2cm) indoor navigation system for autonomous robots and systems (\"indoor GPS\")\n \u003c\/li\u003e\n \u003cli\u003e\n  Indoor tracking and positioning of objects and humans equipped with beacons\n \u003c\/li\u003e\n \u003cli\u003e\n  Coverage radius of a beacon: up to 50 meters\n \u003c\/li\u003e\n \u003cli\u003e\n  Supports USB, UART, SPI and I2C interfaces on mobile beacon\n \u003c\/li\u003e\n \u003cli\u003e\n  Radio interface: 433MHz\/915Mhz \u0026amp; 10mW - up to 100m in office environment\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Marvelmind Robotics","offers":[{"title":"Default Title","offer_id":56578220851581,"sku":"MMR915","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-indoor-navigation-positioning-modem-case-433mhz-1__04622.1506079074.1280.1280_a282492f-dfc0-4031-b775-f6124862c799.jpg?v=1753831067"},{"product_id":"marvelmind-industrial-beacon-rx-ip67","title":"Marvelmind Industrial Beacon RX IP67","description":"\u003ch1\u003eMarvelmind Industrial Beacon RX IP67 Tracking\u003c\/h1\u003e\n\u003cp\u003eYou finally took your autonomous rover outside into the unforgiving British drizzle, and your standard indoor positioning system drowned faster than a tinywhoop with no conformal coating. Enter the Marvelmind Industrial Beacon RX IP67 tracking receiver. This rugged ultrasonic tracking node is compound-sealed to survive factory floors, agriculture rigs, and whatever unholy mess you’re calling a robotics lab. It’s an RX-only industrial tracking receiver that passively listens for ultrasonic pings from your TX beacons. Yes, we're shamelessly padding the SEO with those keywords, but if you want precision tracking that doesn't let out the magic smoke when exposed to a puddle, this is the hardware you buy to keep our servers running.\u003c\/p\u003e\n\u003ch3\u003eWhy You Want It\u003c\/h3\u003e\n\u003cp\u003eBecause duct-taping a standard beacon inside a takeaway tub is embarrassing. This IP67 tracking receiver features a specialized membrane for the ultrasonic sensor, meaning it can \"hear\" position data without letting the local swamp water in. It supports RS485, UART, and USB, fed through heavy-duty external IP67 connectors (male plugs included, miraculously). My personal favourite spec? The -40°C to +50°C working temperature is officially \"provided by design, not tested.\" That's the kind of chaotic, send-it engineering we respect. We're pretty sure it'll handle a winter morning in Yorkshire, though. Buy it, test it, and let us know.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e IP67 compound-sealed (impervious to mud, rain, and your tears of frustration).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRole:\u003c\/strong\u003e RX-Only (receives ultrasonic pings; cannot transmit, won't talk back).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadio:\u003c\/strong\u003e 868MHz EU \/ 915MHz US via external SMA antenna (range up to a few hundred meters, or until it hits a brick wall).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 6V to 15V via external pins (no internal battery; BYO power supply, freeloader).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitches:\u003c\/strong\u003e Magnetic reset and DFU (because drilling holes for buttons ruins the waterproofing, genius).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemp Range:\u003c\/strong\u003e -40°C to +50°C (the manufacturer literally said \"not tested,\" so you get to be the crash dummy).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box*\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× Marvelmind Industrial-RX Beacon\u003c\/li\u003e\n\u003cli\u003e1× External SMA Antenna\u003c\/li\u003e\n\u003cli\u003e2× IP67 Male Connectors (Power \u0026amp; Data)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDisclaimer\u003c\/h2\u003e\n\u003cp\u003eConnector pinouts and antenna styles might shift depending on the manufacturer's mood, but the core mud-proof IP67 receiver is guaranteed.\u003c\/p\u003e\n\u003ch2\u003eStill Here Sifting Through Specs?\u003c\/h2\u003e\n\u003cp\u003eStill scrolling the spec sheet for an industrial IP67 ultrasonic receiver? You’re either billing a corporate card or you’ve traumatised enough bare PCBs to finally learn your lesson. Grab the beacon, wire up your RS485 properly the first time (check your grounds!), and let's get your tractor-bot navigating autonomously. Share this link with your lead engineer so they can approve the PO and we can afford more instant noodles.\u003c\/p\u003e\n\u003cp\u003eIndustrial-RX beacon:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for indoor and outdoor and industrial applications\u003c\/li\u003e\n\u003cli\u003eRX-only beacon - can receive ultrasonic, but can't transmit it\u003c\/li\u003e\n\u003cli\u003eVery solid compound-sealed IP67 level protection\u003c\/li\u003e\n\u003cli\u003eSpecial IP67-membrane for ultrasonic sensor\u003c\/li\u003e\n\u003cli\u003eExternal antenna with SMA connector for extended radio range\u003c\/li\u003e\n\u003cli\u003eCurrently, supports license-free 915MHz ISM band (US) and license-free SRD band 868MHz (EU). Future 433MHz HW variants may come in some months, but no firm schedule yet. You can place orders for 433MHz. When sufficient amount is collected, we will produce the 433MHz version as well\u003c\/li\u003e\n\u003cli\u003eTwo IP67 external connectors:\n\u003col\u003e\n\u003cli\u003ePower:\n\u003cul\u003e\n\u003cli\u003e+12V power supply (works from +6V to +15V)\u003c\/li\u003e\n\u003cli\u003eReset pin (different from early batch Industrial-TX and Industrial-RX - check with us, if you bought in Sep.2019 or earlier)\u003c\/li\u003e\n\u003cli\u003eDFU pin (different from early batch Industrial-TX and Industrial-RX - check with us, if you bought in Sep.2019 or earlier)\u003c\/li\u003e\n\u003cli\u003eGND\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInterfaces :\n\u003cul\u003e\n\u003cli\u003eRS485\u003c\/li\u003e\n\u003cli\u003eUART 3.3V\u003c\/li\u003e\n\u003cli\u003eUSB (TX+RX)\u003c\/li\u003e\n\u003cli\u003eGND\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003eCorresponding IP67 connectors (male part) included\u003c\/li\u003e\n\u003cli\u003eNo battery inside by default - external power bank or external power supply (+12V). Optional variant with internal battery is available on request\u003c\/li\u003e\n\u003cli\u003eExtended working temperature range: -40C…+50C (not tested, provided by design)\u003c\/li\u003e\n\u003cli\u003eEmbedded reset switch and DFU switch - magnetic control\u003c\/li\u003e\n\u003cli\u003eSupports wide range of ultrasonic frequencies: 19\/25\/31\/37\/45 kHz\u003c\/li\u003e\n\u003cli\u003eMost of all, designed to work together with Industrial-TX beacon. But can work along with Beacon HW v4.9 or Beacon Mini-TX or Super-Beacon. In all cases, the radio bands must match\u003c\/li\u003e\n\u003cli\u003eUltrasonic range - up to 30m with Industrial-TX beacon or Beacon HW v4.9. And up to 20m with Mini-TX beacons\u003c\/li\u003e\n\u003cli\u003eRadio range to modem - up to a few hundred meters in open space with full-size antennas\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marvelmind Robotics","offers":[{"title":"Default Title","offer_id":56578223767933,"sku":"5B4-8E7-AA3","price":59.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Marvelmind-Industrial-RX-5-scaled.jpg?v=1753831106"},{"product_id":"benewake-tf02-pro-lidar-rangefinder-ip65-40m","title":"Benewake TF02 Pro LIDAR Rangefinder IP65 (40m)","description":"\u003cp\u003e\n TF02-Pro is a single-point ranging LiDAR based on TF02 upgrade. The performance and accuracy of different reflectivity are improved, resulting in faster and more accurate range detection.\n\u003c\/p\u003e\n\u003cp\u003e\n Other improvements include user configurable I2C\/UART or I\/O interface and generally improved performance in terms of greater range, increased sensitivity and accuracy compared to the older generation TF02 Lidar units.\n\u003c\/p\u003e\n\u003ch2\u003e\n Key Features\n\u003c\/h2\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n \u003cli\u003e\n  Range of up to 40m outdoors\n \u003c\/li\u003e\n \u003cli\u003e\n  Fully enclosed IP65 unit\n \u003c\/li\u003e\n \u003cli\u003e\n  Ambient light resistance(Up to 100Klux)\n \u003c\/li\u003e\n \u003cli\u003e\n  High update rate(up to 1000Hz)\n \u003c\/li\u003e\n \u003cli\u003e\n  Low power consumption\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Datasheet and Product Manual\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/wp-content\/uploads\/2020\/01\/TF02-Pro-Product-Manual-Alpha.pdf\"\u003e\n   TF02-Pro Product Manual\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/wp-content\/uploads\/2020\/01\/TF02-Pro-Datasheet.pdf\"\u003e\n   TF02-Pro-Datasheet\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003c!-- mceItemMediaService_youtube:{\"id\":\"OHZHhBZF2SE\",\"width\":440,\"height\":330} --\u003e\n \u003c!-- do not directly edit this HTML, it will be overwritten by the mediaservice plugin --\u003e\n\u003c\/p\u003e\n\u003cdiv class=\"description rel\" id=\"description\"\u003e\n \u003cdiv class=\"dv-container\"\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"Benewake","offers":[{"title":"Default Title","offer_id":56578242412925,"sku":"592-BD8-843","price":71.4,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/TF02-Pro-1-scaled.jpg?v=1753831207"},{"product_id":"marvelmind-modem-hw-v5-1-sl4","title":"Marvelmind Modem HW v5.1","description":"\u003cp\u003e\n The router is the central controller of the system which calculates position of mobile beacon (\"hedgehog\") 16 times per second based on data from beacons. They communicate via USB with dashboard and with beacons wirelessly in ISM band.  This is the core of the Marvelmind indoor positioning kit.\n\u003c\/p\u003e\n\u003cp\u003e\n This modem is available in either a 868\/915Mhz radio (software switchable)\n\u003c\/p\u003e\n\u003ch2\u003e\n Modem v5.1 vs. Modem v4.9 comparison\n\u003c\/h2\u003e\n\u003cp\u003e\n Modem v5.1 is a newer and nearly in all aspects superior version of Modem v4.9. Modem v5.1 is recommended for new designs.\n\u003c\/p\u003e\n\u003cp\u003e\n Modem v4.9 will continue be supported in new SW releases. But all new SW features will be introduced to Modem v5.1 only.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-462257\" height=\"507\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/MMbeacon-comparison.jpg?v=1754234911\" width=\"618\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n * Gives up to 2 times longer range with equal other conditions. Can be limited due to certification. For example, the maximum allowed power for the TELEC T108 Japanese certification is +2dBm\n\u003c\/p\u003e\n\u003cp\u003e\n ** Gives up to 3.5 time longer range with equal other conditions. Can be limited by external noise or interference.\n\u003c\/p\u003e\n\u003ch1\u003e\n Key Features\n\u003c\/h1\u003e\n\u003cul\u003e\n \u003cli\u003e\n  High-precision (+-2cm) indoor navigation system for autonomous robots and systems (\"indoor GPS\")\n \u003c\/li\u003e\n \u003cli\u003e\n  Supports up to 250 beacons - mobile + stationary - in any combination\n \u003c\/li\u003e\n \u003cli\u003e\n  Indoor tracking and positioning of objects and humans equipped with beacons\n \u003c\/li\u003e\n \u003cli\u003e\n  Coverage radius of a beacon:up to 100 meters\n \u003c\/li\u003e\n \u003cli\u003e\n  Up to 1300h (\u0026gt;100 days with 12h\/day \u0026amp; 1Hz location update rate) in active mode when powered from battery. Up 2y in deep sleep mode\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n General Features of Marvelmind Indoor Positioning system\n\u003c\/h1\u003e\n\u003cul\u003e\n \u003cli\u003e\n  High-precision (+-2cm) indoor navigation system for autonomous robots and systems (\"indoor GPS\")\n \u003c\/li\u003e\n \u003cli\u003e\n  Indoor tracking and positioning of objects and humans equipped with beacons\n \u003c\/li\u003e\n \u003cli\u003e\n  Coverage radius of a beacon: up to 100 meters\n \u003c\/li\u003e\n \u003cli\u003e\n  Supports USB, UART, SPI and I2C interfaces on mobile beacon\n \u003c\/li\u003e\n \u003cli\u003e\n  Radio interface: 868\/915Mhz up to 100m in office environment\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Marvelmind Robotics","offers":[{"title":"Default Title","offer_id":56578245493117,"sku":"D02-9B5-81B","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/mav-modem-01-scaled.jpg?v=1753831226"},{"product_id":"sensecap-k1100-iot-ai-vision-prototyping-kit","title":"SenseCAP K1100 IoT AI Vision Prototyping Kit","description":"\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli class=\"paragraph text-align-type-left pap-line-1 pap-line-rule-auto pap-spacing-before-3pt pap-spacing-after-3pt\"\u003e\n  \u003cstrong\u003e\n   Deploy in 10 Minutes\n  \u003c\/strong\u003e\n  : Build an AIoT project through 3 steps in 10 minutes\n \u003c\/li\u003e\n \u003cli class=\"paragraph text-align-type-left pap-line-1 pap-line-rule-auto pap-spacing-before-3pt pap-spacing-after-3pt\"\u003e\n  \u003cstrong\u003e\n   Advanced Technologies\n  \u003c\/strong\u003e\n  : Combination of Machine Learning, LoRa® technology, and pre-trained embedded AI Vision Sensor\n \u003c\/li\u003e\n \u003cli class=\"paragraph text-align-type-left pap-line-1 pap-line-rule-auto pap-spacing-before-3pt pap-spacing-after-3pt\"\u003e\n  \u003cstrong\u003e\n   Great Extensibility\n  \u003c\/strong\u003e\n  : Compatible with 400+ Grove sensors to support extensive applications and customization options\n \u003c\/li\u003e\n \u003cli class=\"paragraph text-align-type-left pap-line-1 pap-line-rule-auto pap-spacing-before-3pt pap-spacing-after-3pt\"\u003e\n  \u003cstrong\u003e\n   Broad Integration\n  \u003c\/strong\u003e\n  : Compatible with mainstream platforms for Cloud support\n \u003c\/li\u003e\n \u003cli class=\"paragraph text-align-type-left pap-line-1 pap-line-rule-auto pap-spacing-before-3pt pap-spacing-after-3pt\"\u003e\n  \u003cstrong\u003e\n   Open-source Platform\n  \u003c\/strong\u003e\n  : Compatible with beginner-friendly programming platforms enabling the co-creation of IoT sensors\n \u003c\/li\u003e\n \u003cli class=\"paragraph text-align-type-left pap-line-1 pap-line-rule-auto pap-spacing-before-3pt pap-spacing-after-3pt\"\u003e\n  \u003cstrong\u003e\n   Upgradable to Industrial Sensors\n  \u003c\/strong\u003e\n  : Gateway to the higher-end SenseCAP series of outdoor sensors for industrial usage\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-649045\" height=\"460\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/k1100-deploy.webp?v=1754236205\" width=\"1200\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n With the rise of the internet of things and big data, the acquisition of massive amounts of data through sensors prior to any transformation is essential for any industry. Frankly speaking, the solution provided by Sensecap is what the market needs. Just take a look at typical sensors and modules included in the kit and you will understand why. The kit includes a Wio terminal that is compatible with both Arduino and Raspberry Pi, so that is the simplest part to set up. A diversity sensor enables multiple detection and makes the product more versatile. The AI vision sensor allows for emotion recognition. A LoRa-enabled and low-energy module facilitates long-distance data transmission and solves the problems of low powered and small-scale applications. After connecting, your LoRa-based wireless sensing system, equipped with all essential sensors and devices, is ready to go.\n\u003c\/p\u003e\n\u003cp\u003e\n The AI Sensor of SenseCAP K1100 is designed for always on object detection out of the box. It features ready-to-use and configurable Grove-Vision AI Sensor for users to detect objects with a ability to add custom deep learning model. Users can directly import models from other platforms.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003c\/p\u003e\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 10px 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/TkgyFciADq4\" frameborder=\"0\" allowfullscreen style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u0026amp;feature=emb_title\n\n\u003cp\u003e\n SenseCAP K1100, a plug and play platform, provides the most convenient and quick solution for integrating devices and cloud systems. With minimal wiring and no soldering required, the kit provides a smart and cost effective solution for people with different skill levels to make DIY sensor — the IoT solution, which is best for smart device market, in 10 minutes. Easy integration and comprehensive Cloud support make SENSEFUN the newest player in the AIoT arena.\n\u003c\/p\u003e\n\u003cp\u003e\n LoRa® is the go-to technology for IoT projects. Wio E5 is the one to empower the kit to have long-distance wireless connectivity with a wide frequency range. It enables users to leverage LoRaWAN® - a high-security and globally standardized wireless network to transmit data in low power and cost-effective ways.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-649042\" height=\"460\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Grove-Ecosystem.webp?v=1754236208\" width=\"1200\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n The Seeed's\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product-category\/maker\/grove\/\"\u003e\n  Grove Sensors \u0026amp; module ecosystem\n \u003c\/a\u003e\n are compatible with the SenseCAP K1100.   contains 2 Grove interfaces on the board so that users can build diverse projects with any Grove sensors they need.\n\u003c\/p\u003e\n\u003ch2\u003e\n Cloud Integration\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-649043\" height=\"460\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Sensecap-IOT.webp?v=1754236210\" width=\"1200\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n SenseCAP K1100 is integrated with a wide range of cloud services, making it a powerful toolkit for developers to build projects in various ecosystems. Users can easily connect the device to Helium, Azure, SenseCAP, and other mainstream platforms to obtain Cloud support.  As for SenseCAP Console, SenseCAP K1100 offers free data credit usage for 1 year while providing access to the minimized uploading intervals - 5 minutes.\n\u003c\/p\u003e\n\u003ch3 class=\"paragraph text-align-type-justify pap-line-1.3 pap-line-rule-auto pap-spacing-before-3pt pap-spacing-after-3pt\"\u003e\n Open-source Platform\n\u003c\/h3\u003e\n\u003cp\u003e\n SenseCAP K1100 is an open-source prototype kit designed to incentivize the co-creation of IoT sensors to tackle real-world challenges. It is compatible with easy-to-start programming platforms like Arduino for customized coding. In addition, users can also train the Wio Terminal TinyML models using in-builds and Grove sensors.\n\u003c\/p\u003e\n\u003cp\u003e\n All the software and hardware in SenseCAP K1100 are open-source with the MIT license. Users can freely develop their products based on the documents we provide and submit their ideas to contribute to the open-source software platform:\n \u003cstrong\u003e\n  \u003ca href=\"https:\/\/github.com\/Seeed-Studio\/SenseCraft\" rel=\"noopener\" target=\"_blank\"\u003e\n   SenseCraft\n  \u003c\/a\u003e\n \u003c\/strong\u003e\n .\n\u003c\/p\u003e\n\u003cp\u003e\n Check out the winners' projects from the \"\n \u003cstrong\u003e\n  \u003ca href=\"https:\/\/www.hackster.io\/contests\/iotinthewild\" rel=\"noopener\" target=\"_blank\"\u003e\n   IoT into the Wild\n  \u003c\/a\u003e\n \u003c\/strong\u003e\n \" contest to meet like-minded people worldwide - all motivated to use IoT, AI, and Edge Computing to solve real-life challenges, such as wildlife, biodiversity, and environmental conservation.\n\u003c\/p\u003e\n\u003ch3 class=\"paragraph text-align-type-justify pap-line-1.3 pap-line-rule-auto pap-spacing-before-3pt pap-spacing-after-3pt\"\u003e\n Upgradable to Industrial Grade Sensors\n\u003c\/h3\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-649044\" height=\"454\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/sensecap-sensors.webp?v=1754236212\" width=\"1195\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n SenseCAP K1100 serves as a gateway to the higher-end SenseCAP LoRaWAN® series of industrial outdoor sensors. Users can prototype multiple AIoT applications with this kit, after which they can scale them up to the robust, long-life, and industrial\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product-tag\/sensecap-mx\/\"\u003e\n  \u003cstrong\u003e\n   SenseCAP sensors\n  \u003c\/strong\u003e\n \u003c\/a\u003e\n .\n\u003c\/p\u003e\n\u003ch2 class=\"paragraph text-align-type-left pap-line-1 pap-line-rule-auto pap-spacing-before-3pt pap-spacing-after-3pt\"\u003e\n Resource and Recommendation\n\u003c\/h2\u003e\n\u003cp\u003e\n For SenseCAP K1100, we provide abundant product documentation and recommended content for reference in\n \u003cstrong\u003e\n  \u003ca href=\"https:\/\/wiki.seeedstudio.com\/K1100-Getting-Started\/#catalogue\" rel=\"noopener\" target=\"_blank\"\u003e\n   Seeed Studio wiki\n  \u003c\/a\u003e\n \u003c\/strong\u003e\n . Check the links below for materials support.\n\u003c\/p\u003e\n\u003cdiv\u003e\n \u003cdiv class=\"document\"\u003e\n  \u003cdiv class=\"document\"\u003e\n   \u003cdiv class=\"right-desc\" data-style=\"display: table-cell; vertical-align: middle; padding-left: 15px; box-sizing: border-box; width: calc(95% - 38px);\"\u003e\n    \u003cp\u003e\n     \u003cstrong\u003e\n      Instruction on connecting devices to the SenseCAP Cloud:\n     \u003c\/strong\u003e\n    \u003c\/p\u003e\n   \u003c\/div\u003e\n   \u003cul\u003e\n    \u003cli data-style=\"text-align: left;\"\u003e\n     \u003ca href=\"https:\/\/sensecap-docs.seeed.cc\/quickstart.html\" rel=\"noopener\" target=\"_blank\"\u003e\n      \u003cstrong\u003e\n       Quick Start with SenseCAP Portal\n      \u003c\/strong\u003e\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003cstrong\u003e\n      \u003ca href=\"https:\/\/sensecap-docs.seeed.cc\/introduction.html\" rel=\"noopener\" target=\"_blank\"\u003e\n       Quick Start with SenseCAP API\n      \u003c\/a\u003e\n     \u003c\/strong\u003e\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cdiv class=\"right-desc\" data-style=\"display: table-cell; vertical-align: middle; padding-left: 15px; box-sizing: border-box; width: calc(95% - 38px);\"\u003e\n    \u003cp\u003e\n     \u003cstrong\u003e\n      Instructions on Arduino sensors programming:\n     \u003c\/strong\u003e\n    \u003c\/p\u003e\n   \u003c\/div\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     \u003ca href=\"https:\/\/wiki.seeedstudio.com\/K1100-Soil-Moisture-Sensor-Grove-LoRa-E5\/\" rel=\"noopener\" target=\"_blank\"\u003e\n      \u003cstrong\u003e\n       Grove Soil Moisture Sensors\n      \u003c\/strong\u003e\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003cstrong\u003e\n      \u003ca href=\"https:\/\/wiki.seeedstudio.com\/K1100-VOC-and-eCO2-Gas-Sensor-Grove-LoRa-E5\/\" rel=\"noopener\" target=\"_blank\"\u003e\n       Grove VOC and eCO2 Gas Sensor (SGP30)\n      \u003c\/a\u003e\n     \u003c\/strong\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003cstrong\u003e\n      \u003ca href=\"https:\/\/wiki.seeedstudio.com\/K1100-Temp-Humi-Sensor-Grove-LoRa-E5\/\" rel=\"noopener\" target=\"_blank\"\u003e\n       Grove Temp \u0026amp; Humi Sensor (SHT40)\n      \u003c\/a\u003e\n     \u003c\/strong\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003cstrong\u003e\n      \u003ca href=\"https:\/\/wiki.seeedstudio.com\/K1100-Vision-AI-Module-Grove-LoRa-E5\/\" rel=\"noopener\" target=\"_blank\"\u003e\n       Grove Vision AI Module\n      \u003c\/a\u003e\n     \u003c\/strong\u003e\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cdiv class=\"right-desc\" data-style=\"display: table-cell; vertical-align: middle; padding-left: 15px; box-sizing: border-box; width: calc(95% - 38px);\"\u003e\n    \u003cp\u003e\n     \u003cstrong\u003e\n      Start the IoT journey with a free lesson curriculum from Azure Cloud Advocates:\n     \u003c\/strong\u003e\n    \u003c\/p\u003e\n   \u003c\/div\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     \u003ca href=\"https:\/\/wiki.seeedstudio.com\/K1100-Soil-Moisture-Sensor-Grove-LoRa-E5\/\" rel=\"noopener\" target=\"_blank\"\u003e\n      \u003cstrong\u003e\n       IoT for Beginners with Seeed and Microsoft\n      \u003c\/strong\u003e\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003ch2 class=\"paragraph text-align-type-left pap-line-1.3 pap-line-rule-auto pap-spacing-before-3pt pap-spacing-after-3pt\"\u003e\n    Parts List\n   \u003c\/h2\u003e\n   \u003cdiv align=\"left\" dir=\"ltr\"\u003e\n    \u003ctable data-style=\"height: 368px; width: 960px;\"\u003e\n     \u003ccolgroup\u003e\n      \u003ccol width=\"465\"\u003e\n      \u003ccol width=\"65\"\u003e\n     \u003c\/colgroup\u003e\n     \u003ctbody\u003e\n      \u003ctr data-style=\"height: 46px;\"\u003e\n       \u003ctd data-style=\"height: 46px; width: 831.234px;\"\u003e\n        \u003cp dir=\"ltr\"\u003e\n         Wio Terminal\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n       \u003ctd data-style=\"height: 46px; width: 112.766px;\"\u003e\n        \u003cp data-style=\"text-align: center;\" dir=\"ltr\"\u003e\n         1\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr data-style=\"height: 46px;\"\u003e\n       \u003ctd data-style=\"height: 46px; width: 831.234px;\"\u003e\n        \u003cp dir=\"ltr\"\u003e\n         Grove - Wio-E5\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n       \u003ctd data-style=\"height: 46px; width: 112.766px;\"\u003e\n        \u003cp data-style=\"text-align: center;\" dir=\"ltr\"\u003e\n         1\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr data-style=\"height: 46px;\"\u003e\n       \u003ctd data-style=\"height: 46px; width: 831.234px;\"\u003e\n        \u003cp dir=\"ltr\"\u003e\n         Grove - VOC and eCO2 Gas Sensor SGP30\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n       \u003ctd data-style=\"height: 46px; width: 112.766px;\"\u003e\n        \u003cp data-style=\"text-align: center;\" dir=\"ltr\"\u003e\n         1\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr data-style=\"height: 46px;\"\u003e\n       \u003ctd data-style=\"height: 46px; width: 831.234px;\"\u003e\n        \u003cp dir=\"ltr\"\u003e\n         Grove - Soil Moisture Sensor\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n       \u003ctd data-style=\"height: 46px; width: 112.766px;\"\u003e\n        \u003cp data-style=\"text-align: center;\" dir=\"ltr\"\u003e\n         1\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr data-style=\"height: 46px;\"\u003e\n       \u003ctd data-style=\"height: 46px; width: 831.234px;\"\u003e\n        \u003cp dir=\"ltr\"\u003e\n         Grove - Temp\u0026amp;Humi Sensor(SHT40)\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n       \u003ctd data-style=\"height: 46px; width: 112.766px;\"\u003e\n        \u003cp data-style=\"text-align: center;\" dir=\"ltr\"\u003e\n         1\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr data-style=\"height: 46px;\"\u003e\n       \u003ctd data-style=\"height: 46px; width: 831.234px;\"\u003e\n        \u003cp dir=\"ltr\"\u003e\n         \u003ca href=\"https:\/\/www.seeedstudio.com\/Grove-Vision-AI-Module-p-5457.html\"\u003e\n          Grove - Vision AI Module\n         \u003c\/a\u003e\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n       \u003ctd data-style=\"height: 46px; width: 112.766px;\"\u003e\n        \u003cp data-style=\"text-align: center;\" dir=\"ltr\"\u003e\n         1\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr data-style=\"height: 46px;\"\u003e\n       \u003ctd data-style=\"height: 46px; width: 831.234px;\"\u003e\n        \u003cp dir=\"ltr\"\u003e\n         Grove - Cable\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n       \u003ctd data-style=\"height: 46px; width: 112.766px;\"\u003e\n        \u003cp data-style=\"text-align: center;\" dir=\"ltr\"\u003e\n         4\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr data-style=\"height: 46px;\"\u003e\n       \u003ctd data-style=\"height: 46px; width: 831.234px;\"\u003e\n        \u003cp dir=\"ltr\"\u003e\n         Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n       \u003ctd data-style=\"height: 46px; width: 112.766px;\"\u003e\n        \u003cp data-style=\"text-align: center;\" dir=\"ltr\"\u003e\n         1\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n       \u003ctd data-style=\"width: 831.234px;\"\u003e\n        \u003cp dir=\"ltr\"\u003e\n         USB Cable - Type C\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n       \u003ctd data-style=\"width: 112.766px;\"\u003e\n        \u003cp data-style=\"text-align: center;\" dir=\"ltr\"\u003e\n         1\n        \u003c\/p\u003e\n       \u003c\/td\u003e\n      \u003c\/tr\u003e\n     \u003c\/tbody\u003e\n    \u003c\/table\u003e\n   \u003c\/div\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578246377853,"sku":"110991748","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/SenseCap-K1100-4.jpg?v=1753831228"},{"product_id":"matek-digital-airspeed-sensor-as-dlvr-i2c","title":"Matek Digital Airspeed Sensor AS-DLVR-I2C","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll DLVR series is the best airspeed sensor ArduPilot currently support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSensor: All sensors DLVR-L10D, Industrial temperature range\u003c\/li\u003e\n\u003cli\u003eDLVR-L10D Sensor\u003c\/li\u003e\n\u003cli\u003eInterface: I2C (SCL \u0026amp; SDA)\u003c\/li\u003e\n\u003cli\u003eSensor I2C address: 0x28\u003c\/li\u003e\n\u003cli\u003ePressure Ranges: 2500Pa\u003c\/li\u003e\n\u003cli\u003eMaximum Pressure: 75kPa\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -25°C ~ 85°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eBoard Supply voltage: 4~5.5V DC\u003c\/li\u003e\n\u003cli\u003eWorking current: 5mA\u003c\/li\u003e\n\u003cli\u003eRed LED: 3.3V power indicator\u003c\/li\u003e\n\u003cli\u003eJST-GH sequence: 5V, SCL, SDA, GND\u003c\/li\u003e\n\u003cli\u003eWeight: 3.5g (sensor board)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x AS-DLVR-I2C Sensor Board.\u003c\/li\u003e\n\u003cli\u003e1x JST-GH-4P to JST-GH-4P 20cm silicon wire\u003c\/li\u003e\n\u003cli\u003ePitot Tube.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWiring\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5V to FC 4~5.5V\u003c\/li\u003e\n\u003cli\u003eSCL to FC I2C_SCL\u003c\/li\u003e\n\u003cli\u003eSDA to FC I2C_SDA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eG to FC GND\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eClear silicon tubing 40cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eParameters\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduPilot: ARSPD_TYPE = 9 (I2C-DLVR-10in)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578255290749,"sku":"M-AS-DLVR-I2C","price":70.49,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Digital-Airspeed-Sensor-AS-DLVR-I2C.jpg?v=1753831308"},{"product_id":"matek-hall-current-sensor-150a","title":"Matek Hall Current Sensor 150A","description":"\u003ch3\u003e\n Sspecifications\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Hall effect current sensor\n \u003c\/li\u003e\n \u003cli\u003e\n  No voltage drop and heat on current sensor components\n \u003c\/li\u003e\n \u003cli\u003e\n  Offset and Sensitivity are calibrated in factory\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous current rating: 0~150A DC\n \u003c\/li\u003e\n \u003cli\u003e\n  Sensitivity: 20mV\/A,  INAV\/BF scale = 200,  ArduPilot BATT_AMP_PERVLT = 50\n \u003c\/li\u003e\n \u003cli\u003e\n  VBAT voltage sense: 0~69V,  INAV scale = 2100,  BF scale = 210, ArduPilot BATT_VOLT_MULT = 21.0\n \u003c\/li\u003e\n \u003cli\u003e\n  Power Consumption: 17mA\n \u003c\/li\u003e\n \u003cli\u003e\n  Voltage offset error at zero current : +-10mV\n \u003c\/li\u003e\n \u003cli\u003e\n  Curr output voltage error: 5%\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan data-slate-fragment=\"JTdCJTIyb2JqZWN0JTIyJTNBJTIyZG9jdW1lbnQlMjIlMkMlMjJkYXRhJTIyJTNBJTdCJTdEJTJDJTIybm9kZXMlMjIlM0ElNUIlN0IlMjJvYmplY3QlMjIlM0ElMjJibG9jayUyMiUyQyUyMnR5cGUlMjIlM0ElMjJwYXJhZ3JhcGglMjIlMkMlMjJpc1ZvaWQlMjIlM0FmYWxzZSUyQyUyMmRhdGElMjIlM0ElN0IlN0QlMkMlMjJub2RlcyUyMiUzQSU1QiU3QiUyMm9iamVjdCUyMiUzQSUyMnRleHQlMjIlMkMlMjJsZWF2ZXMlMjIlM0ElNUIlN0IlMjJvYmplY3QlMjIlM0ElMjJsZWFmJTIyJTJDJTIydGV4dCUyMiUzQSUyMk9wZXJhdGluZyUyMFRlbXBlcmF0dXJlcyUyMiUyQyUyMm1hcmtzJTIyJTNBJTVCJTVEJTdEJTVEJTdEJTVEJTdEJTVEJTdE\"\u003e\n   Operating Temperatures: -30~80 °C\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  23 * 20* 23mm, 7g\n \u003c\/li\u003e\n \u003cli\u003e\n  step file\n  \u003ca href=\"http:\/\/www.mateksys.com\/downloads\/other\/HCS-150A_step.zip\" rel=\"noopener\" target=\"_blank\"\u003e\n   HCS-150A_step.zip\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Pinout\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Vbat: for voltage sense, support 0~69V IN\n \u003c\/li\u003e\n \u003cli\u003e\n  Volt: = 1\/21 Vbat, 0~3.3V out\n \u003c\/li\u003e\n \u003cli\u003e\n  Curr: Current signal, 0~3.3V out\n \u003c\/li\u003e\n \u003cli\u003e\n  5V: power supply for HCS-150A board, support 4~13V IN, 17mA\n \u003c\/li\u003e\n \u003cli\u003e\n  G: GND\n \u003c\/li\u003e\n \u003cli\u003e\n  TX\/RX: for firmware update and configure (to be supported)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-633443\" height=\"1418\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Matek-150A-Hall-Current-Sensor-3_964feb2d-8a0d-4360-b8e6-9e55288c548f.webp?v=1754235019\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003e\n Tips\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  mount Hall sensor far from iron and magnetic material\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Included\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1 x Matek Hall Effect Current Sensor 150A\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578259222909,"sku":"M-HS150A","price":14.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Matek-150A-Hall-Current-Sensor-2.webp?v=1753831336"},{"product_id":"matek-digital-airspeed-sensor-aspd-dlvr-l431-can-i2c-uavcan","title":"Matek Digital AirSpeed Sensor (ASPD-DLVR-L431, CAN, I2C, UAVCAN)","description":"\u003cp\u003e\n The Matek Digital Airspeed Sensor ASPD-DLVR features CAN JST-GH connector, UAVCAN Protocol UART1, UART2, UART13 among many other cool features!\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-745705\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Matek-ASPD-DLVR-L431-2.jpg?v=1754234933\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Specifications \u0026amp; Features\n \u003c\/li\u003e\n \u003cli\u003e\n  ArduPilot AP_Periph F303 CAN node\n \u003c\/li\u003e\n \u003cli\u003e\n  All sensors DLVR-L10D, Industrial temperature range\n \u003c\/li\u003e\n \u003cli\u003e\n  CAN \u0026amp; I2C Interface\n \u003c\/li\u003e\n \u003cli\u003e\n  Typical Platforms: Fixed-Wing, QuadPlane, VTOL\n \u003c\/li\u003e\n \u003cli\u003e\n  CAN JST-GH connector, UAVCAN Protocol\n \u003c\/li\u003e\n \u003cli\u003e\n  I2C JST-GH connector, DLVR-L10D I2C mode (I2C address 0x28)\n \u003c\/li\u003e\n \u003cli\u003e\n  UART1, Firmware update\n \u003c\/li\u003e\n \u003cli\u003e\n  UART2, Spare for external GPS\n \u003c\/li\u003e\n \u003cli\u003e\n  UART3, MSP Protocol (To be supported)\n \u003c\/li\u003e\n \u003cli\u003e\n  CAN bootloader LED, Blue\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli style=\"list-style-type: none;\"\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Fast blinking, No communication between CAN node and Flight Controllers\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Slow blinking, Communicating between CAN node and Flight Controllers\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  3.3V Power LED, Red\n \u003c\/li\u003e\n \u003cli\u003e\n  Input voltage range: 4~6V\n \u003c\/li\u003e\n \u003cli\u003e\n  Power consumption: 60mA\n \u003c\/li\u003e\n \u003cli\u003e\n  Operating Temperatures: -20°C to 85°C\n \u003c\/li\u003e\n \u003cli\u003e\n  Pressure Range: 2500Pa (± 10 inH2O)\n \u003c\/li\u003e\n \u003cli\u003e\n  Burst Pressure: 75kPa\n \u003c\/li\u003e\n \u003cli\u003e\n  Speed Range: ±250 km\/h\n \u003c\/li\u003e\n \u003cli\u003e\n  22mm*22mm*12.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  4g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Wiring Diagram\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-423451\" height=\"1538\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/ASPD-DLVR_wiring_2.jpg?v=1754234936\" width=\"1000\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1 x ASPD-DLVR\n \u003c\/li\u003e\n \u003cli\u003e\n  2 x JST-GH-4P to JST-GH-4P 20cm silicon wire\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578260369789,"sku":"826-DBA-458","price":85.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/matek_digital_airspeed_sensor_aspd-dlvr_can_i2c_uavcan_3.jpg?v=1753831349"},{"product_id":"sparkfun-qwiic-tof-imager-vl53l5cx","title":"SparkFun Qwiic ToF Imager - VL53L5CX","description":"\u003cp\u003e\n Multizone distance measurements up to 4000mm are possible across all 64 zones with a wide 63° diagonal field-of-view which can be read up to 15Hz. Thanks to ST Histogram patented algorithms, the VL53L5CX is able to detect different objects within the FoV. The Histogram also provides immunity to cover glass crosstalk beyond 60cm.\n\u003c\/p\u003e\n\u003cp\u003e\n Ideal for 3D room mapping, obstacle detection for robotics, gesture recognition, IoT, laser-assisted autofocus, and AR\/VR enhancement, the Qwiic connector on this sensor makes integration easy.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-568059\" height=\"648\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/VL53L5CX_Depth_Map_Example_ddfae14c-0f76-42c8-be1c-2405c7b7bf6a.gif?v=1754236567\" width=\"692\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Multizone ranging output with either 4x4 or 8x8 separate zones\n \u003c\/li\u003e\n \u003cli\u003e\n  Autonomous Low-power mode with interrupt programmable threshold to wake up the host\n \u003c\/li\u003e\n \u003cli\u003e\n  Up to 400 cm ranging\n \u003c\/li\u003e\n \u003cli\u003e\n  60 Hz frame rate capability\n \u003c\/li\u003e\n \u003cli\u003e\n  Emitter: 940 nm invisible light vertical cavity surface emitting laser (VCSEL) and integrated analog driver\n \u003c\/li\u003e\n \u003cli\u003e\n  63 ° diagonal square FoV using diffractive optical elements (DOE) on both transmitter and receiver\n \u003c\/li\u003e\n \u003cli\u003e\n  Operating Voltage: 3.3V\n \u003c\/li\u003e\n \u003cli\u003e\n  I\n  \u003csup\u003e\n   2\n  \u003c\/sup\u003e\n  C Address: 0x52\n \u003c\/li\u003e\n \u003cli\u003e\n  2x Qwiic Connectors\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/9\/d\/3\/f\/e\/SparkFun_Qwiic_ToF_Imager_-_VL53L5CX_Schematic.pdf\"\u003e\n   Schematic\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/e\/8\/1\/4\/6\/18642-EagleFiles.zip\"\u003e\n   Eagle Files\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/2\/0\/0\/2\/BoardOutline.png\"\u003e\n   Board Dimensions\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/2002\"\u003e\n   Hookup Guide\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/6\/e\/3\/0\/6\/vl53l5cx-datasheet.pdf\"\u003e\n   Datasheet\n  \u003c\/a\u003e\n  (VL53L5CX)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003e\n   Qwiic Info Page\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_VL53L5CX_Arduino_Library\"\u003e\n   Arduino Library\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_Qwiic_ToF_Imager_VL53L5CX\"\u003e\n   GitHub Hardware Repo\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":56578270167421,"sku":"SEN-18642","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/18642-SparkFun_Qwiic_ToF_Imager_-_VL53L5CX-01.jpg?v=1753831415"},{"product_id":"sparkfun-distance-sensor-1-3-meter-vl53l4cd-qwiic","title":"SparkFun Distance Sensor - 1.3 Meter, VL53L4CD (Qwiic)","description":"\u003cp\u003e\n To make it even easier to get your readings, all communication is enacted exclusively via I2C, utilizing our handy Qwiic system so no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1\"-spaced pins in case you prefer to use a breadboard.\n\u003c\/p\u003e\n\u003cp\u003e\n Each VL53L4CD sensor features a precision to be 1mm with an accuracy around +\/-7mm (white target: 88%, indoor, no infrared) and a minimum read distance of this sensor is 1mm. The field of view for this little breakout has a typical full field of view of 18° with a read rate of up to 100Hz. Make sure to power this board appropriately since it will need 2.6V-3.5V to operate. Lastly, please be sure to remove the protective sticker on the VL53L4CD before use otherwise it will, most assuredly, throw off your readings.\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Operating Voltage\n  \u003cul\u003e\n   \u003cli\u003e\n    2.6V to 3.5V\n   \u003c\/li\u003e\n   \u003cli\u003e\n    (typically\n    \u003cstrong\u003e\n     3.3V\n    \u003c\/strong\u003e\n    via Qwiic cable)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Average Current Consumption\n  \u003cul\u003e\n   \u003cli\u003e\n    22mA typically\n   \u003c\/li\u003e\n   \u003cli\u003e\n    24mA max\n   \u003c\/li\u003e\n   \u003cli\u003e\n    40mA peak current (including VSCEL)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Measurement Range: 1mm to 1300mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Resolution: ±1mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Light Source: Class 1 940nm VCSEL\n \u003c\/li\u003e\n \u003cli\u003e\n  Field of View: 18°\n \u003c\/li\u003e\n \u003cli\u003e\n  Max Read Rate: 100Hz\n \u003c\/li\u003e\n \u003cli\u003e\n  2x Qwiic Connectors\n \u003c\/li\u003e\n \u003cli\u003e\n  7-bit unshifted I\n  \u003csup\u003e\n   2\n  \u003c\/sup\u003e\n  C Address: 0x29\n \u003c\/li\u003e\n \u003cli\u003e\n  Operating Temperature Range\n  \u003cul\u003e\n   \u003cli\u003e\n    -30°C to +85°C\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Power LED\n \u003c\/li\u003e\n \u003cli\u003e\n  Jumpers\n  \u003cul\u003e\n   \u003cli\u003e\n    Pull-up Resistors\n   \u003c\/li\u003e\n   \u003cli\u003e\n    LED\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Note:\n \u003c\/strong\u003e\n The I\n \u003csup\u003e\n  2\n \u003c\/sup\u003e\n C address of the VL53L1X is 0x29 and is hardware defined. A multiplexer\/Mux is required to communicate to multiple VL53L1X sensors on a single bus. If you need to use more than one VL53L1X sensor consider using the Qwiic Mux Breakout.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Note:\n \u003c\/strong\u003e\n \u003ca href=\"http:\/\/en.wikipedia.org\/wiki\/Laser_safety#Class_1\"\u003e\n  CLASS 1\n \u003c\/a\u003e\n LASER PRODUCT CLASSIFIED IEC 60825-1 2014.\n\u003c\/p\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/9\/4\/2\/b\/a\/SparkFun_Qwiic_Distance_Sensor_VL53L4CD_Schematic.pdf\"\u003e\n   Schematic\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/6\/6\/9\/8\/4\/SparkFun_Qwiic_Distance_Sensor_-_VL53L4CD.zip\"\u003e\n   Eagle Files\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/4\/b\/e\/b\/d\/SparkFun_Qwiic_Distance_Sensor-VL53L4CD_Board_Dimensions.png\"\u003e\n   Board Dimensions\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/qwiic-distance-sensor-vl53l1x-vl53l4cd-hookup-guide\"\u003e\n   Hookup Guide\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/d\/b\/b\/7\/c\/vl53l4cd.pdf\"\u003e\n   Datasheet\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/f\/a\/3\/a\/0\/um2931-a-guide-to-using-the-vl53l4cd-ultra-lite-driver-uld-stmicroelectronics.pdf\"\u003e\n   User Manual\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003e\n   Qwiic Info Page\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_VL53L1X_Arduino_Library\"\u003e\n   Arduino Library\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/sparkfun\/Qwiic_VL53L1X_Py\"\u003e\n   Python Package\n  \u003c\/a\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    \u003ca href=\"https:\/\/qwiic-vl53l1x-py.readthedocs.io\/en\/latest\/\"\u003e\n     ReadtheDocs Documentation\n    \u003c\/a\u003e\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_Qwiic_Distance_Sensor-VL53L4CD\"\u003e\n   GitHub Hardware Repo\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":56578270364029,"sku":"SEN-18993","price":20.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/18993-SparkFun_Distance_Sensor_-_1.3_Meter__VL53L4CD__Qwiic_-01.jpg?v=1753831417"},{"product_id":"grove-amg8833-8x8-infrared-thermal-temperature-sensor-array","title":"Grove - AMG8833 8x8 Infrared Thermal Temperature Sensor Array","description":"\u003cp\u003e\n \u003cspan data-style=\"font-family: OpenSans; font-size: 16px;\"\u003e\n  Grove - AMG8833 8x8 Infrared Thermal Temperature Sensor Array is a high precision infrared array sensor based on advanced MEMS technology.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n This sensor can measure temperatures ranging from 0°C to 80°C (32°F to 176°F) and provide the accuracy of +- 2.5°C (4.5°F).\n \u003cspan data-style=\"font-family: OpenSans; font-size: 16px;\"\u003e\n  It can support temperature detection of the two-dimensional area of 8 × 8 (64 pixels) and a maximum 7 meters detection distance.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan data-style=\"font-family: OpenSans; font-size: 16px;\"\u003e\n  We provide both Arduino and Raspberry Pi demo for this sensor. It will be a perfect module to make your own thermal camera\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n \u003cli\u003e\n  \u003cspan data-style=\"font-size: 12px;\"\u003e\n   Temperature detection of the two-dimensional area: 8 × 8 (64 pixels)\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Temperature range of measuring object: 0 °C to 80 °C +32 °F to +176 °F\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan data-style=\"font-size: 12px;\"\u003e\n   I2C output (capability of temperature value output)\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan data-style=\"font-size: 12px;\"\u003e\n   High precision\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan data-style=\"font-size: 12px;\"\u003e\n   Long detection distance\n  \u003c\/span\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003c\/p\u003e\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 10px 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/NG0E-qs8zgQ\" frameborder=\"0\" allowfullscreen style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/SeeedDocument\/Grove-Infrared_Temperature_Sensor_Array-AMG8833\/raw\/master\/res\/Grove%20-%20Infrared%20Array%20Sensor%20(AMG8833).zip\"\u003e\n   Grove Infrared Temperature Sensor Array(AMG8833)Eaglefile\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/Seeed-Studio\/Seeed_AMG8833\/archive\/master.zip\"\u003e\n   Seeed AMG8833 Arduino library\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/Seeed-Studio\/Seeed_AMG8833_Raspberry_Python\/archive\/master.zip\"\u003e\n   Seeed AMG8833 Python library\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/SeeedDocument\/Grove-Infrared_Temperature_Sensor_Array-AMG8833\/raw\/master\/res\/AMG88.pdf\"\u003e\n   AMG8833 datasheet\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/github.com\/SeeedDocument\/Grove-Infrared_Temperature_Sensor_Array-AMG8833\/raw\/master\/res\/XC6206.pdf\"\u003e\n   XC6206 datasheet\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578270626173,"sku":"98C-787-9E0","price":49.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Grove-AMG8833.jpg?v=1753831421"},{"product_id":"grove-gps-air530","title":"Grove - GPS (Air530)","description":"\u003cdiv class=\"block\"\u003e\n \u003cdiv class=\"dv-container\"\u003e\n  \u003cdiv class=\"des-con\"\u003e\n   \u003cp\u003e\n    Confused about your GPS not working well in urban or outsides under only one or a few satellite module? Then you should not miss our new Grove-GPS (Air530). It's a high-performance, highly integrated multi-mode satellite positioning and navigation module to use with Arduino. It supports GPS \/ Beidou \/ Glonass \/ Galileo \/ QZSS \/ SBAS, which makes it suitable for GNSS positioning applications such as car navigation, smart wear, and drone. Meanwhile, this module is capable of receiving more than 6 satellites at the same time and is able to work excellently even if there's a very bad signal.\n   \u003c\/p\u003e\n   \u003ch2\u003e\n    Features\n   \u003c\/h2\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     Positioning error within 10 meters\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Multi-mode satellite positioning \u0026amp; navigation and support more than 6 satellites at the same time\n    \u003c\/li\u003e\n    \u003cli\u003e\n     The position still quickly and accurately under the condition of bad signal\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Low power consumption at only 31uA\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Compatible hard\/soft interface for other modules\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Adopt the integrated design of RF baseband, which integrates DC\/DC, LDO, LNA, RF front-end, baseband processing, 32-bit RISC based chip, RAM, FLASH storage, RTC and power management functions\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003ch2\u003e\n    Specification\n   \u003c\/h2\u003e\n   \u003ctable class=\"tg\" data-style=\"undefined;table-layout: fixed; width: 816px;\"\u003e\n    \u003cthead\u003e\n     \u003ctr\u003e\n      \u003cth class=\"tg-680y\" colspan=\"2\"\u003e\n       parameters\n      \u003c\/th\u003e\n      \u003cth class=\"tg-680y\"\u003e\n       values\n      \u003c\/th\u003e\n     \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\" colspan=\"2\"\u003e\n       Supply voltage\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       3.3V\/5V\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\" colspan=\"2\"\u003e\n       Working current\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       up to 60mA\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\" colspan=\"2\"\u003e\n       Interface\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       UART\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\" colspan=\"2\"\u003e\n       Time of warm start\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       4s\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\" colspan=\"2\"\u003e\n       Time of cold boot\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       30s\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\" colspan=\"2\"\u003e\n       Working Temperature\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       -35C-85°C\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\" colspan=\"2\"\u003e\n       Storage Temperature\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       -55°C-100°C\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\" colspan=\"2\"\u003e\n       Humidity\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       5%-95%\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\" rowspan=\"4\"\u003e\n       Time of Positioning\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Pure hardware cold start\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       27.5s\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Pure hardware hot start\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       \u0026lt;1S\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Pure hardware recapture\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       \u0026lt;1S\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Software-assisted A-GNSS\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       \u0026lt;5S\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\" rowspan=\"4\"\u003e\n       Sensitivity\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Cold start\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       -148dBm\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Hot Start\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       -162dBm\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Recapture\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       -164dBm\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Track\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       -166dBm\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\" rowspan=\"4\"\u003e\n       Accuracy\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Horizontal positioning accuracy\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       2.5m\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       High positioning accuracy\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       3.5m\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Speed accuracy\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       0.1m\/s\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Time transfer accuracy\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       30ns\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\" rowspan=\"4\"\u003e\n       Consumption\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Capture current value@3.3V\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       42.6mA\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Tracking current value@3.3V\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       36.7mA\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Low power mode@3.3V\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       0.85mA\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n     \u003ctr\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       Ultra-low-power mode@3.3V\n      \u003c\/td\u003e\n      \u003ctd class=\"tg-q7v3\"\u003e\n       31uA\n      \u003c\/td\u003e\n     \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n   \u003c\/table\u003e\n   \u003cp\u003e\n   \u003c\/p\u003e\n   \u003cp\u003e\n   \u003c\/p\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":56578271641981,"sku":"614-9E8-A7B","price":10.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Grove-GPS-Air530-4.jpg?v=1753831435"}],"url":"https:\/\/www.unmannedtechshop.co.uk\/collections\/sensors.oembed?page=5","provider":"Unmanned Tech","version":"1.0","type":"link"}